User manual

The cutlery basket
Long bladed knives stored in an upright position are a
potential hazard.
Long and/or sharp items of cutlery such as carving knives
must be positioned horizontally in the upper basket.
Take care when loading or unloading sharp items such as
knives.
Removable knife basket
Long and/or sharp items of cutlery such as carving knives must
be placed horizontally in the removable knife basket, which is
positioned at the rear of the upper basket.
Cutlery should be placed in the removable cutlery basket with
the handles facing downwards. If the handles protrude from
the bottom of the basket, obstructing the lower spray arm, load
the cutlery with the handles facing upwards.
Mix spoons with other cutlery
to prevent them from sticking
together.
For best results we
recommend you to use the
cutlery grids provided (if the
size and dimensions of the
cutlery allow it).
The cutlery basket is in two
parts which can be separated
to give greater loading
flexibility. To separate the two
parts, slide them horizontally
in opposite directions and
pull them apart. To
reassemble, reverse the
procedure.
The upper basket
The upper basket is designed for plates (dessert plates,
saucers, dinner plates of up to 25 cm in diameter), salad
bowls, cups and glasses.
Arrange items on and underneath the cup racks so that water
can reach all surfaces.
Glasses with long stems can
be placed upside down in the
cup racks.
For taller items, the cup
racks can be folded upwards.
Light items (plastic bowls
etc.) must be loaded in the
upper basket and arranged
so they do not move.
In case that plates are loaded in the upper
basket:
load them starting from the
rear positions of the
basket; tilting them slightly
forwards and avoiding the
front positions near the
door.
Before closing the door, ensure that the spray arms can
rotate freely.
Adjusting the height of the upper basket
If washing very large plates you can load them in the lower
basket after moving the upper basket to the higher position.
To move to the higher position proceed as
follows:
1. Move the front runner stops (A) of the upper basket
outwards and slide the basket out.
2. Refit the basket in the higher position and replace the stops
(A) in their original position.
After loading your machine always close the door, as an
open door can be a hazard.
26
UI53
UI63
UI62
US47
US71
With upper basket raised 20 cm 31 cm
With upper basket lowered 25 cm 27 cm
Maximum height of the dishes in
upper basket lower basket
RC01