Service manual

SOI/DT 2007-02 dmm 17/56 599 38 60-23
4.2.5 Buttons and LCD
The functions of each button are defined by the configuration of the appliance.
• Button no. 1: TEMPERATURE
The temperature set by the programme is the base one,
pressing the button it is possible to modify it from a
max. to a minimum depending on the programme.
Simultaneously the thermometer symbol is modified.
• Button no. 2: SPIN
The spin set by the programme is the maximum one,
pressing the button it is possible to vary the speed up to
zero, then it passes to NIGHT CYCLE and RINSE
HOLD (with relative lighted symbols).
• Button no. 3: OPTIONS
Configurable button. The options available for this button
are:
− Pre-wash (it can be configured also as programme)
− Easy-iron (it can be configured also as programme)
− Intensive
• Button no. 4: OPTIONS
Configurable button. The options available for this
button are:
− Super rinse
− Quick
• Button no. 5: DELAYED START/ SUPER RINSE
Configurable button. It can perform the function of:
- Delayed start
- Super rinse
• Button no. 6: START/PAUSE
This button is configurable and has the function of
START/PAUSE (inside there are two LEDs, one red that
flashes in case of alarm and one green that flashes when
the appliance is in pause mode or in combination with the
red one to indicate the alarm code).