Owner`s manual

24
Controls and Displays
11 SIGNAL SELECT button (pages 30,
32–33)
Use to select an analog or digital signal.
12 MIDNIGHT button (page 32)
Use Midnight when listening to movie
soundtracks at low volume.
13 SPEAKERS button
Use to cycle through the speaker
system: A = B = A+B
14 MONITOR button
Press to switch tape monitoring on/off.
15 TONE buttons
Press this button to access the bass and
treble controls, which you can then
adjust with the
MULTI JOG dial.
16 SETUP button
17 VIDEO INPUT (page 17)
18 FL DIMMER button
Use this button to make the fluorescent
display (FL) dimmer or brighter.
19 INPUT ATT button
Use to attenuate (lower) the level of an
analog input signal to prevent distortion.
20 MPX button (page 40)
Press to receive a radio broadcast in
mono.
21 BAND button (page 40)
Switches between AM and FM radio
bands.
22 CLASS button (pages 41–42)
Switches between the three banks
(classes) of station presets.
23 TUNER EDIT button (pages 41–42)
Press to memorize and name a station for
recall using the
P-SET }/] buttons on
the remote.
Display
1 SIGNAL SELECT indicators
Lights to indicate the type of input signal
assigned for the current component:
AUTO
Lights when AUTO signal select is on.
DIGITAL
Lights when a digital audio signal is
detected.
2 DIGITAL
Lights when a Dolby Digital signal is
detected.
ANALOG
Lights when an analog signal is detected.
DTS
Lights when a DTS signal is detected.
dB
SIGNAL
DIGITAL DIGITAL
ANALOG DTS
DIGITAL ATT DIRECT
MIDNIGHT
LOUDNESS MONO SP A B
STEREO
TUNED
MONITOR
PROLOGIC
ADV.SURR.
AUTO
1
2
3
4
5
6
78
9
10
14
12
11 13