INSTRUCTION BOOKLET INTEGRATED COOKER HOOD TH 500
Thank you for buying a Zanussi product. To enable you to use your appliance effectively and safely, please read this instruction book carefully before using the appliance and retain for future reference. If you require guidance in the use of the appliance or require further information on Zanussi Products, please contact our Customer Care Department.
IMPORTANT SAFETY INFORMATION These warnings are provided in the interests of your safety. Ensure that you understand them all before installing or using this appliance. Your safety is of paramount importance. If you are unsure about any of the meanings of these warnings contact the Customer Care Department. ■ • If other types of flue or appliances are fitted ensure that there is an adequate supply of air to the room.
YOUR APPLIANCE OPERATING INSTRUCTIONS This cooker hood is designed to extract unpleasant odours from the kitchen, it will not extract steam. Cooker Hood Controls The cooker hood functions are controlled by three slider switches which are located in a fold away control box on the right hand side. Automatic Microswitch The microswitch overrides the controls, and switches off the hood when the visor is closed. When the visor is opened the hood will resume the function of previous setting.
The appliance can be installed to recirculate or extract contaminated air. However, the cooker hood is more effective in the extraction mode. Recirculation The contaminated air is cleaned by passing through the filters and then back into the kitchen. Extraction The contaminated air enters the hood passing through the grease filter and out through the ducting to the atmosphere. When the ducting position is selected the charcoal filter is not required. Never do flambé cooking under this cooker hood.
MAINTENANCE AND CLEANING Before carrying out any maintenance or cleaning isolate the cooker hood from the mains supply. The cooker hood must be kept clean, a build up of grease or fat can be a fire hazard. External Cleaning The metal casing, grille and visor should be cleaned at least once a month to keep it looking like new. Wipe over the hood with a soft cloth wrung out in mild soapy water and then dry thoroughly. Never use scouring pads or abrasive cleaners as they may scratch or damage the surfaces.
KTo Remove/Replace the Charcoal Filter 1. Open the visor. 2. Remove the metal grease filters. 3. Remove one filter at a time by placing one hand over the filter and releasing the spring retaining clip. 4. Allow the filter to hinge back and then remove. Worktop lighting If the fluorescent strip lamp fails to function first check to ensure that the pins are located into the holder. KReplacing the strip light 1. Remove the lighting diffuser screws, through the end capping on the right hand side. 2.
SOMETHING NOT WORKING If, having followed these instructions carefully, your cooker hood fails to work properly please carry out the following checks. Symptom Solution The cooker hood will not start • Check the hood is connected to the electricity supply. • Check that the fan speed control is set to 1, 2 or 3 The cooker hood is not working effectively • The fan speed is set high enough for the task • The grease filter is clean. • The kitchen is adequately vented to allow the entry of fresh air.
PEACE OF MIND FOR TWENTY FOUR MONTHS STANDARD GUARANTEE CONDITIONS We, Zanussi Ltd., underlake that if within twenty four months of the date of the purchase this ZANUSSI buill-in appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, the company will, at our option repair or replace the same FREE OF ANY CHARGE for labour, materials or carriage on condition that.
INSTALLATION INSTRUCTIONS It is dangerous to alter the specifications or attempt to modify this product in any way. Technical Information DIMENSIONS WEIGHT ELECTRICAL SUPPLY: POWER CONSUMPTION: FAN MOTOR: LAMP: SUITABLE FOR INSTALLATION ABOVE: HEIGHT: WIDTH DEPTH DEPTH WITH VISOR OPEN: GROSS: NET: 38cm 60cm 28cm 45,5cm 14,7kg 12,7kg Voltage (50Hz) 220-240 V 285W 270W 15W OVER ELECTRIC HOB: OVER GAS HOB: SLOT-IN GAS OVEN : SLOT-IN ELECTRIC COOKER: 7KW (max) 10KW (max) 13.5KW (max) 12.
INSTALLING THE COOKER HOOD Please ensure that when the appliance is installed it is easily accessible to an engineer in the event of a breakdown. All installations must comply with the local authorities requirements for the discharge of exhaust air. Incorrect installation may affect the safety of this cooker hood. Installation Requirements Before installation check the wall to which the cooker hood is to be fitted for electric cables, water pipes or gas.
Clearance Height A minimum clearance height of 650mm (25 1/2”) is required when installed above a built-in electric hob, or 700mm (27 1/2”) when installed above a built-in gas hob. A minimum clearance height of 685mm (27”) is required when installed above a slot-in electric oven, or 787mm (30 1/2”) when installed above a slot-in gas oven.
Insert the ducting spigot into the aperture on the top of the cooker hood casing. Fitting the Wall Cabinet If it is necessary to fix the kitchen cabinet to a hollow construction plaster or partition board structure then it must be sufficiently reinforced to be strong enough to support the weight of the cooker hood. Wall Cabinet Preparation Position the cooker hood upside down, ensuring the cooker hood is supported.
KTo adjust the lower casing 1. Pull out the visor. 2. Loosen the two screws immediately in front and behind the butterfly bracket screws. 3. Once the screws have been loosened the lower section of the hood can be moved backward and forward. This will allow the alignment of the decor trim with the wall cabinet above. Care should be taken when carrying out the above operation not to loosen the screws too far, and to ensure that the casing is supported at all times.
Dir.
