User manual

- 8 -
If the machine is not working
The machine will not start.
The machine is not filling with water.
The machine will not drain.
Dishes not washed satisfactorily.
Visible lime deposits or white film on
the dishes.
The machine is noisy.
The dishes are not quite dry.
■ Have you pressed the ON/OFF button?
■ Is there power to the machine?
■ Has the fuse blown?
■ Is the door closed properly?
■ Have you set the programme knob properly?
■ Is the water tap turned on?
■ Is the water tap turned on?
■ Has your domestic water supply been cut off temporarily?
■ Is the water intake hose kinked or blocked?
■ Is the filter inside the intake hose blocked?
■ Is the water pressure too low?
■ Did you open the door before the light went out and the
cycle ended?
■ Is the discharge hose kinked or blocked?
■ Are the filters clogged?
■ Are the baskets too full?
■ Have the dishes not been arranged properly?
■ Does the spray arm rotate?
■ Are the spray arm holes clogged?
■ Are the filters clogged?
■ Are the filters in position?
■ Not enough detergent has been used or is it unsuitable?
■ Is the detergent old or has gone hard?
■ Has the rinse aid run out or is too little being used?
■ Are the dishes rattling against each other?
■ Is the spray arm knocking against the dishes?
■ Have the dishes been left too long inside the machine?
Symptom Check
The door is difficult to close.
■ Is the dishwasher level?
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out
an engineer. Before contacting Service, please carry out the checks listed below.
Never attempt to repair the dishwasher yourself.
Repairs carried out by unauthorised or inexperienced
persons can cause injury or serious malfunctioning.