DISHWASHER GESCHIRRSPÜLER DWS 6947 152978 88/0 INSTRUCTION BOOKLET BEDIENUNGSANLEITUNG GB D
Contents For the user For the installer Important safety information 3 Description of the appliance 4 The control panel 4 Before use Setting the water softener Rinse aid 6 6 8 Using your appliance Loading your appliance Adjusting the height of the upper basket Use of detergent 9 9 11 12 Hints and tips 13 Washing programmes 14 Operating sequence 15 Maintenance and cleaning Internal cleaning Cleaning the filters External cleaning Prolonged periods of non-operation Frost precautions Moving th
Important safety information It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information. This information has been provided in the interest of your safety.
Description of the appliance 1. Levelling spacers 2. Upper basket stop 3. Salt container 4. Large filter 5. Detergent dispenser 6. Control panel 7. Rating plate 3 8. Rinse aid dispenser 4 9. Central filter 14 1 13 12 2 11 10. Lower spray arm 10 9 5 8 11. Upper spray arm 12. "WRD" detergent dispenser 7 13. Upper basket 6 14. Worktop IN78 The control panel 9 BIO 1 1. 2 3 On/Off indicator light 2. On/Off push button 3. Door handle 4.
6. 7. "Delay start" push button Audible signals Allows the start of the programme to be delayed by 3, 6, or 9 hours. This option is not available with the "Rinse and Hold" programme. Audible signals have been introduced to help indicate which operations the dishwasher is performing. Programme start push button Short "instruction accepted" signal When any of the push buttons are pressed, a short audible signal informs you that the machine has accepted the instruction given.
Before use Before using your dishwasher for the first time: 1. Ensure that the electrical and water connections comply with the installation instructions 2. Remove all packaging from inside the appliance 3. Set the water softener 4. Pour 1 litre of water inside the salt container and then fill with salt 5. Fill the rinse aid dispenser. 6. Run a "Rinse and Hold" programme.
Filling with salt Only use salt specifically designed for use in dishwashers. All other types of salt not specifically designed for use in a dishwasher, especially table salt, will damage the water softener. Only fill with salt just before starting one of the complete washing programmes. This will prevent any grains of salt or salty water, which may have been spilled, remaining on the bottom of the machine for any period of time, which may cause corrosion. To fill: 1.
Rinse aid Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying. The dispenser, which is positioned inside the door, holds about 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setting. Filling with rinse aid 1. Open the container by turning the lid (A) anticlockwise. A 2. Add the rinse aid until the container is completely full. The indicator (B) will be completely dark. BR01 3.
Using your appliance Loading your appliance Before placing dishes in the machine, remove any scraps of food, to avoid clogging the filters and consequently reducing the performance. Do not load very small items which can fall through the baskets. Open the door and slide out the baskets to load the dishes. UI48 The lower basket The lower basket is designed to take saucepans, lids, plates, salad bowls, cutlery etc.
The cutlery basket Long bladed knives stored in an upright position are a potential hazard. These items should only be placed in the removable knife basket. Take care when loading or unloading sharp items such as knives. Removable knife basket Long and/or sharp items of cutlery such as carving knives must be placed horizontally in the removable knife basket, which is positioned at the rear of the upper basket. UI53 Cutlery should be placed in the removable cutlery basket with the handles facing downwards.
The upper basket The upper basket is designed for plates (dessert plates, saucers, dinner plates of up to 24 cm in diameter), salad bowls, cups and glasses. If dishese are loaded in the upper basket, tilt them forwards. Arrange items on and underneath the fold-down cup racks so that water can reach all surfaces. Light items (plastic bowls etc.) should be loaded in the upper basket and arranged so they do not move. US29 Before closing the door, ensure that the spray arms can rotate freely.
Use of detergent Only use detergents specifically designed for use in dishwashers. Min = 15 g Max = 30 g D If using powder detergents proceed as follows: 1. Open the dispenser lid by pulling the catch (D). 2. Add the detergent according to the recommended quantity given in the "Washing programmes" chart. As all detergents are not the same, you should also consult the instructions given on the packet. M M IN AX 3. Always close the lid. DE17 4.
