GESCHIRRSPÜLER DISHWASHER DE 6865 D Bedienungsanleitung GB Instruction book
Contents Important safety information 19 Description of the appliance 19 The control panel 20 Before use Setting the water softener Rinse aid Use of detergent 21 21 22 23 Using your appliance Loading your appliance Adjusting the height of the upper basket 24 24 25 Hints and tips 25 Washing programmes 26 Operating sequence 27 Maintenance and cleaning Internal cleaning Cleaning the filters External cleaning Prolonged periods of non-operation Frost precautions Moving the machine 29 29 29 29 29
Important safety information It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information. This information has been provided in the interest of your safety.
The control panel 1. On/Off indicator light 8. Programme phase indicator lights Each phase is indicated with a symbol: 2. On/Off push button Prewash/Rinse and Hold Wash 3. Programme selection push buttons Rinse Drying 4. Door handle As soon as you select a washing programme, all the phases of the chosen programme will illuminate. As the programme progresses, only the phase under way will illuminate. At the end of the programme the phase indicator lights turn off. 5. Digital display 6.
To deactivate these audible signals, press the "Delay start" push button for about 3 seconds, at the end of which an intermittent audible signal informs you that the audible signals have been deactivated. Audible signals Audible signals have been introduced to help indicate which operations the dishwasher is performing.
To select a different level be sure that the dishwasher is off and then proceed as follows: Rinse aid Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying. The dispenser, which is positioned inside the door, holds about 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setting. 1. Press the "On/Off" push button. 2.
Use of detergent Only use detergents specifically designed for use in dishwashers. If using powder detergents proceed as follows: 1. Open the dispenser lid by pulling the catch (D). 2. Add the detergent according to the recommended quantity given in the "Washing programmes" chart. As all detergents are not the same, you should also consult the instructions given on the packet. 3. Always close the lid. 4.
Using your appliance Cutlery should be placed in the removable cutlery basket with the handles facing downwards. If the handles protrude from the bottom of the basket, obstructing the lower spray arm, load the cutlery with the handles facing upwards. Ensure that cutlery is positioned in the compartments and that soiled surfaces do not touch each other. Mix spoons with other cutlery to prevent them from sticking together. Silver cutlery tends to go black if mixed with steel cutlery.
To lower the basket to the original position proceed as follows: Adjusting the height of the upper basket If washing very large plates (over 27 cm and up to 32 cm in diameter) you can load them in the lower basket after moving the upper basket to the higher position. 1. Pull out the basket until it stops. 2. Carefully lift both sides upwards and the allow the mechanism to drop back slowly, keeping hold of it. Attention! Never lift or lower the basket on one side only.
Washing programmes Programme Degree of soil and type of load Required push buttons Heavy soil. Crockery, cutlery, pots and pans On/Off + 70° 80I Normal soil. Crockery and cutlery On/Off + 65° 25 g 5g Cold prewash Main wash up to 65°C 2 cold rinses 1 hot rinse Turbo drying Fresh soil. Crockery and cutlery On/Off + 60° A 30I 20 g / Main wash up to 60°C 1 hot rinse *** Eco 50° Normal soil.
Operating sequence 1. Check the filters 7a. Setting and starting the programme without "delay start" Ensure they are clean and properly positioned (see "Maintenance and cleaning"). Press the push button corresponding to the required programme, all the phase indicator lights for that programme illuminate. In the digital display appears the time duration of the programme (in minutes). 2. Press the On/Off push button The On/Off indicator light will illuminate.
8. At the end of the washing programme The dishwasher will automatically stop and an intermittent audible signal informs you that the programme has ended. In the digital diplay will appear three zeros (000) and all the indicator lights of the phases and of the programme will turn off. The On/Off indicator light remains on until the On/Off push button is depressed. Wait a few minutes before opening the dishwasher’s door; in this way the dishes will be cooler and you will avoid burning yourself.
Maintenance and cleaning The dishwasher must not be used without filters. Incorrect repositioning and fitting of the filters will produce poor washing results. Cleaning the filters is vital to ensure correct operation of the machine. Internal cleaning Ensure that the seals around the door, the detergent and rinse aid dispensers are cleaned regularly with a damp cloth. We recommend every 3 months to run a 65°C wash programme without dishes using detergent.
Something not working Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. The dishwasher is fitted with a number of alarm systems which can help you to quickly determine the cause of any problems.
If after all these checks, the problem persists, contact your local Service Force Centre, quoting the model and serial number. This information can be found on the rating plate located on the right hand side of the dishwasher door (see picture). Protection against flooding In order to prevent water floods, the machine has been provided with two additional devices, having the following characteristics: 1. In the water inlet hose (see "Water supply connections").
Installation instructions Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person. Remove all packaging before positioning the machine. Water outlet hose connection The end of the drain hose can be connected in the following ways: 1. To the sink outlet spigot, securing it if necessary with a clip. 2.
Electrical connection Before plugging the appliance into the wall socket, make sure that: 1. The mains voltage corresponds to the voltage given in the "Technical specifications". 2. The meter, fuses, mains power supply and wall socket can all take the maximum load required. Make sure that the socket and plug are compatible without having to use any type of adaptor. If necessary, have the domestic wiring system socket replaced. Safety standards require the appliance to be earthed.
From the Electrolux Group. The world’s No.1 choice. The Electrolux Group is the world’s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. 14 billion USD in more than 150 countries around the world.