User manual

- 9 -
Service and spare parts
Before calling service, use the trouble shooting table
«If the machine is not working» to try to attend to the
fault yourself. If service is called in to solve a problem
that is in this list, there is a risk that you will be respon-
sible for the cost. This is also true if you have used the
appliance for a purpose other than it is intended for.
Note that electrical faults should always be rectified by
a certified electrician.
Service and spare parts can be ordered from your dealer.
Before calling the dealer or a service centre, make a note
of the details on the data plate affixed to the rear of the
dishwasher. Make a note of the following:
TYPE ............................................................
MOD ............................................................
PROD.NO ............................................................
SER.NO ............................................................
Purchase date............................................................
Technical specifications
DIMENSIONS Height 460 mm
Width 450 mm
Depth 480 mm
WEIGHT (net) 17 kg
(gross) 20 kg
CAPACITY 5 (standard IEC place settings)
WATER PRESSURES Minimum 50 kPa (0.5 bar)
Maximum 1000 kPa (10 bar)
ELECTRICAL DATA Power supply 220/230 V - 50 Hz
Fuse 10 A
Heating element 1200 W
Power rating 1280 W
Service