24970992_FLE1015W.
124970992_FLE1015W.qxd 8/27/01 9:12 PM Pagina 2 (Nero/Process Black pellicola) Important Safety Information It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant warnings.
124970992_FLE1015W.
124970992_FLE1015W.qxd 8/27/01 9:12 PM Pagina 4 (Nero/Process Black pellicola) Your New Washing Machine Your new washing machine meets all modern requirements for effective treatment of laundry with low water, energy and detergent consumption. ● ● ● Automatic cooling of the wash water to 60°C before draining, with the 90°C programme. This reduces thermal shock to fabrics, helping to prevent creasing.
124970992_FLE1015W.
124970992_FLE1015W.qxd 8/27/01 9:12 PM Pagina 6 (Nero/Process Black pellicola) The Control Panel FLE 1015 W ON/OFF COTTONS SYNTHETICS DELICATES WOOL 90°C 60°C 50°C 40°C 30°C EM T F A B RI C S 1 2 3 P E R AT U R E 4 PREWASH 1000 900 700 500 SUPER RINSE RINSE HOLD SP IN S PEE D SKIP QUICK OP 5 T IO N S 6 S TA R T / PA U S E 7 RESET 8 9 1 ON/OFF button 5 SPIN SPEED button Press this button to switch the washing machine on.
124970992_FLE1015W.qxd 8/27/01 9:12 PM Pagina 7 (Nero/Process Black pellicola) 7 START/PAUSE button Important! If you accidentally press the SKIP/RESET button more than once, the memory will be cleared. To cause the washing machine to drain the water, select any washing programme by means of the FABRIC button, then press SKIP/RESET three times in order to select the DRAIN position (only the DRAIN light will remain lit).
124970992_FLE1015W.qxd 8/27/01 9:12 PM Pagina 8 (Nero/Process Black pellicola) 9 Programme phase indicator lights A normal wash cycle consists of the following phases, Wash - Rinses - Spin and is confirmed by the illumination of the corresponding LED,s. When you select a programme, the lights relevant to the phases that form the programme light up. PREWASH WASH RINSES RINSE HOLD SPIN DRAIN CLOGGED FILTER END To select rinse & spin, press the SKIP button once, the wash LED goes out.
124970992_FLE1015W.qxd 8/27/01 9:12 PM Pagina 9 (Nero/Process Black pellicola) Operating Sequence 4. Switch the machine on Before the first wash, we recommend that you run a cotton cycle at 60°C, without any laundry in the machine, to remove any manufacturing residue from the drum and tub. Pour 1/2 a measure of detergent into the main wash compartment of the dispenser drawer and start the machine. Press the ON/OFF button to switch the machine on. The light above the button will light up.
124970992_FLE1015W.qxd 8/27/01 9:12 PM Pagina 10 (Nero/Process Black pellicola) 7. Select the spin speed or the RINSE HOLD option 9. Start the programme Press the START/PAUSE button. The relevant light will stop flashing, the DOOR LOCKED light will light up, and only the light relevant to the phase that is in progress will remain lit. Press the SPIN SPEED button repeatedly, in order to select the desired spin speed or the RINSE HOLD option. The relevant light will light up.
124970992_FLE1015W.qxd 8/27/01 9:12 PM Pagina 11 (Nero/Process Black pellicola) 11. How to cancel a programme during its cycle 13. End of programme At the end of the programme, the washing machine stops automatically and gives an audible signal. If you had selected the RINSE HOLD option, the START/PAUSE button light flashes and the light remains lit to indicate that the water must be drained. When the programme has been completed, the light remains lit and the audible signal is given.
4970992_FLE1015W.qxd 8/27/01 9:12 PM Pagina 12 (Nero/Process Black pellicola) Washing Hints Do NOT overload the machine. Weigh the laundry the first few times you use the appliance.
124970992_FLE1015W.qxd 8/27/01 9:12 PM Pagina 13 (Nero/Process Black pellicola) Which detergent?.... And in which form? To ensure you obtain the best wash results from your appliance, it is important to use the right detergent in your everyday wash, and only detergents recommended for use in automatic machines.
124970992_FLE1015W.qxd 8/27/01 9:12 PM Pagina 14 (Nero/Process Black pellicola) Wash Care Symbols Wash care labels inside garments recommend how to launder your clothes with the best results. The care labelling code is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correct programme on your washing machine.
