24971146 IZ10...IZ16.
124971146 IZ10...IZ16.qxd 8/27/01 8:55 PM Pagina 2 (Nero/Process Black pellicola) Important Safety Information It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant warnings.
124971146 IZ10...IZ16.
124971146 IZ10...IZ16.qxd 8/27/01 8:55 PM Pagina 4 (Nero/Process Black pellicola) Your New Washing Machine Your new washing machine, fitted with the Zanussi “JET SYSTEM”, meets all modern requirements for effective treatment of laundry with low water, energy and detergent consumption. Even small loads are washed “economically” because the amount of water used is regulated automatically according to the load and type of fabric.
124971146 IZ10...IZ16.
124971146 IZ10...IZ16.
124971146 IZ10...IZ16.qxd 8/27/01 8:55 PM Pagina 7 (Nero/Process Black pellicola) 8 Display • Draining and spin: - Press the START/PAUSE button. The machine will drain the water, then spin the laundry at the maximum speed provided for the selected programme. - Select spin speed by means of button 5, and press the START/PAUSE button. • Drain only - Press the SKIP/RESET button once, so as to cause the DRAIN light to light up, then press the START/PAUSE button.
124971146 IZ10...IZ16.qxd 8/27/01 8:55 PM Pagina 8 (Nero/Process Black pellicola) 9 START/PAUSE button Important! The first time you use the washing machine, when you switch it on, it may display a blinking zero and give an audible warning signal. This is due to the fact that the washing machine has performed a washing cycle during the manufacturer’s inspection tests, and this cycle has not been erased after its completion.
124971146 IZ10...IZ16.qxd 8/27/01 8:55 PM Pagina 9 (Nero/Process Black pellicola) 11 DELAY button The SKIP button is then used to cancel or advance the programme to the required phase. The SKIP button can only operate when the programme is in pause. A normal wash cycle consists of the following phases, Wash - Rinses - Spin and is confirmed by the illumination of the corresponding LED,s. This button makes it possible to delay the starting of the programme by up to 24 hours.
124971146 IZ10...IZ16.qxd 8/27/01 8:55 PM Pagina 10 (Nero/Process Black pellicola) Operating Sequence 4. Switch the machine on Before the first wash, we recommend that you run a cotton cycle at 60°C, without any laundry in the machine, to remove any manufacturing residue from the drum and tub. Pour 1/2 a measure of detergent into the dispenser drawer and start the machine. Press the ON/OFF button to switch the machine on. The display will show three blinking dashes or a blinking zero.
124971146 IZ10...IZ16.qxd 8/27/01 8:55 PM Pagina 11 (Nero/Process Black pellicola) 6. Select the temperature 9. Select the QUICK WASH option Press the TEMPERATURE button if you wish to select a temperature value different from the one proposed by the washing machine. The relevant light will light up. Depress TIME SAVE button to select the QUICK WASH option, if your laundry is only slightly soiled. The relevant light illuminates.
4971146 IZ10...IZ16.qxd 8/27/01 8:55 PM Pagina 12 (Nero/Process Black pellicola) 12. How to change a programme during its cycle After approximately 2 minutes, you can open the door. Pay attention to the level and temperature of the water in the washing machine! When you close the door and press the ON/OFF button again, the washing machine will resume the programme from the point where it had been interrupted.
124971146 IZ10...IZ16.qxd 8/27/01 8:55 PM Pagina 13 (Nero/Process Black pellicola) Washing Hints Do NOT overload the machine. Weigh the laundry the first few times you use the appliance.
124971146 IZ10...IZ16.qxd 8/27/01 8:55 PM Pagina 14 (Nero/Process Black pellicola) Which detergent?.... And in which form? To ensure you obtain the best wash results from your appliance, it is important to use the right detergent in your everyday wash, and only detergents recommended for use in automatic machines.
124971146 IZ10...IZ16.qxd 8/27/01 8:55 PM Pagina 15 (Nero/Process Black pellicola) Wash Care Symbols Wash care labels inside garments recommend how to launder your clothes with the best results. The care labelling code is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correct programme on your washing machine.
124971146 IZ10...IZ16.qxd 8/27/01 8:55 PM Pagina 16 (Nero/Process Black pellicola) Washing programmes Type of laundry and symbols on labels 60 Load 5 kg 95 White cotton: e.g. sheets, tablecloths, household linen 60 40 5 kg 30 Coloured cotton: e.g. shirts, blouses, underwear, towels, household linen 60 50 40 30 30 30 Consumption* Available options Energy kWh Water litres Time h/min. Main wash at 60°-90°C 3 rinses Long spin SPIN SPEED RINSE HOLD PREWASH SUPER RINSE QUICK 1.
