Owner`s manual

30
Playing Sources
Music
Simulates the acoustic environment of a
large concert hall and is suitable for music or
musical sources marked 1 ( )
or
R
.
Virtual Rear Center Channel (VIRTL SB)
The Virtual Rear Center Channel effect
simulates 6.1 surround channel listening,
giving the impression that there are two
surround back speakers in your system
when listening to a 5.1 channel source.
Expanded
This mode is especially designed to give
sound depth to stereo sources. The overall
effect builds a dynamic and broad sound
space, allowing two-channel (stereo) signals
to imitate a five speaker sound. Use with
Dolby Pro Logic for a stereo surround effect.
You can also use with Dolby Digital sources
for a wider stereo field than the Standard
modes.
5-Channel Stereo
This can be selected to give multi-channel
sound to a stereo source, using all of the
speakers in your setup.
Choosing the Input
Signal
You need to hook up a component to both
analog and digital inputs on the back of the
receiver to select between input signals.
CHANNEL
ENTER
ENTER
MPX/RETURNDTV INFO
DTV/DISP DTV MENU
D ACCESS T EDIT/GUIDE
P-SET P-SET
TUNING
TUNING
T
P
S
E
U
CLASS
FL DIMMER
BAND
TOP MENU AUDIO
SUB TITLE
REMOTE SETUP
RECEIVER CONTROL
STANDARD ADV SURR STEREO
ANGLE
1¡
4
¢
7
8
3
¶
LEVEL
DVD VCR CD-RTV
RCV
TUN
TVC
CD
TEST TONE
CH SELECT
INPUT ATT
INPUT SEL.
MUTE
NIGHT
LOUD
SIGNAL SEL
MULTI CONTROL
EFFECT+10
RECEIVER
POWER
SOURCE
POWER
1
2
3
4
5
6
7
8
9
0
DISC
1 Press SIGNAL SEL (SIGNAL
SELECT
on the front panel) to
select the input signal correspond-
ing to the source component.
Each press switches between AUTO, DVD
5.1 ch, ANALOG and DIGITAL. The
default is AUTO.
DVD 5.1 ch will only appear when DVD
is selected using the remote or the MULTI
JOG dial on the front panel.
When set to DIGITAL, 2 DIGITAL lights
when a Dolby Digital signal is input, and
DTS lights when a DTS signal is input.
Note:
• This receiver can only play back Dolby
Digital, PCM (32kHz, 44kHz, 48kHz,
and 96 kHz) and DTS digital signal
formats. With other digital signal
formats, set to
ANALOG.
• You may get noise when playing a DTS
disc through the analog outputs on a
DTS-compatible LD or CD player. For
proper playback, set the signal input to
DIGITAL.