124970992_FLE1015W.qxd 8/27/01 9:12 PM Pagina 15 (Nero/Process Black pellicola) Washing programmes Type of laundry and symbols on labels 60 95 White cotton: e.g. sheets, tablecloths, household linen 60 40 Load 5 kg 5 kg 30 Coloured cotton: e.g. shirts, blouses, underwear, towels, household linen 60 50 40 30 Synthetic fabrics and blends: e.g. shirts, blouses, underwear 40 30 30 Wool Description of programme Consumption* Available options Energy kWh Water litres Time h/min.
124970992_FLE1015W.qxd 8/27/01 9:12 PM Pagina 16 (Nero/Process Black pellicola) Maintenance and Cleaning To aid cleaning, the top part of the additive compartment should be removed. Before any maintenance or cleaning is carried out you must DISCONNECT the appliance from the electricity supply. Descaling The water we use normally contains lime. It is a good idea to periodically use a water softening powder in the machine.
124970992_FLE1015W.qxd 8/27/01 9:12 PM Pagina 17 (Nero/Process Black pellicola) The water inlet filter Cleaning the filter If your water is very hard or contains traces of lime deposit, the water inlet filter may become clogged. It is therefore a good idea to clean it from time to time. Turn off the water tap. Unscrew the water inlet hose. Clean the filter using a hard bristle brush. Tighten up the inlet hose.
124970992_FLE1015W.qxd 8/27/01 9:12 PM Pagina 18 (Nero/Process Black pellicola) Something Not Working Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your local Service Force Centre, please carry out the checks listed below.
124970992_FLE1015W.qxd 8/27/01 9:12 PM Pagina 19 (Nero/Process Black pellicola) Symptom Possible causes The machine vibrates when spinning ● ● ● ● ● The door will not open The internal packing has not been removed. The machine is in contact with the wall or furniture. The machine is not level and stable (check diagonally). The washing load is badly distributed in the drum. Maybe there is very little laundry in the drum. ● The water level is above the bottom edge of the door.
124970992_FLE1015W.
124970992_FLE1015W.
124970992_FLE1015W.qxd 8/27/01 9:12 PM Pagina 22 (Nero/Process Black pellicola) To contact your local Service Force Centre telephone 08705 LONDON & EAST ANGLIA MIDLANDS BIRMINGHAM 66 Birch Road East Wyrley Trading Estate Witton Birmingham B6 7DB BOURNE Pinfold Road Bourne PE10 9HT BRIDGNORTH 68 St.
124970992_FLE1015W.qxd 8/27/01 9:12 PM Pagina 23 (Nero/Process Black pellicola) Installation Instructions It is dangerous to alter the specifications or attempt to modify this product in any way. Care must be taken to ensure that the appliance does not stand on the electrical supply cable. Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.
124970992_FLE1015W.qxd 8/27/01 9:12 PM Pagina 24 (Nero/Process Black pellicola) Unpacking Positioning Install the machine on a flat hard floor. Make sure that air circulation around the machine is not impeded by carpets, rugs etc. Check that the machine does not touch the wall or other kitchen units. Never place cardboard, wood or similar materials under the machine to compensate for any unevenness in the floor.
124970992_FLE1015W.qxd 8/27/01 9:12 PM Pagina 25 (Nero/Process Black pellicola) If you cannot make the cold water connection direct from the rising mains, you may be able to operate the appliance from your cold water storage system. There should be a minimum distance of 5.02m (161/2 ft) between the appliance’s inlet and the bottom of the water storage tank. Set the hose correctly by loosening the ring nut. After positioning the inlet hose, be sure to tighten the ring nut again to prevent leaks.
124970992_FLE1015W.qxd 8/27/01 9:12 PM Pagina 26 (Nero/Process Black pellicola) Levelling In the interest of the environment Level the washing machine by raising or lowering the feet. The feet may be tight to adjust as they incorporate a self locking nut, but the machine MUST be level and stable (check diagonally).
124970992_FLE1015W.qxd 8/27/01 9:12 PM Pagina 27 (Nero/Process Black pellicola) Electrical connection The wire coloured brown must be connected to the terminal marked «L» or coloured red. Upon completion there must be no cut, or stray strands of wire present and the cord clamp must be secure over the outer sheath. Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. WARNING: THIS APPLIANCE MUST BE EARTHED.
124970992_FLE1015W.qxd 8/27/01 9:12 PM Pagina 28 (Nero/Process Black pellicola) From the Electrolux Group. The world’s No. 1 choice. The Electrolux Group is the world's largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more than 150 countries around the world.