WASHING MACHINE FLA 1001 W FLA 1101 W FLA 1201 W AQUACYCLE 1000 FAST COLOUREDS NON FAST COLOUREDS WHITES + PREWASH WHITES HAND RINSES LONG SPIN 124970961 C D A B F G MIXED FABRICS WOOL CARE DELICATES WORN ONCE FRESHEN UP SHORT SPIN DRAIN FLA 1001W H L M J N K P ON-OFF SPIN REDUCTION RINSE HOLD HALF LOAD INSTRUCTION BOOKLET GB
Important Safety Information It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant warnings. These warnings have been provided in the interest of safety.
Contents For the User For the Installer Important Safety Information Your New Washing Machine Description of the Appliance Detergent dispenser drawer The Control Panel Operating sequence Washing Hints 5 5 7-10 7 7 7 7 7 7 8 8 9 9 9 9 9 9 9 10 Installation Instructions Technical Specifications 23 Unpacking Positioning Water inlet Water drainage Levelling Special conditions In the interest of the environment Electrical connection 24 24 24 25 26 26 26 27 11-12 12 12 Which detergent?....
Your New Washing Machine Your new washing machine meets all modern requirements for effective treatment of laundry with low water, energy and detergent consumption. ■ ■ Automatic cooling of the wash water to 60°C before draining, with the 95°C programme. This reduces thermal shock to fabrics, helping to prevent creasing. The special wool programme with its new delicate wash system treats your woollens with extreme care.
Description of the Appliance 1 Detergent dispenser drawer 2 Programme guide 3 “Mains-on” light 4 ON/OFF button 5 “Option” buttons 6 Programme selector dial 7 Door opening handle 8 Filter 9 Adjustable feet 1 3 5 6 AQUACYCLE 1000 FAST COLOUREDS NON FAST COLOUREDS WHITES + PREWASH WHITES HAND RINSES LONG SPIN C D A B F G MIXED FABRICS WOOL CARE DELICATES WORN ONCE FRESHEN UP SHORT SPIN DRAIN FLA 1001W H L M J N K P ON-OFF SPIN REDUCTION RINSE HOLD HALF LOAD 24 7 8 9 Detergent dispenser drawer
The Control Panel AQUACYCLE 1000 FAST COLOUREDS NON FAST COLOUREDS WHITES + PREWASH WHITES HAND RINSES LONG SPIN C D A B F G MIXED FABRICS WOOL CARE DELICATES WORN ONCE FRESHEN UP SHORT SPIN DRAIN FLA 1001W H L M J N K P 1 ON-OFF SPIN REDUCTION RINSE HOLD HALF LOAD Z ANUSSIQ UALITY 2 3 4 5 6 1 Programme guide 7 5 Rinse Hold button Press this button to make the machine stop with water in the drum after the cotton, synthetic or delicate wash cycles.
Operating Sequence 3. Measure out the fabric softener Before the first wash, we recommend that you run a cotton cycle at 60°C, without any laundry in the machine, to remove any manufacturing residue from the drum and tub. Pour 1/2 a measure of detergent into the dispenser drawer and start the machine. If required, pour fabric softener into the compartment marked (the amount used must not exceed the “MAX” mark in the drawer). Close the drawer gently.
6. Start the machine Before starting up the machine check that: ■ the appliance is plugged in ■ the water supply taps are turned on ■ the drain hose is correctly and securely positioned ■ the door and the detergent dispenser drawer are closed. Depress the ON/OFF button: the mains-on light will illuminate and the machine starts operating. ON OFF T0001S 7. At the end of the programme The machine stops automatically.
4. Select the required option WASHING 2 KG OF MIXED FABRICS AT 50°C Suppose you have 2 kg of Mixed fabrics to wash. They are rather delicate fabrics and should not be washed at a high temperature. Depress the RINSE HOLD or SPIN REDUCTION button if required. 1. Load the laundry SPIN REDUCTION Open the door by pulling the door handle outwards. Place the laundry in the drum, one item at a time, shaking them out as much as possible. Close the door. RINSE HOLD HALF LOAD 5.
7. At the end of the programme The machine stops automatically. If you have depressed the RINSE HOLD button, the machine will stop with the water left in the tub, to prevent the fabric from creasing. To drain the water and spin, release the same button. To drain only, select programme “P”. The door is controlled by a safety device which releases 2 minutes after the end of the programme. Switch the machine off by depressing the ON/OFF button again. The mains-on light goes out.
Washing Hints Do NOT overload the machine. Weigh the laundry the first few times you use the appliance.
Which detergent?.... And in which form? To ensure you obtain the best wash results from your appliance, it is important to use the right detergent in your everyday wash, and only detergents recommended for use in automatic machines. To maintain the appearance of your clothes and household textiles and to make them last longer you should use different types of detergent for different washes, whether for whites, colours or delicates.
Wash Care Symbols Wash care labels inside garments recommend how to launder your clothes with the best results. The care labelling code is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correct programme on your washing machine. WASHING SYMBOL WASH ACTION 95 Normal (Maximum) White Cotton or Linen without Special Finishes 60 Normal (Maximum) Cotton, Linen or Viscose without Special Finishes Colourfast at 60°C.
