Owner`s manual

Controlling the Rest of Your System
45
Notes:
• If you assign a preset code for the
TUN
button, you will not be able to control
the built-in tuner using the remote. Reset
the remote to the built-in tuner by
entering the preset code 7008.
• To erase the preset code for the current
MULTI CONTROL button, enter 0000 as
the preset code.
4 Repeat steps 1 through 3 for the
other components you want to
control.
Searching for Preset
Codes
Another way of entering preset codes is to
use the search feature. The remote transmits
batches of 10 codes; when you see the
component you want to control respond (by
turning on or off), you just scan through the
last 10 codes until you find the right one.
MENU
CHANNEL
ENTER
ENTER
MPX/RETURNDTV INFO
DTV/DISP DTV MENU
D ACCESS T EDIT/GUIDE
P-SET P-SET
TUNING
TUNING
T
P
S
E
U
CLASS
FL DIMMER
BAND
TOP MENU AUDIO
SUB TITLE
REMOTE SETUP
RECEIVER CONTROL
STANDARD ADV SURR STEREO
ANGLE
1¡
4
¢
7
8
3
¶
LEVEL
DVD VCR CD-RTV
RCV
TUN
TVC
CD
TEST TONE
CH SELECT
INPUT ATT
INPUT SEL.
MUTE
NIGHT
LOUD
SIGNAL SEL
MULTI CONTROL
EFFECT
+10
RECEIVER
POWER
SOURCE
POWER
1
2
3
4
5
6
7
8
9
0
DISC
1 Switch on the component you
want to control.
If the component is some kind of player
(CD player, VCR, etc.), start it playing.
2 Press and hold REMOTE SETUP
for three seconds.
The LED lights steadily for two seconds.
3 Press the MULTI CONTROL button
for the component you want to
control.
4 Press and hold SETUP for three
seconds.
A batch of 10 codes is transmitted and
the LED blinks during transmission. If
the component responds by stopping or
switching off, go to the next step,
otherwise repeat this step.
5 Switch the component back on or
restart playback.
6 Use ’ and ‘ to scan through the
last 10 codes transmitted to
identify the correct code.
Stop when you see the component stop
or switch off.
You can also verify you have the correct
code by adjusting the volume or testing
other controls on the component.
7 Press and hold ENTER for three
seconds to save the preset code.