User manual

7
Charcoal Filter
The charcoal lter cannot be cleaned.
The lter should be replaced at least every
three months or more frequently if the hood
is used more than three hours per day.
To Remove/Replace the Charcoal
Filter
1. Remove the metal inlet grille.
2. Carefully turn the disk (C) anti-clockwise and
remove the the charcoal lter (B) from the motor
support (A) as illustrated opposite.
3. Clean the metal inlet grille and motor support
before replacing the charcoal lter.
4. Place the new charcoal lter (B) over the motor
support (A), and while holding the lter securely
insert the disk (C) and turn clockwise.
Changing the Light Bulb
If the light bulb fails to function check that the bulb is
screwed into the holder.
If bulb failure has occurred then it should be
replaced with a 220-240V 40W clear
cylindrical shape bulb with a small E14 screw
thread.
Charcoal lters, grease lters and light
bulbs can be obtained from your local
Service Force Centre
This appliance can be a re hazard if the grease
and charcoal lters are not replaced as recom-
mended.