User manual

16
Building over a cupboard or drawer
If the hob is to be installed above a cupboard or
drawer it will be necessary to fit a heat resistant
board below the base of the hob on the underside
of the work surface.
Building over a kitchen unit with door
Proper arrangements must be taken in designing
the furniture unit, in order to avoid any contact with
the bottom of the hob which can be heated when
it is operated. The recommended solution is shown
in the Fig. 1.
The panel fitted under the hob ("a") should be
easily removable to allow easy access if technical
assistance is needed. The space behind the
kitchen unit ("b") can be used for connections.
a) Removable panel
b) Room for connections
FO 2166
Building over a kitchen unit with oven
If the hob is built into a kitchen unit with an oven
underneath, the recess must have the dimensions
shown in Fig. 2, and should also incorporate
suitable oven crosspiece supports to ensure an
efficient cooling air circulation.
Figures 3 and 4 give two building-in examples.
The electric connection of the hob and
the oven should be carried out
separately, for electrical safety reasons
to permit easy extraction of the oven
from the front part of the kitchen unit.
Fig. 1
Fig. 2