Washing Programmes Programmes for cotton and linen Wash programme/ Washing symbol Degree of soil and type of laundry WHITES + PREWASH For heavy soiled cotton items. WHITES White cotton, for example normally soiled work garments, sheets, household linen, underwear, towels. Fast coloured cotton or FAST COLOUREDS linen fabrics, shirts, underwear, towels. Non fast coloured NON- FAST cotton or linen fabrics, COLOUREDS shirts, blouses, underwear. Programme dial position Description Possible options Max.
Washing Programmes Programmes for synthetics, mixed fabrics, delicates and wool Possible options Max. load Progr. time mins. H Wash at 50 °C 3 rinses Short spin RINSE HOLD SPIN RED. 2 kg 60 Lightly soiled synthetic or mixed fabrics J Wash at 30 °C 3 rinses Short spin RINSE HOLD SPIN RED. 2 kg 35 Separate spin for hand washed delicate items K Draining of water and short spin SPIN RED. 2 kg 5 L Wash at 40 °C 3 rinses Short spin RINSE HOLD SPIN RED.
Maintenance and Cleaning Cleaning the drawer recess Before any maintenance or cleaning is carried out you must DISCONNECT the appliance from the electricity supply. Having removed the drawer, use a small brush to clean the recess, ensuring that all washing powder residue is removed from the upper and lower part of the recess. Replace the drawer and run the rinse programme without any clothes in the drum. Descaling The water we use normally contains lime.
The dangers of freezing Unscrew and remove the filter. Clean carefully under a fast running tap. P0133 If the machine is exposed to temperatures below 0°C, certain precautions should be taken. ■ Turn off the water taps. ■ Unscrew the inlet hoses. ■ Unhook the drain hose from the rear support and position the end of this hose and that of the inlet hoses in a bowl. Run the draining programme. ■ Disconnect the appliance. ■ Screw the inlet hoses and reposition the drain hose.
Something Not Working Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your local Zanussi Service Force Centre, please carry out the checks listed below. IMPORTANT: if you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is under guarantee.
Symptom Possible causes The door will not open ■ ■ ■ The programme is still running. The door lock has not yet released. Water in the tub: the door cannot be opened if water is present in the tub. Spinning starts late or the machine does not spin ■ The electronic unbalance detection device has cut in because the laundry is not evenly distributed in the drum. The laundry is redistributed by reverse rotation of the drum.
Guarantee Conditions Standard guarantee conditions Exclusions We, Zanussi undertake that if, within 12 months of the date of the purchase, this Zanussi appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option, repair or replace the same FREE OF ANY CHARGE for labour, materials or carriage on condition that: ● The appliance has been correctly installed and used only on the electricity supply stated on the rating plate.
Zanussi Service Force To contact your local Zanussi Service Force Centre telephone 08705 CHANNEL ISLANDS GUERNSEY Guernsey Electricity PO Box 4 Vale, Guernsey Channel Islands JERSEY Jersey Electricity Company PO Box 45 Queens Road St Helier Jersey Channel Islands JE4 8NY ORKNEY (M65) Corsie Domestics 7 King Street Kirkwall Orkney KW15 PERTH Hydro Electrical Inveralmond House Ruthervenfield Road Perth PH1 3AQ PERTH Graham Begg Unit 4 Airport Ind Estate Wick KW1 4QS (OWN SALES) SHETLAND SCOTLAND AB
Zanussi Service Force To contact your local Zanussi Service Force Centre telephone 08705 LONDON & EAST ANGLIA MIDLANDS BIRMINGHAM (M18) 66 Birch Road East Wyrley Road Ind. Estate Witton Birmingham B6 6DB BOURNE (M44) Manning Road Ind. Estate Pinfold Road Bourne PE10 9HT BRIDGNORTH (M72) 68 St. Mary’s Street Bridgnorth Shropshire WV16 4DR 11a Gardener Ind. Estate Kent House Lane Beckenham Kent BR3 1QZ CHELMSFORD (M47) Hanbury Road Widford Ind.
Installation Instructions It is dangerous to alter the specifications or attempt to modify this product in any way. Care must be taken to ensure that the appliance does not stand on the electrical supply cable. Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person.
Unpacking Positioning Install the machine on a flat hard floor. Make sure that air circulation around the machine is not impeded by carpets, rugs etc. Check that the machine does not touch the wall or other kitchen units. Never place cardboard, wood or similar materials under the machine to compensate for any unevenness in the floor. Your new washing machine has been designed to be permanently plumbed in to your home’s water supply and drainage system.
If only a cold water supply is available, connect the two hoses to a cold water outlet by means of a «Y» connection piece. Installation should comply with local water authority and building regulations’ requirements. The appliance must be given a separate cold water supply and not be connected to a mixer tap, a single outlet water heater or a booster pump. A minimum water pressure of 0.48 bar is required for safe operation of the appliance.
Levelling In the interest of the environment Level the washing machine by raising or lowering the feet. The feet may be tight to adjust as they incorporate a self locking nut, but the machine MUST be level and stable. Washing machines and dishwashers should be connected to the FOUL drainage system, the water will then be taken to a sewage works for treatment before being discharged safely into a river.
Electrical connection The wire coloured brown must be connected to the terminal marked «L» or coloured red. Upon completion there must be no cut, or stray strands of wire present and the cord clamp must be secure over the outer sheath. Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. WARNING: THIS APPLIANCE MUST BE EARTHED. The manufacturer declines any liability should this safety measure not be observed.
© Electrolux Household Appliances Limited 2000 Z