User`s guide

Thank you for buying a ZANUSSI product

This scale operates on 1 – 3 volt CR2032 lithium battery (installed). There is a strip under

the lithium battery cover to prevent battery drain in shipping. Please remove the strip

before continuing with these instructions.

Replace the battery when the Low Battery icon “ Lo ” appears in the middle of the display,

or the readings grow dim or irregular. To replace the battery:

BATTERY INFORMATION

• Use one 3 volt CR2032 lithium battery

• Remove the cover

• Remove the old battery from the compartment

• Place the new battery with the “+” sign up into the battery compartment

• Replace the battery compartment cover

• NOTE: Please recycle or dispose of batteries per local regulations

WARNING: Batteries may pose a choking hazard. Do not let children handle batteries

• You can do consecutive weighing, without removing the weighing container which

already placed on the glass platform. Each time before adding additional object into the

container, simply press ‘ON/TARE/OFF’ button, the tare function will be operated and the

LCD reading will return to zero. Then place new additional object to the plate, the final

stabilized LCD reading indicates the net weight of the added object only

• During tare function being activated, LCD will show with an icon “TARE” on the left

bottom side. After removed the original object from the plate, LCD will start to show

negative value of the object just removed

TARE OPERATION

Please read instruction manual carefully before using the product for the first time

Please keep instructions in a safe place for reference

GENERAL WEIGHING OPERATION

• Clean exposed parts with a soft, slightly damp cloth. To remove stains,use a mild soap

• Never use detergents, excess water, treated cloths, harsh cleaning agents, or sprays

ADVICE FOR USE AND CARE

• Remove the insulation sheet from the battery contact before using

• Place the scale on a firm, flat and even surface to ensure its accuracy. If using another

bowl/container to weigh, place the bowl/container on the middle of its glass platform

• Press ‘‘ON/TARE/OFF’’ button(only one button on the right side of the scale) to turn on

the scale. The LCD screen will display “8888’’, after about 3 seconds later, the LCD screen

will show zero reading status, then you can weigh anything you want

• Place the object on the middle of the glass platform, if using another bowl/ container to

weigh, also place it on the middle of the glass platform

• Scale will auto switch off if LCD screen shows zero for about 30 seconds

• Scale will auto switch off should without any operation for about 30 seconds

• In order to maximize the battery life, you can press the “ON/TARE/OFF” button for 3

seconds to switch off the scale manually