User manual

5
Thermostat control knob (Fig. 2)
Turn the thermostat control knob to select temperatures
between 50°C and 250°C (MAX).
Thermostat control light (°C)
Once the oven temperature has been selected, the
temperature light will come on and remain on until the
oven has reached the correct setting; after that, it will go
on and off with the thermostat, showing how the tempe-
rature is being maintained.
Oven control light (I)
It will come on every time an heating element is set on
operation.
50
MAX
100
150
200
FO 2673
Fig. 2
The Safety Thermostat
This oven is provided with a safety thermostat. In case of
malfunctioning of the main thermostat, and consequent
over-heating, the safety device will stop the power supply
to the appliance. If this happens, call your local Zanussi
Service Centre. Under no circumstances should you
attempt to repair the appliance yourself.
The cooling fan
The cooling fan is designed to cool the walls of the oven
and the components of the oven itself.
The fan switches on automatically after a few minutes of
cooking. Warm air is blown out through the aperture near
the oven door handle. When the oven is switched off, the
fan will remain on in order to cool the oven and kitchen
cabinets properly, after which it switches off automatically.
NOTE: The fan may run up to 45 minutes after cooking
has been completed. Leaving the door ajar will lessen
the cooling time.
FO 2259
Fig. 3