User manual

7
When using this setting, heat comes from both the top
and bottom elements. This allows you to cook in a single
level and is particularly suitable for dishes which require
extra base browning such as pizzas, quiches and flans.
Gratins, lasagnes and hotpots which require extra top
browning also cook well in the conventional oven. This
form of cooking gives you the opportunity to cook without
the fan in operation.
How to Use the
Conventional Oven
1. Turn the oven function control knob to the required
cooking function   .
2. Turn the thermostat control to the required temperatu-
re.
Top oven element only
This function is suitable for finishing cooked dishes, eg;
lasagne, shepherds pie, cauliflower cheese etc.
Bottom oven element only
This function is particularly useful when blind-baking
pastry or cooking pizza. It may also be used to finish off
quiches or flans to ensure the base pastry is cooked
through.
THINGS TO NOTE
l The oven light will come on when the oven function
control knob is set.
l The cooling fan will operate continually during cooking.
It may run on after the oven is switched off to keep the
controls cool. This is quite normal.
l The thermostat control light will remain on until the
correct temperature is reached. It will then cycle on
and off to show that temperature is being maintained.
NOTE
The action of the cooling fan will depend on how long the
oven has been used and at what temperature. It may not
switch in at all at lower temperature settings nor run on
where the oven has only been used for a short time.
Using the Conventional Oven
Hints and Tips
The middle shelf position allows for the best heat
distribution. To increase base browning simply lower the
shelf position. To increase top browning, raise the shelf
position.
The material and finish of the baking trays and dishes
used will affect base browning. Enamelware, dark, heavy
or non-stick utensils increase base browning, while oven
glassware, shiny aluminium or polished steel trays reflect
the heat away and give less base browning.
Always place dishes centrally on the shelf to ensure even
browning.
Stand dishes on suitably sized baking trays to prevent
spillage onto the base of the oven and make cleaning
easier.
Do not place dishes, tins or baking trays directly on the
oven base as it becomes very hot and damage will occur.
For faster preheating use the fan oven function to preheat
the oven until the oven indicator neon goes out, then swich
the selector to the conventional oven setting.
Single level cooking gives best results. If you require more
than one level cooking use the fan oven function.
The Safety Thermostat
This oven is provided with a safety thermostat. In case of
malfunctioning of the main thermostat, and consequent
over-heating, the safety device will stop the power supply
to the appliance. If this happens, call your local Service
Centre. Under no circumstances should you attempt to
repair the appliance yourself.
Cooling fan
The purpose of the fan is to cool the control panel, the
knobs and the oven door handle. The air stream flows
out between the control panel and the oven door handle.
To ensure proper cooling, the fan will continue to operate
even after the oven is turned off, until normal temperature
levels have been reached.