WASHING MACHINE FLS 879 C FLS - 879C 2 2 2 3 4 5 6 7 8 9 10 11 12 13 1 13 12 3 1 11 4 10 9 8 7 6 ° 5 80 30° 90° 70° 60° 50° 40 ° INSTRUCTION BOOKLET 35.292.
i Your New Washing Machine Your new washing machine, meets all modern needs for effective treatment of laundry with low water, energy and detergent consumption. ■ ■ In the interest of the environment The special wool programme with its new delicate wash system treats your woollen with extreme gentleness. The anti-unbalance device ensures that the washing machine remains stable when spinning.
Important Safety Information It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant warnings. These warnings have been provided in the interest of safety.
Contents For the User For the Installer Your New Washing Machine Important Safety Information Description of the Appliance The Control Panel Operating sequence Before the first use Load the laundry Measure out the detergent Measure out the additive Select the temperature Select the required programme Start the machine At the end of the programme Washing Programmes Washing Hints Wash Care Symbols Maintenance and Cleaning Installation Instructions Technical Specifications 2 3 Unpacking Positioning Water
Description of the Appliance Detergent dispenser drawer Programme guide “Mains-on” light “Options” buttons Temperature selector dial Program selector dial & ON/OFF switch Door opening handle Filter Adjustable feet 1 2 3 4 5 6 FLS - 879C 2 2 2 3 4 5 6 7 8 9 10 11 12 13 1 13 12 3 1 11 4 10 9 5 8 7 6 80 ° 30° 90° 60° 50° 40 70° ° 1 2 3 4 5 6 7 8 9 7 8 9 Detergent dispenser drawer Prewash Wash Fabric softener AL035 5
The Control Panel FLS - 879C 2 2 2 3 4 5 6 7 8 9 10 11 12 13 1 13 12 3 1 11 30° 60° 50° 4 0° 1 Programme Guide 5 6 70° 4 6 3 8 7 2 5 4 10 9 90° 80 ° 1 7 5 Reduced spin button By depressing this button the spin speed will be reduced as follows: - cotton and linen programmes: from 850 to 400 rpm - synthetics, delicates and wool programmes: from 540 to 380 rpm 2 ON/OFF LAMP It lights when the appliance is operating.
Operating Sequence i Before your first wash, we recommend that you run a cotton cycle at 60°C, without any laundry in the machine, to remove any manufacturing residue from the drum and tub. Pour 1/2 a measure of detergent into the dispenser drawer and start the machine. 1. Load the laundry Open the door. Place the laundry in the drum, one item at a time, shaking them out as much as possible. Close the door.
5. Select the required programme Turn the programme selector dial CLOCKWISE to the required programme. 2 P0215 6. Start the machine Before starting up the machine check that: ■ the appliance is plugged in ■ the water supply tap is turned on ■ the door and the detergent dispenser drawer are closed. Pull the programme selector selector dial outwards, the operating pilot light will illuminate and the machine will start operating. 2 P0216 7.
Washing Programmes Programmes for cotton and linen Maximum load 5 kg Program.
Washing Programmes Programmes for synthetics, delicates and wool Maximum load 2 kg (wool maximum load 1 kg) Program.
i Washing Hints Do NOT overload the machine. Weigh the laundry the first few times you use the appliance.
Wash Care Symbols Wash care labels inside garments recommend how to launder your clothes with the best results. The care labelling code is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correct programme on your washing machine. WASHING SYMBOL WASH ACTION 95 Normal (Maximum) White Cotton or Linen without Special Finishes 60 Normal (Maximum) Cotton, Linen or Viscose without Special Finishes Colour fast at 60°C.
Maintenance and Cleaning Before any maintenance or cleaning is carried out you must DISCONNECT tha appliance from the electricity supply Descaling The water we normally use contains lime. It is a good idea to periodically use a water softening powder in the machine. Do this separately from any laundry washing, and according to the softening powder manufacturer's instructions. This will help to prevent the formation of lime deposits. After each wash Leave the door open for a while.
Cleaning the filter The water drain filter A clean filter is important for the correct functioning of the machine, and should therefore be cleaned after every washing programme. Open the filter door and place a container underneath to catch any spillage. If the filter is blocked and the machine is unable to drain you will need to drain the water manually from the machine at this stage. To do this, unhook the drain hose from the standpipe or sink and hold the end of the hose over a bowl on the floor.
Something Not Working Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your Local service Force Centre, please carry out the checks listed below.
Symptom Possible causes The door will not open ■ ■ ■ The programme is still running. The door lock has not yet released The water level in the drum is too high or the machine is heating. Spinning starts late or the machine does not spin ■ The electronic unbalance detection device has cut in because the laundry is not evenly distributed in the drum. The laundry is redistributed by reverse rotation of the drum.
Installation Instructions It is dangerous to alter the specifications or attempt to modify this product in any way. Care must be taken to ensure that the appliance does not stand on the electrical supply cable. Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person.
Unpacking Before starting the machine up, the transport security bolts must be removed as follows: You are advised to keep all the packaging for re-use in case the appliance has to be transported again. ■ Unscrew and remove the three rear transit bolts (using a spanner). P0287 ■ Lay the machine gently on its back, making sure that the hoses are not squashed. We suggest a polystyrene angle bracket from the packing is placed on the floor before tilting it back to avoid the hoses being squashed.
Positioning Your new Zanussi washing machine has been designed to be permanently plumbed in to you home’s water supply and drainage system. However, if this is not possible, it may be connected to suitable existing taps, with the drain hose discharging into the sink. Water inlet There should be a COLD WATER tap near the washing machine with a screwing on connection pipe of 3/4 gas for the water supply, a sink, a wash basin or a drainage system in the wall. Previously check if: ■ it is not a hot water tap.
Water drainage If you intend the drain hose from the machine to empty into a sink, make sure that the sink is empty and that the plug hole is not blocked. Place the drain hose in the sink with the aid of the bent piece delivered separately. The bent piece has to be entered into the tube´s mouth in order to assure the support..
Levelling Level the washing machine by loosening or tightening the feet. Once in the right position fix the feet by pushing the nuts against the base of the case Accurate levelling prevents vibration, noise and displacement of the machine during operation. After levelling the machine, secure the feet by tightening the ring nuts with the aid of a screwdriver. Some vibration is inevitable, especially if mounted on a wooden floor. Sprung wooden floors are particularly susceptible to vibration.
Electrical connections Any electrical work required to install this appliance should be carried out by a qualified electrician.or competent person WARNING: THIS APPLIANCE MUST BE EARTHED. The manufacturer declines any liability should this safety measure not be observed. Before switching on, make sure the electricity supply voltage is the same as that indicated on the appliace rating plate.(the plate is sticked to the rear of the appliance). The appliance is supplied with a 10 amp plug fitted.
EPESL