Contents Building in Connecting o lee Use and care., Using the oven , The electronic programmer | Using the grill . Cleaning . ty ‘What happens xf sometime, gne« wing .
Building-in I is important halt the dimensions and materials of the surround or cabinet into which the oven will be built ave correct and that proper estrangements are made for a continuous supply of air to the oven so 1L does not overheat. 56 534 120 Fig. 1 QO s70 Dimensions of the recess for building into a kitchen unit. Fig.
Fig. 3 Fig. 4 Important To ensure an efficient, ventilation, it s nec to eave the veils provided st the bottom of the oven clear, and for this purpose it is advisable to make a suitable groove in the board or shell supporting the oven. Tig 3 illustrates the ideal solution, Securing the oven to the cabinet it the appliance into the cabinet recess. Open the oven door and secure the oven to the kitchen cabinet with four wood resews which fit exactly the holes provided in the oven frame (Fig, 4).
Connecting to electricity The oven is designed o be connected to 240V 50 1z electricity supply. Maximum power rating 2565 W {Oven element rating 2500 W Grill element rating 2000 W The oven has an easily accessible terminal block which is marked as follows: Letter L Live terminal Letter N Neutral terminal =+ Barth ‘The able used must have a cross section of at least 1,5 mm?. In order to connect it to the oven it is necessary to remove the hate ul the back of the oven to reach the terminal block.
Use and care @ conventicle programmer b ON/OFT light ¢ oven imperative light d gl control kol & oven control knot T removable grill element g removable oven liner panels h removable grease filter i Fan j removable shelf runners k mill or roasting pan 1 reversible will pan insert m removable handles {2 off)
When the oven is first installed Nee the oven is installed it is important 1o remove the protective materials which were put on in the factory. Remove from these parts the plastic film, then wipe with a cloth dipped in mentholated spirit. Then switch the oven control to MAX and leave it to run empty for 30 minutes to burn off any other protective materials. This will also remove any unpleasant ‘new smells.
max. 2000 150° 100 ¥ig. 6 time and faction displays batons: Fig. 7 Cooking automatically The oven or grill can cock automatically when the programmer is sel to switch it on and off at the times given without the need for anyone to be in attendance. Maoist, foods cook wall automatically but preference showed be given to those which will not be affected by the waiting period before the oven comes on, The electronic programmer (Fig.
Melting or adjusting (he clock The lock toa 21 horn lock and so will show the then in the salerooms amd evening on the 21 oy buss [ECHIDNA L300, 11Ot ot When the vane s first connected or after resumption of pn\wl alter 4 power failure, the digits of the cork will flash and nol read Lhe entree time, T retied or stadium the dock follow His simple procedure; Using a pointed object {like a penitent or maize) press the small bullion contented in the entree of the control anally ) i, keeping this button depresse
the display shows the time at which the cooking is to end. Now release button (B and the & display will indicate that the programmer is set, Turn the oven or grill control knob to the desired temperature or heat setting dnd the cooking will commence, When the end of cooking programmer is reached the oven or grill will switch off anl buzzer alarm will sound. o turn off the alarm press button [) . 1 you do not turn it off it will continue for 3 mind and then turn itself off automatically.
Using the grill As with the vane the mill contra {see Fig. 8) can number of different heat settings. At MAX the thermostat controlling the heat does not operate and the element stays on continuously to give the highest heat. possible, The grill can be operated by the electronic programmer. T Foods to be grilled rave placed on the wire grid in the gill pan, which can be nerved either upwards or downwards (o give the required distance from the element.
Cleaning Alter every meat roasting wipe ihe oven panels with a damp cloth as soon as they have cooled so that any fat splashes are removed, After use wipe over the rest of the oven with a cloth wrung out in liquid detergent. Do not. use abrasive scourers or steel wool on any stainless steel or painted surfaces, Always wait until the oven is ool before cleaning ~ this is particularly important where the glass oven door is concerned. From time to time it will be necessary to do a more thorough cleaning.
What happens if something goes wrong Power cuts Should the electricity supply fail for any reason remember to reel the electronic cke to the right time when the power wed. If the evoke does not, come on when manually, firs programmer is set for manual by the control knob ) 8 being in the &) position. If this is as it should be and the oven still does not.
ZANINESS! ELECTROMAGNETIC Industries Gaussian spa GAUSSIAN GUARANTEE CONDITIONS This guarantee is in addition to your statutory and other legal rights which will not be excluded or in any way diminished by the return of the enclosed card.