User manual

ManualsBrandsZanussi ManualsHousehold AppliancesF 1225

Place a container close to

the pump (A) to collect

any spillage.

Pull out the emergency

emptying hose (B), place it

in the container and re-

move its cap.

When no more water comes out, unscrew the pump

cover by turning it anti-clockwise and remove the filter.

Use pliers, if necessary. Always keep a rag nearby to

dry up any water spillage when removing the cover.

Clean the filter under a tap, to remove any traces of fluff.

Remove foreign bodies

and fluff from the filter seat

and from the pump impel-

ler.

Check carefully whether

the pump impeller rotates

(it rotates jerkily). If it

doesn’t rotate, please con-

tact your Service Centre.

Put the cap back on the

emergency emptying hose

and place the latter back in

its seat.

Replace the filter into the

pump by inserting it cor-

rectly into the special

guides. Screw the pump

cover firmly by turning it

clockwise.

Caution! When the appliance is in use and

depending on the programme selected there can be

hot water in the pump.

Never remove the pump cover during a wash cycle, always

wait until the appliance has finished the cycle, and is

empty. When refitting the pump cover, ensure it is

securely re-tightened so as to stop leaks and young

children being able to remove it.

Cleaning the water inlet filters

Important! If the appliance doesn't fill, takes long to fill

with water, the starting button blinks yellow or the display

(if available) shows the relevant alarm (see chapter "What

to do if..." for more details), check if the water inlet filters

are blocked .

To clean the water inlet filters:

• Turn off the water tap.

• Unscrew the hose from

the tap.

• Clean the filter in the

hose with a stiff brush.

• Screw the hose back onto the tap. Make sure the

connection is tight.

• Unscrew the hose from the machine. Keep a rag

nearby because some water may flow.

• Clean the filter in the valve with a stiff brush or with

the piece of cloth.

35°

45°

• Screw the hose back to the machine and make sure

the connection is tight.

• Turn on the water tap.

Downloaded From WashingMachine-Manual.com Manuals