32992270 gb.
132992270 gb.qxd 5/8/03 8:44 AM Pagina 2 (Nero/Process Black pellicola) Dear customer, Transport damages Please read these operating instructions carefully and pay particular attention to the safety notes indicated in the first pages. We recommend that you keep this instruction booklet for future reference and pass it on to any future owners. When unpacking the appliance, check that it is not damaged. If in doubt, do not use it and contact the Service Centre.
132992270 gb.qxd 5/8/03 8:44 AM Pagina 3 (Nero/Process Black pellicola) The following warnings are provided in the interests of overall safety. You must read them carefully before installing or using the appliance. Installation • Leave the porthole door slightly ajar when the appliance is not in use. This preserves the door seal and prevents the formation of musty smells. • All internal packing must be removed before using the appliance.
132992270 gb.qxd 5/8/03 8:44 AM Pagina 4 (Nero/Process Black pellicola) Disposal Packaging materials The materials marked with the symbol recyclable. Machine are Use authorised disposal sites for your old appliance. Help to keep your country tidy! >PE<=polyethylene >PS<=polystyrene >PP<=polypropylene This means that they can be recycled by disposing of them properly in appropriate collection containers.
132992270 gb.qxd 5/8/03 8:44 AM Pagina 5 (Nero/Process Black pellicola) Unpacking Positioning and levelling Install the machine on a flat hard floor. Make sure that air circulation around the machine is not impeded by carpets, rugs etc. Check that the machine does not touch the wall or other kitchen units. Carefully level by screwing the adjustable feet in or out. Never place cardboard, wood or similar materials under the machine to compensate for any unevenness in the floor.
132992270 gb.qxd 5/8/03 8:45 AM Pagina 6 (Nero/Process Black pellicola) Water drainage Electrical connection The end of the drain hose can be positioned in three ways: This machine is designed to operate on a 220-230 V, single-phase, 50 Hz supply. Hooked over the edge of a sink using the plastic hose guide supplied with the machine. In this case, make sure the end cannot come unhooked when the machine is emptying.
132992270 gb.qxd 5/8/03 8:45 AM Pagina 7 (Nero/Process Black pellicola) This new machine meets all modern requirements for effective treatment of laundry with low water, energy and detergent consumption. • The temperature selector dial will allow you to choose the most suitable temperature for your laundry. • The automatic cooling of the washing water from 95° to 60°C before draining will prevent old drain pipes from being deformed.
132992270 gb.qxd 5/8/03 8:45 AM Pagina 8 (Nero/Process Black pellicola) Use Control panel FLV 954 NN B B B A C D F G 60°- 95° 30°- 60° 40º- 60°E 60°- 95° 60° 40° J 30°- 60° - 40° K - 40° L H 30°- 60° M N P ELECTRONICTEMPERATURECONTROL 1 2 3 4 5 1 Detergent dispenser drawer 6 7 8 5 Door opening button Depress it to open the door. 2 ON/OFF button By depressing this button the machine is switched on. By depressing it again the machine is switched off.
5/8/03 8:45 AM Pagina 9 (Nero/Process Black pellicola) Washing hints ENGLISH 132992270 gb.qxd Laundry weights The following weights are indicative: Sorting the laundry bathrobe Follow the wash code symbols on each garment label and the manufacturer’s washing instructions. Sort the laundry as follows: whites, coloureds, synthetics, delicates, woollens. napkin Temperatures 95° 60° for normally soiled white cottons and linen (e.g. tea cloths, towels, tablecloths, sheets...
132992270 gb.qxd 5/8/03 8:45 AM Pagina 10 (Nero/Process Black pellicola) Red wine: soak in water and detergent, rinse and treat with acetic or citric acid, then rinse. Treat any residual marks with bleach. Follow the product manufacturer’s recommendations on quantities to use and do not exceed the «MAX» mark in the detergent dispenser drawer.
5/8/03 8:45 AM Pagina 11 (Nero/Process Black pellicola) Operating sequence 4. Select the desired option Before washing your first load of laundry, we recommend that you run a cotton cycle at 60°C, with the machine empty, in order to remove any manufacturing residue from the drum and tub. Pour half a measure of detergent into the main wash compartment and start up the machine. Depress the required button. 1. Place the laundry in the drum Open the door by pressing button .
132992270 gb.qxd 5/8/03 8:45 AM Pagina 12 (Nero/Process Black pellicola) 7. At the end of the programme The machine stops automatically. The mains on light goes out. Turn the drum by hand to make sure it is completely empty, so as to avoid any forgotten items being damaged in a subsequent wash (e.g. shrinking) or their colour running into a load of whites.
2992270 gb.qxd 5/8/03 8:45 AM Pagina 13 (Nero/Process Black pellicola) ENGLISH Programme table Washing programmes for cotton and linen Max. load: 3 kg Progr. A B B B C D F Rinses G Long spin Temp.
132992270 gb.qxd 5/8/03 8:45 AM Pagina 14 (Nero/Process Black pellicola) Programme table Washing programmes for synthetics, mixed fabrics, delicates and wool Max. load:1 kg, wool 0.7 kg Progr. Temp.
132992270 gb.qxd 5/8/03 8:45 AM Pagina 15 (Nero/Process Black pellicola) Bodywork Detergent can also accumulate inside the drawer recess: clean it with an old toothbrush. Refit the drawer after cleaning. Clean the outside of the machine with soap and water only. Rinse with clean water and dry with a soft cloth. Important: do not use methylated spirits, solvents or similar products to clean the bodywork.
132992270 gb.qxd 5/8/03 8:45 AM Pagina 16 (Nero/Process Black pellicola) Emergency emptying out Frost precautions If the water is not discharged, proceed as follows to empty out the machine: If the machine is installed in a place where the temperature could drop below 0°C, proceed as follows: • pull out the plug from the power socket; • Close the water tap and unscrew the water inlet hose from the tap.
132992270 gb.qxd 5/8/03 8:45 AM Pagina 17 (Nero/Process Black pellicola) Problems which you can resolve yourself. Problem Possible cause • The machine does not start up: • The door is not firmly closed. • The machine is not plugged in or there is no power at the socket. • The main fuse has blown. • The programme selector dial is not positioned correctly • The ON/OFF button has not been depressed. • The machine does not fill: • The water tap is closed. • The inlet hose is squashed or kinked.
132992270 gb.qxd 5/8/03 8:45 AM Pagina 18 (Nero/Process Black pellicola) Problem Possible cause • Water is not visible in the machine: • The machine, which is the result of modern technology, runs in a very economical way with low water consumption. Performance is nevertheless excellent. • The machine makes an unusual noise: • The machine is fitted with a type of motor which makes an unusual noise compared with other traditional motors.