User manual

19
Minimum adjustment screw
When the hob has been fully installed it will be
necessary to check the minimum flame setting. To
do this, follow the procedure below.
- Turn the gas tap to the MAX position and
ignite.
- Set the gas tap to the MIN flame position then
turn the control knob from MIN to MAX
several times. If the flame is unstable or is
extinguished follow the procedure below.
Procedure:
Re-ignite the burner and set to MIN.
Remove the control knob, use a thin
bladed screwdriver to turn the
adjustment screw. Check the flame is
steady and does not extinguish when the
knob is turned from MIN to MAX. Repeat
this procedure for all burners.
Technical Maintenance
Check at regular intervals the condition and
serviceability of the gas connection hose and
pressure regulator, if any is fitted; in case of
malfunction, do not repair but replace the whole
faulty part.
To ensure a smooth and safe operation, it is
necessary to periodically grease the gas taps.
Commissioning
)