DISHWASHER DA 4131 152968 33/1 Instruction Book UK
Description of the appliance 1. Water hardness adjustment 2. Upper basket stop 3. Salt container 4. Detergent dispenser 5. Rinse aid dispenser 6. Control panel 7. Filters 8. Lower spray arm 9. Upper spray arm 10. Upper basket 11. Levelling spacers 12.
Using your appliance Loading your appliance The upper basket Before placing dishes in the machine, remove any scraps of food, to avoid clogging the filters and consequently reducing the performance. Do not load very small items which can fall through the baskets. The upper basket is designed for plates (dessert plates, saucers, dinner plates of up to 24 cm in diameter), salad bowls, cups and glasses. Arrange items on and underneath the cup racks so that water can reach all surfaces.
Washing programmes Programme (1) INTENSIVE 65°C NORMAL 65°C Degree of soil and type of load Heavy soil Crockery, cutlery, pots and pans Normal soil Crockery and cutlery Any. RINSE & HOLD Partial load (to be completed later in the day).
Fitting under a counter Levelling (kitchen worktop or sink) Good levelling is essential for correct closure and sealing of the door. When the appliance is correctly levelled, the door will not catch on the levelling spacers on either side of the cabinet. If the door does not close correctly, loosen or tighten the adjustable feet until the machine is perfectly level.
Service and Spare Parts In the event of your appliance requiring service, or if you wish to purchase spare parts please contact your local Service Force Centre by telephoning: 08705 929929 Your telephone call will be automatically routed to the Service Force Centre covering your post code area. For the address of your local Service Force Centre and further information about Service Force, please visit the website at www.serviceforce.co.
Guarantee Conditions They will then ensure that the local Service Organisation is aware of your move and able to look after you and your appliance.
From the Electrolux Group. The world’s No.1 choice. The Electrolux Group is the world’s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. 14 billion USD in more than 150 countries around the world.
Instruction Book DISHWASHER - Before use - Maintenance - Installation Contents Before use Setting the water softener Filling with salt Filling with rinse aid and adjusting the dose Use of detergent 2 2 2 3 3 External cleaning Prolonged periods of non-operation Frost precautions Moving the machine 5 5 5 5 Something not working 6 Hints and tips 4 Maintenance and cleaning Internal cleaning Cleaning the filters 5 5 5 Installation Water supply connections Water outlet connection Electrical connection
Before use Adjustment on the machine Before using your dishwasher for the first time: A 1. Ensure that the electrical and water connections comply with the installation instructions 2. Remove all packaging from inside the appliance 3. Set the water softener 4. Pour 1 litre of water inside the salt container and then fill with salt 5. Fill the rinse aid dispenser. A 1 2 AA04 Setting the water softener Attention! Only use salt specifically designed for use in dishwashers.
Rinse aid Use of detergent Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying. The dispenser, which is positioned inside the door, holds about 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setting. Only use detergents specifically designed for use in dishwashers. We recommend the use of Finish detergents which are available in the following options: Finish Double Action Tablets.
Hints and tips To save energy Place dishes in the machine immediately after every meal and wait until the dishwasher is full before washing. If necessary run the Rinse and Hold programme (see "Washing Programmes" chart) so that any food scraps do not become caked on the dishes while you are waiting to run the complete wash programme. Do not prewash dishes under running water. For best washing and drying results Before loading, remove all scraps of food and soak very heavily soiled pots and pans.
Maintenance and cleaning Internal cleaning External cleaning Ensure that the seals around the door, the detergent and rinse aid dispensers are cleaned regularly with a damp cloth. We recommend the use of Finish Dishwasher Cleaner every 3 months or run a 65°C wash without dishes using detergent. Regular use of Finish Dishwasher Cleaner cleans inaccessible parts, eliminates unpleasant food odours and helps prevent the build-up of limescale.
Something not working Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your local Service Force Centre, please carry out the checks listed below. Important: If you call out an engineer to a fault listed below or to repair a fault caused by incorrect use or installation a charge will be made even if the appliance is in guarantee.
Installation Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person. Remove all packaging before positioning the machine. If possible, position the machine next to a water tap and a drain. + 2 m max Good levelling is essential for correct closure and sealing of the door.
This appliance complies with the following E.E.C. Directives: - 73/23 or 19.2.73 (Low Voltage Directive) and subsequent modifications; - 89/336 or 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.