TVÄTTMASKIN PYYKINPESUKONE ЫЕШКФДЦТФÅ ЬФfiШТФ WASHING MACHINE FL 984 CN A B B C 40º- 95º 30º- 60º 30º- 40º D F G H J K L 30º- 60º 30º- 40º 30º- 40º M N P FL 984CN BRUKSANVISNING KÄYTTÖOHJE КГЛЩМЩВЫЕМЩ ЗЩ ÈЛЫЗДГФЕФСШШ 124974570 INSTALLATION AND INSTRUCTION MANUAL
Your new washing machine Environment protection ■ Materials marked with the symbol are recyclable. To enable them to be recycled, they must be placed in the appropriate collection areas (or containers). Check with your local authorities.
Contents Important information 55 Maintenance Description of the appliance 56 ■ 56 ■ ■ ■ Detergent dispenser drawer ■ Technical specifications 56 Installation 57 ■ ■ ■ ■ ■ Unpacking Positioning Water inlet Water drainage Electrical connection Use ■ ■ ■ ■ ■ 54 Control panel Washing hints Sorting the laundry Temperatures Before loading the laundry Maximum loads Laundry weights Removing stains Detergents and additives Quantity of detergent to be used Washing programmes Operating sequence I
Important information It is important that this instruction book be kept with the appliance for future reference. If you sell or give the appliance away, make sure that the book is passed to the new owners so that they can familiarise themselves with its operation and relevant warnings. The following warnings are provided in the interests of overall safety. You must read them carefully before installing or using the appliance. ■ ■ ■ ■ ■ ■ When unpacking the appliance, check that it is not damaged.
Description of the appliance 1 2 3 4 5 6 7 8 Detergent dispenser drawer Programme chart Option buttons Door opening button Temperature selector dial Operating pilot light Programme selector dial Adjustable feet 2 A B B C 3 4 5 67 H 40º- 95º 30º- 60º 30º- 40º J K L 30º- 60º 30º- 40º 30º- 40º M N P D F G F L 1 8 Detergent dispenser drawer Symbols Prewash Main wash Fabric softener C0006 Technical specifications DIMENSIONS Height Width Depth 85 cm 60 cm 32 cm POWER SUPPLY VOLTAGE/FREQUENCY TOTA
Installation Unpacking All transit bolts and packing must be removed before using the appliance. You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again. 1. Using a spanner, unscrew and remove the rear right-hand bolt and lay the machine on its back, taking care not to squash the hoses. This can be avoided by placing one of the corner packing pieces between the machine and the floor. 2.
Water inlet Connect the water inlet hose to a tap with a 3/4" thread after having inserted the small filter “A” supplied with the machine. The other end of the inlet hose which connects to the machine can be turned in any direction. Simply loosen the fitting, rotate the hose and retighten the fitting, making sure there are no water leaks. The inlet hose must not be lengthened.
Use Control panel B B C 40º- 95º 30º- 60º 30º- 40º H D F G J K L 30º- 60º 30º- 40º 30º- 40º M N P F L 1 2 3 4 5 6 9 8 4 C N 7 1 Spin speed reduction button 4 Door opening button By depressing this button the spin speed is reduced from 900 to 500 rpm in the cotton programmes and from 550 to 400 rpm in the gentle programme. Depress it to open the door. 2 Half-load button Turn this dial to select the washing temperature. Position = cold wash.
i Washing hints Sorting the laundry Follow the wash code symbols on each garment label and the manufacturer’s washing instructions. Sort the laundry as follows: whites, coloureds, synthetics, delicates, woollens. Temperatures for normally soiled white cottons and 95° 60° linen (e.g. tea cloths, towels, tablecloths, sheets...) for normally soiled, colour fast garments (e.g. shirts, night dresses, pyjamas....) in linen, cotton or synthetic fibres and for lightly soiled white cotton (e.g.
Detergents and additives Good washing results also depend on the choice of detergent and use of the correct quantities to avoid waste and protect the environment. Although biodegradable, detergents contain substances which, in large quantities, can upset the delicate balance of nature. The choice of detergent will depend on the type of fabric (delicates, woollens, cottons, etc.), the colour, washing temperature and degree of soiling.
Energetic programmes for cotton and linen Maximum load: 3 kg Progr. Temp.
Gentle programmes for synthetics, mixed fibres, delicates woollens and Maximum load: 1 kg, woollens: 0.7 kg Progr. Temp.
i Operating sequence Before washing your first load of laundry, we recommend that you run a cotton cycle at 60°C, with the machine empty, in order to remove any manufacturing residue from the drum and tub. Pour half a measure of detergent into the main wash compartment and start up the machine. 1. Place the laundry in the drum Open the door by depressing button . Place the laundry in the drum, one item at a time, shaking them out as much as possible. Close the door. P0004 2.
6. Select the programme and start it Turn the programme selector dial clockwise to the required wash programme and pull it outwards: the operating pilot light comes on and the machine starts to operate. B P0215 B P0216 7. At the end of the programme ENGLISH The machine stops automatically, the operating pilot light goes out. It is normal to have to wait for about 2 minutes before being able to open the door to allow the safety lock to release.
i International wash code symbols These symbols appear on fabric labels, in order to help you choose the best way to treat your laundry. ENERGETIC WASH 95 60 40 30 Max. wash temperature 95°C Max. wash temperature 60°C Max. wash temperature 40°C Max.
Maintenance 1. Bodywork Clean the outside of the machine with warm water and a neutral, non-abrasive household detergent. Rinse with clean water and dry with a soft cloth. Important: do not use methylated spirits, solvents or similar products to clean the bodywork. 2. Detergent dispenser drawer After a while, detergents and fabric softeners leave deposits in the drawer. Clean the drawer from time to time by rinsing it under a running tap.
4. The drain pump The machine is equipped with a self-cleaning pump which does not need any maintenance. 5. The dangers of freezing If the machine is exposed to temperatures below 0°C, certain precautions should be taken. ■ Turn off the water tap. ■ Unscrew the inlet hose. ■ Unhook the drain hose from the rear support and position the end of this hose and that of the inlet hose in a bowl. Run the draining programme until the selector dial is in the “Stop” position. ■ Switch the machine off.
Something not working Problems which you can resolve yourself: Problem ■ ■ The machine does not start up: ■ ■ ■ ■ ■ The machine does not fill: ■ ■ ■ ■ ■ ■ ■ ■ Check that the door is firmly closed. Check that the machine is plugged in and that there is power at the socket. Check that the main fuse has not blown. Check that the programme selector dial is positioned correctly and pulled out. Check that the water tap is open. Check that water is coming out of the tap.
■ Problem ■ ■ The machine vibrates or is noisy: ■ ■ ■ ■ ■ ■ The door will not open: ■ ■ ■ ■ ■ Possible cause Check that all the transit bolts and packing have been removed. Check that the machine is not resting against anything. Check that the support feet are resting firmly on the ground. Check that the laundry is evenly distributed in the drum. Maybe there is very little laundry in the drum. The programme is still running.
Made in EEC
