User manual

32
Menus
❍
Pour les DVD+R, +RW
System Options
The System Options menu in the Setup menu offers
you settings to configure certain useful functions and
optimise the performances of your DVD recorder to
match those of the devices connected to it.
Note: the explanation of the various functions of this menu are detailed below.The associated illustrations
show the corresponding adjustments or functions.
DivX
Selecting Divx displays the authorisation number.
Digital output (audio)
Depending on the amplifier or television (with or without integrated
decoder) connected to your DVD recorder, you will need to set the
DIGITAL AUDIO OUT sockets (coaxial or optical) so that they deliver
the Dolby Digital, DTS or MPEG digital signals supported by the other
device.Tick Dolby Digital or DTS if the amplifier or TV set has a Dolby
Digital or DTS decoder (or both, depending on devices). MPEG must be
ticked to play a DVD disc on which the sound was recorded using MPEG
standard.
QSound/Qxpander
This function provides you with virtual reproduction of the multichannel
sound of a Dolby or DTS film onto the two channels of your TV or stereo
amplifier.The sound effects of a 5.1 system are then simulated .
Note:The name and logo are registered trademarks of Qsounds Labs Inc.
Laboratories.The TruSuround
®
technology is used under license from SRS
Labs Inc. laboratories.
Standby mode
Your DVD recorder has an Eco Standby to reduce its power consumption
when on stand-by. Select Eco.Standby to enable this function.
Note
:
the Eco function does not allow the display of programming warning messages
on the display panel. Only the record icon will flash.
AV link
Allows a television set to control your DVD recorder and download the
same channels to the same numbers during installation of channels.
Note
:
this function is positioned by default on On.
AV2 Input
Choose the S-Video or Video signal, depending on the device connected to
the AV2 Scart socket (usually a satellite or cable receiver), select RGB,
S-Video or CVBS. If you do not know the type of signal supplied by the
connected device, try each of the settings to obtain the best result.
Note
:
format of image signals:
RGB: English signal colour code (Red - Green - Blue).This is best quality.
S-Video S-VHS (Y/C), signals with separate colour components and brightness.This is
average quality.
CVBS: composite video signals.This is poor quality.
Your television set
Audio
output socket
Scart connector
MENU è Setup è System Options è OK.
02_DTH8560_en.qxd 23/09/05 14:45 Page 32