User manual

17
FO 2041
FO 2042
Fig. 3 Fig. 4
FO 0199
Carry out the building in of the hob as follows:
• put the seals supplied with the hob
on the edges of the cut out, taking
care that the seals meet without
overlapping;
• place the hob in the cut out, taking
care that it is centred;
• fix the hob with the relevant fixing
clamps and screws, as shown in Fig.
5. When the screws have been
tightened, the excess seal can be
removed.
The edge of the hob forms a double seal which
prevents the ingress of liquids.
Fitting the hob to the worktop
Seal
Fig. 5
)