User manual

ENGLISH

If you are unable to identify or solve the problem,

contact our service centre. Before telephoning,

make a note of the model, serial number and

purchase date of your machine: the Service Centre

will require this information.

Mod. ..........

Prod. No. ...........

Ser. No. .........

P0042

Problem Possible cause

• Spinning starts late or the

laundry is not spun enough:

• The electronic unbalance detection device has cut

in because the laundry is not evenly distributed in

the drum. The laundry is redistributed by reverse

rotation of the drum. This may happen several

times before the unbalance disappears and

normal spinning can resume. If, after few minutes,

the laundry is still not evenly distributed in the

drum, the machine will spin at a lower speed or

will not spin. If at the end of the programme the

laundry is not spun enough, redistribute the load

manually and select the spin programme.

• The machine makes an unusual

noise

• The machine is fitted with a type of motor which

makes an unusual noise compared with other

traditional motors. This new motor ensures a

softer start and more even distribution of the

laundry in the drum when spinning, as well as

increased stability of the machine.

• No water is visible in the drum

• Machines based on modern technology operate

very economically using very little water without

affecting performance.

132996790.qxd 10/12/01 12:20 PM Pagina 23 (Nero/Process Black pellicola)