pro keys Online Manual
Warranty Registration Your ZAGG Pro Keys wireless keyboard and detachable case comes with a one-year manufacturer’s warranty. In order to activate the warranty, you must register your Pro Keys as well as keep your purchase receipt. If you purchased your Pro Keys from ZAGG.com, ZAGG has already registered it and has a copy of your proof of purchase. Need more help? Please see our FAQ section at: www.zagg. com/faq See the important Health and Safety information on page 12 before using this product.
INSERTING YOUR DEVICE 1 2 1. Holding your device in landscape mode with the volume control buttons facing up, press the top half of your device into the case and apply light pressure to snap it snuggly into place. 2. Press the bottom half of your device into the case and check each corner to make sure your device is seated properly.
3. Once your device has been inserted into the case, attach the case to the keyboard by setting the case in one of the two cradles on the keyboard (above the keys). 4. Place the top of the magnetized, foldable back flap against the top of the back of the case. You’ll feel it magnetically snap into place. This should create a triangular stand at the base of the flap that props up your tablet in the case. 5. To detach the case from the keyboard, simply pull the magnetized back flap away from the case. 6.
REMOVING YOUR DEVICE 1. To detach the case from the keyboard, simply pull the magnetized back flap away from the case. 2. To remove your device from the case, hold on to the top lip of the case and press against the back of the case. Then, grasp the exposed side of your device and lift/pull it away from the cover.
POWERING ON AND OFF 1. To turn your Pro Keys on, press the Power button located at the top right corner of the keyboard. A green LED will light briefly. 2. To turn your Pro Keys off, press and hold the Power button for three seconds. A red LED will flash indicating it has turned off.
PAIRING YOUR PRO KEYS Your Pro Keys keyboard can pair with up to two devices at once. Pairing your Pro Keys is easy. Just follow these instructions. 1. Ensure your device’s Bluetooth® is on. 2. Press and hold Pro Key’s Bluetooth 1 or 2 keys for three seconds. A blue LED on the Power button will begin pulsing, indicating your Pro Keys is in pairing mode. 3. Your device will display “ZAGG Pro Keys” as an available pairing option. Select it and complete any other pairing steps based on your device. 4.
DISCONNECTING YOUR KEYBOARD Your Pro Keys features a case that protects your device even when it’s not connected to your keyboard. When you’d like to use the case without the keyboard, there are three ways you can switch to your onscreen keyboard. 1. To activate your device’s keyboard once disconnected, press the Keyboard Hide/Show button. 2. Turn off the Bluetooth® connection from your device. 3. Turn your Pro Keys keyboard off.
CHARGING YOUR KEYBOARD Your Pro Keys features a case that protects your device even when it’s not connected to your keyboard. When you’d like to use the case without the keyboard, there are three ways you can switch to your onscreen keyboard. 1. Plug the Type-C connector into the charging port on the keyboard. 2. Plug the regular USB connector into any 5V USB outlet. A red LED will light to indicate your keyboard is charging. This LED will turn off when your keyboard is fully charged.
BATTERY LIFE To check your Pro Keys’ battery life, press fn + the battery key.
SPECIAL FUNCTION KEYS Your Pro Keys keyboard has been designed with the following special function keys to give you more control of your device. 1 & 2 PAIRING – Activates your device’s pairing mode. HOME – Displays your device’s home screen. LOCK – Activates and deactivates your device’s sleep mode. APPS RUNNING – Displays all of the apps currently running on your device. LANGUAGE SYMBOL – Toggles between keyboard languages (if active on your device); also, pressing cmd + spacebar will do the same.
TROUBLE SHOOTING If your device doesn’t respond to Pro Keys, there may be a simple explanation such as a dead battery or unsuccessful pairing. Please use the following to help troubleshoot your situation. If none of the following solve your issue, please contact ZAGG Customer Service and one of our trained professionals will be happy to assist you. 1. Restart your device. 2. Turn your Pro Keys off and back on. 3. Forget and re-pair your Pro Keys. 4.
Please read the precautions and operation information before using your keyboard or any accessories that accompany it. Retain this information for future use. 1. Take frequent breaks when using your keyboard. If you experience any discomfort, pain, tingling, numbness, or burning in your neck, shoulders, arms, wrists, hands, or any other part of the body, stop using your keyboard and consult a physician. 2. Use only Type-C USB chargers in connection with your keyboard. 3.
©2021 ZAGG Inc All Rights Reserved PATENTS: zagg.com/patents | NASDAQ: ZAGG | MADE IN CHINA Apple and iPad Pro are trademarks of Apple Inc., registered in the U.S. and other countries. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by ZAGG Inc is under license. USB-C is a trademark of USB Implementers Forum. Other trademarks and trade names are those of their respective owners. ZAGG, InvisibleShield, and Pro Keys are trademarks of ZAGG Inc.
