Specifications

- 5 -
The control panel
Pushbuttons
– After selecting the wash programme
and temperature, push this button in to start
the machine. (See also, Indicator light).
– An optional function. When this button
is pressed in, the programme will halt at the
end of the last rinse, and the rinse water will
be retained in the machine. This function is
available for the Synthetics, Delicate and
Wool programmes, to minimise creasing in
synthetic fibres. Once the programme has
halted on rinse-hold, if you wish to end the
wash with both emptying of water and spinning
of the load, press the option button again so
it pops out. If you wish to end the wash by
emptying the water without spinning, you
have to advance the programme control knob
manually, to programme setting L. Before you
advance the programme control knob manually,
we recommend that you first press the On/Off
button to switch the machine off (button pops
out). Once the programme control knob is set
at L, press the On/Off button again (button
remains in) to complete the programme.
Knob controls and detergent dispenser
Temperature control – For setting tempera-
tures between and 90°. Follow care label
recommendations.
Programme control – For setting programme
type. See
Programme Chart.
Detergent dispenser – With separate compart-
ments for detergent and fabric conditioner.
Pre-wash detergent is to be added straight
into the drum.
Indicator light – Comes on approx. 5 seconds
after the ON/OFF button is pressed, when the
door is locked electrically and the machine
starts. The light goes out approx. 2-3 minutes
after the end of the programme and the door
is unlocked.
Space for program chart (Self-adhesive label)
1
2
3
4
5
6
7
5 1 2 3 4
6
7
Downloaded From WashingMachine-Manual.com Manuals