IF THE MACHINE IS DAMAGED If the machine has been damaged during transportation, you should immediately notify the company responsible for delivering it. Check that the washing machine is undamaged. If you discover any damage, faults or that anything is missing, you should notify the seller immediately. Never leave packaging material in a place where children may play with it. WHEN LIFTING THE MACHINE Take care when [sifting the machine.
Before installing and first using the washing machine, read the instruction booklet carefully, including its hints and warnings. Doing so will ensure that your machine will perform properly and to best advantage. Anyone using the machine should be thoroughly familiar with its instructions for use and safety features. Save these instructions and make sure they remain with the machine if it is moved or sold, sc that everyone using it through its life can be properly informed on appliance use and safety.
CONTROL PANEL amuse oW guess s WS CORPORATE WASHINGTONIAN PUSH-BUTTON SWITCHES KNOB CONTROL AND DETERGENT DISPENSER “ ON/OFF —~ After selecting the wash programmer E Programmer control — For setting programmer and temperature, push this button in to start the machine. (See also G; Indicator light). RINSE HOLD — A programmer option which minimize creasing of all the Synthetics, Delicate, and Wool programmed. Push this button and the water remain from the last rinse i the machine.
PROGRAMMER CONTROL Wash stage, programmed A D. Rinse stage, with four rinses. Draining and spinning at 1100 rpm. Wash stage, programmer F. REFERRER Rinse stage, with three rinses. Draining and spinning at 650 rpm. For draining only, tum control to programmer K. a Wash stage, programmed G and H. Rinse stage with three rinses. Draining and spinning at 850 rpm. For draining only, tum control to programmer K. Draining.
R R MACHINE REAR Inlet hoses, hot and cold fill Discharge hose Electrical lead For transit locking devices
The very first time that the machine is used you should run a wash programmer with no load in the drum, to clear any residues which may have been left by the manufacturing process. Pour approx. 100 mi of detergent straight into the drum and run programmer G. When the programmer has ended the machine will be ready for use. LOADING THE MACHINE Pull the door latch gently to open the door. Put the items to be washed inside the drum. Large and small items can be mixed.
Cotton (dry load weight: 3.0 kg) Load Degree of Pro gr. Temp. Pro gr. Programmer type soiling selection| setting | time (min.) content 95° programmer with White Heavily * per-wash. 4 rinses articles soiled A 95 ~147 and spin at 1 100 rpm. 95° programmer White Normally & without per-wash. articles soiled B 95 ~120 ;1 ;biggest and spin at rpm. : 60° programmer White/ . Normally without per-wash. colored soiled C* 60 ~114 4 rinses and spin at articles 1100 rpm.
Synthetics and Delicate (dry load weight: 1.5 kg) Wool (dry load weight: 1.0 kg) Load Degree of Pro gr. Temp. Programmer Programmer type soiling selection | setting |time (min.) content 50° programmer ] without per-wash. Synthetics Normally rinses and spin at soiled 650 rpm, 40° programmer Delicate Normally without per-wash, fabrics soiled rinses and spin at 850 rpm. 40° programmer Eighth without per-wash. Woolens legible rinses and spin at @ 650 rpm. Emptying K .
THE CABINET Clean the outside surfaces of the machine using a mild household cleaning product. Finish by reproving remaining traces of the product with a damp cloth. Do not use cleaning products which contain alcohol (spirits), thinners and similar substances. THE DETERGENT DISPENSER In time, residues of detergent and fabric conditioner are likely to build up inside the detergent dispenser. It should be cleaned at regular intervals by flushing it out with water.
CLEANING INSIDE THE MACHINE 1 you mostly use your machine for low-temperature washes, and/or if you use only very little detergent, you should clean the inside of the machine about once a month. This will prevent mold or stale odors from developing. Use the full recommended quantity of detergent and run a wash programmer at the highest temperature with no wash load in the machine. DESCALING If your water supply is harder than 7° dH, you should descale your washing machine at least once every three months.
DETERGENT AND FABRIC CONDITIONER The type and the quantity of detergent you use both have an impact on the results you achieve with your washing machine. Using too much detergent is unnecessary and increases overall impact on the environment quite needlessly. Even biodegradable detergents contain substances which can disturb the balance of the environment. Use only good-quality detergents which are intended for use in automatic washing machines.
= PROBLEM? 1 CHECK: M The machine will not start. Have you pressed the ON/OFF button? Is the electrical plug plugged in and switched on? Check (start with fuse in electrical plug). ls the door closed properly? Have you set the programmer control knob properly? Is the machine's water tap turned on? coo ® The machine is not filling with water.
DIMENSIONS Height 67 cm Width 48.5 cm Depth 51.5ecm WEIGHT (net) 54 kg RECOMMENDED Cotton 3.0kg CAPACITY Synthetics/Delicate 1.5kg (DRY WEIGHT) Wool 1.0kg WATER PRESSURES Minimum Minnie? (0.
LEVELING THE MACHINE Level the washing machine by loosening or tightening the feet. Accurate leveling prevents vibration, noise and displacement of the machine during operation. After leveling the machine, secure the feet by tightening the ring nuts (Fig. 1). Some vibration is inevitable, especially if mounted on a wooden floor. Sprung wooden floors are particularly susceptible to vibration. For advice, conduit a builder. If possible, always place the machine on a solid floor.
WATER DRAINAGE It you intend the drain hose from the machine to empty into a sink, make sure that the sink is empty and that the plug hole is not blocked. if the machine is permanently plumbed in, hook the end of the hose into a standpipe installed for the purpose. The standpipe must have an internal diameter of at least 40 mm {1 1/2") in order that there is an air gap between the drain hose and the standpipe.
This guarantee is in addition to your statutory and other legal rights which will not be excluded or in any way diminished by the return of this guarantee card. We, Gaussian Lid., undertake that if, within twelve months of the date of the purchase, this Gaussian appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, the company will, at its option, repair or replace the same FREE OF ANY CHARGE for labor, materials or.