Hints and tips To save energy Items not suitable for dishwashers Place dishes in the machine immediately after every meal and wait until the dishwasher is full before washing. If necessary run the Rinse and Hold programme (see "Washing Programmes" chart) so that any food scraps do not become caked on the dishes while you are waiting to run the complete wash programme. Do not prewash dishes under running water.
Washing programmes Programme Degree of soil and type of load Rinse and Hold Any. Partial load (to be completed later in the day). Intensive 70° WRD Heavy soil. Crockery, cutlery, pots and pans Required push button Normal soil. Crockery and cutlery 65° Normal 65° no prewash Light soil. Crockery and cutlery 65° with prewash BIO 50° no prewash ** Quick 50° Normal soil. Crockery and cutlery 50° Light soil. Crockery and cutlery 50° Light soil.
Operating sequence 1. 8a. Setting and starting the programme without "delay start" Check the filters Ensure they are clean and properly positioned (see "Maintenance and cleaning"). 2. Press the push button corresponding to the required programme, all the phase indicator lights foreseen with that programme will illuminate. Press the On/Off push button The On/Off indicator light will illuminate. Also the indicator light of the last selected programme and eventual options will illuminate. 3.
8b. Setting and starting the programme with "delay start" 10. At the end of the washing programme Once a programme and required options have been selected (see point 8a.) to use "delay start" proceed as follows: Press the "delay start" push button. The indicator light corresponding to the selected hours (3,6, or 9) will illuminate. The delay start will not modify the settings made previously . To set the time setting to zero press the "delay start" push button the indicator lights of the hours are off.
Maintenance and cleaning Internal cleaning Ensure that the seals around the door, the detergent and rinse aid dispensers are cleaned regularly with a damp cloth. We recommend every 3 months to run a 65°C wash programme without dishes using detergent. Cleaning the central filter (After each wash) Scraps of food may accumulate in the drain filter (A) and should be removed by rinsing the filter under running water. To remove the drain filter - simply pull it out by the handle.
Check that the WRD is not clogged with detergent residue. If necessary rinse it under running water after having removed it from the basket by twisting it anticlockwise and pulling it upwards. Fasten it back onto the support by turning it clockwise. Never use your dishwasher without the WRD dispenser. Since WRD also ensures correct distribution of the water to the upper spray arm, running the dishwasher without it will impair the washing results.
Something not working Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. The dishwasher is fitted with a number of alarm systems which can help you to quickly determine the cause of any problems. The dishwasher will not start or stops during operation, all push buttons are inoperative except for the On/Off push button and all the indicator lights are off.
If after all these checks, the problem persists, contact your local Service Force Centre, quoting the model and serial number. This information can be found on the rating plate located on the right hand side of the dishwasher door (see picture). Service and spare parts Prod.No. ........ Ser. No. ......... RA01 This product should be serviced by an authorised Service engineer, and only genuine spare parts should be used. Under no circumstances should you attempt to repair the machine yourself.
Hints for test centres Before starting any test it is necessary to fill completely with salt the salt container and with rinse aid the rinse aid dispenser.
Installation instructions Remove all packaging before positioning the machine. If possible, position the machine next to a water tap and a drain. Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. Water supply connections Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person. This dishwasher may be fed with either hot (max. 60°) or cold water.
Water outlet hose connection 2 3 Ø Ø 1. To the sink outlet spigot, securing it if necessary with a clip. 18 21 1 min 4 cm The end of the drain hose can be connected in the following ways: 3. To a stand pipe provided with vent-hole, minimum internal diameter 4 cm. min 30 cm max 100 cm max 100 cm 2. Hooked over the edge of the sink using the special curved plastic guide provided. CS09 Ensure the hose is not bent or squashed as this could prevent or slow down the discharge of water.
Adjusting the worktop You can move the worktop forward or backward by 25 mm in order to align the machine with other kitchen units. Simply unscrew the two rear retaining screws, move the top to the required position and then retighten the screws. IN26 Fitting under a counter (kitchen worktop or sink) By removing the machine’s worktop, you can install it under a close fitting sink unit or a pre-existing top, providing the dimensions of the recess correspond to those shown in the picture.
From the Electrolux Group. The world’s No.1 choice. The Electrolux Group is the world’s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. 14 billion USD in more than 150 countries around the world.