Instruction manual

Changing the light bulb
Warning!
There is a risk of electric shocks! Before changing the light
bulb, switch off the appliance and unplug it, or pull the fuse or the
circuit breaker.
Light bulb data:220~240 V, max. 15 W
To switch off the appliance, turn the temperature regulator to position
“0”.
Unplug the mains plug.
To change the light bulb, undo the
screw.
Press the light bulb cover as shown
and slide it backwards.
Change the defective light bulb.
Refit the light bulb cover and the
screw.
Put the refrigerator back into operation.
Noises during Operation
The following noises are characteristic of refrigeration appliances:
Clicks
Whenever the compressor switches on or off, a click can be heard.
Humming
As soon as the compressor is in operation, you can hear it humming.
Bubbling/
When refrigerant flows into thin tubes, you can hear
Splashing
bubbling or splashing noises. Even after the compressor has been
switched off, this noise can be heard for a short time.
18
Downloaded from Fridge-Manual.com Manuals