124971146 IZ10...IZ16.qxd 8/27/01 8:55 PM Pagina 17 (Nero/Process Black pellicola) Maintenance and Cleaning Before any maintenance or cleaning is carried out you must DISCONNECT the appliance from the electricity supply. Descaling The water we use normally contains lime. It is a good idea to periodically use a water softening powder in the machine. Do this separately from any laundry washing, and according to the softening powder manufacturer's instructions.
124971146 IZ10...IZ16.qxd 8/27/01 8:55 PM Pagina 18 (Nero/Process Black pellicola) The dangers of freezing When no more water comes out, unscrew the filter and remove it. If the machine is exposed to temperatures below 0°C, certain precautions should be taken. ● Turn off the water tap. ● Unscrew the inlet hose. ● Place the end of the inlet hose and that of the emergency emptying hose in a bowl placed on the floor and let the water drain out.
124971146 IZ10...IZ16.qxd 8/27/01 8:55 PM Pagina 19 (Nero/Process Black pellicola) Something Not Working Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your local Service Force Centre, please carry out the checks listed below.
124971146 IZ10...IZ16.qxd 8/27/01 8:55 PM Pagina 20 (Nero/Process Black pellicola) Symptom Possible causes The machine vibrates when spinning ● ● ● ● ● The door will not open The internal packing has not been removed. The machine is in contact with the wall or furniture. The machine is not level and stable (check diagonally). The washing load is badly distributed in the drum. Maybe there is very little laundry in the drum. ● The water level is above the bottom edge of the door.
124971146 IZ10...IZ16.
124971146 IZ10...IZ16.
124971146 IZ10...IZ16.qxd 8/27/01 8:55 PM Pagina 23 (Nero/Process Black pellicola) To contact your local Service Force Centre telephone 08705 LONDON & EAST ANGLIA MIDLANDS BIRMINGHAM 66 Birch Road East Wyrley Trading Estate Witton Birmingham B6 7DB BOURNE Pinfold Road Bourne PE10 9HT BRIDGNORTH 68 St.
124971146 IZ10...IZ16.qxd 8/27/01 8:55 PM Pagina 24 (Nero/Process Black pellicola) Installation Instructions It is dangerous to alter the specifications or attempt to modify this product in any way. Care must be taken to ensure that the appliance does not stand on the electrical supply cable. Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.
124971146 IZ10...IZ16.qxd 8/27/01 8:55 PM Pagina 25 (Nero/Process Black pellicola) Unpacking Positioning Install the machine on a flat hard floor. Make sure that air circulation around the machine is not impeded by carpets, rugs etc. Check that the machine does not touch the wall or other kitchen units. Never place cardboard, wood or similar materials under the machine to compensate for any unevenness in the floor.
124971146 IZ10...IZ16.qxd 8/27/01 8:55 PM Pagina 26 (Nero/Process Black pellicola) If you cannot make the cold water connection direct from the rising mains, you may be able to operate the appliance from your cold water storage system. There should be a minimum distance of 5.02m (16.5 ft) between the appliance’s inlet and the bottom of the water storage tank. Set the hose correctly by loosening the ring nut. After positioning the inlet hose, be sure to tighten the ring nut again to prevent leaks.
124971146 IZ10...IZ16.qxd 8/27/01 8:55 PM Pagina 27 (Nero/Process Black pellicola) Levelling In the interest of the environment Level the washing machine by raising or lowering the feet. The feet may be tight to adjust as they incorporate a self locking nut, but the machine MUST be level and stable (check diagonally).
124971146 IZ10...IZ16.qxd 8/27/01 8:55 PM Pagina 28 (Nero/Process Black pellicola) Electrical connection The wire coloured brown must be connected to the terminal marked «L» or coloured red. Upon completion there must be no cut, or stray strands of wire present and the cord clamp must be secure over the outer sheath. Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. WARNING: THIS APPLIANCE MUST BE EARTHED.
124971146 IZ10...IZ16.qxd 8/27/01 8:55 PM Pagina 30 (Nero/Process Black pellicola) From the Electrolux Group. The world’s No. 1 choice. The Electrolux Group is the world's largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more than 150 countries around the world.