® Electronic Cutter Fabric Starter Kit w/Bluetooth® Cutter Électronique Kit de Démarrage Pour Tissu avec Bluetooth Guillotina Electrónica Kit Básico de Telas con Bluetooth USER’S GUIDE GUIDE DE L'UTILISATEUR MANUAL DE USO eCAL2 Software included! Logiciel eCAL2 inclus! ¡Incluye el Software eCAL2! Read Guide Before Operating Product. Save Guide For Reference. Veuillez lire ce Guide avant d'utiliser le produit. Conservez ce Guide pour le consulter au besoin. Lea el manual antes de operar el producto.
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS READ THESE IMPORTANT SAFETY INSTRUCTIONS THIS DEVICE IS INTENDED FOR HOUSEHOLD USE ONLY WARNING To reduce the risk of fire, electrical shock or personal injury, it is important that you read and understand all the instructions and warnings that come with your eclips®2 Electronic Cutter (“Product”). ELECTRICAL SHOCK HAZARD Product is an electrical device. Use with caution.
CONTENTS CONTENTS 7 1 4 2 5 9 6 10 3 8 CONTENTS 1. 2. 3. 4. 5. eclips®2 Electronic Cutter (26" x 6 1/2" x 7") (Model # EC-C1400) Bluetooth® Universal Power Supply Power Cord eclips®2 User's Guide and Bluetooth® Instructions Blade Holder 6. 7. Blades, Standard, 2 Pack (2) 12" x 12" Cutting Mats**: (1) for fabric (Coral); (1) Standard (Blue) 8. 6ft USB 2.0 Cable 9. Pen Holder 10. Scraper To install eCAL2 Software for your new eclips®2 Electronic Cutter: 1. 2. 3. 4. Go to http://www.sizzix.
SET UP SET UP CONNECTING Right Side of Machine Computer USB Port 1. 2. 3. Plug Power Cord into Universal Power Supply. Plug Universal Power Supply into side of eclips®2 Machine. See Bluetooth® Instructions or for USB connection: 1. Plug USB cable into back of eclips2 Machine. 2. Plug flat end of USB cable into USB port of computer. SETTING THE BLADE DEPTH NOTICE DO NOT adjust blade depth while Machine is operating.
SET UP 5 INSERTING THE BLADE INTO THE BLADE HOLDER CAUTION: CUTTING HAZARD Blade is sharp, handle with care. Non-Cutting Side Safety Cap Angled Cutting Edge Insert this end into Blade Holder 1 Carefully remove Safety Cap from Blade, exposing Angled Cutting Edge. 2 Carefully insert Non-Cutting Side of Blade into hole at bottom of Blade Holder. Blade is held in place magnetically. 3 Note that Blade is exposed, but barely visible, when inserted properly.
SET UP WORKSPACE PLACEMENT Leave 12 to 24 inches of clear space behind your eclips®2 Machine to allow full Cutting Mat movement. Place your eclips2 Machine at least 12 inches from the edge of your work surface to prevent it from tipping over and causing possible injury. 12" – 24" ENVIRONMENT Place eclips2 Machine on a clean, level, dry and sturdy surface. 12" STARTING THE MACHINE NOTICE DO NOT unplug USB cable from computer while Machine is in use. This will cause loss of data.
MAINTENANCE 7 MAINTENANCE CUTTING BLADE MAINTENANCE CLEANING THE CUTTING BLADE CAUTION: Always unplug Machine before removing or installing Blade Holder. After prolonged use, the Cutting Blade may not cut as precisely as it once did. To help prolong the life of the Cutting Blade, remove it from the Blade Holder and clean it with Isopropyl Alcohol (rubbing alcohol) poured onto a clean paper towel. Remove any material left inside the Cutting Blade Holder, using a Die Pick Tool. Visit sizzix.
TROUBLESHOOTING TROUBLESHOOTING Problem: eclips®2 system will not turn on • Unplug system from wall outlet before troubleshooting. Make sure all components and connectors are plugged in properly (see pg. 4). When everything is connected, plug system into wall outlet and press power ON (see pg. 6). Problem: eclips2 Machine freezes up • Turn off Machine and restart (see pg. 6).
END USER LICENSE AGREEMENT END USER LICENSE AGREEMENT ECLIPS®2 ELECTRONIC CUTTER BY SIZZIX® Ellison Educational Equipment, Inc., doing business as Sizzix® (“Sizzix”) is willing to grant to you a license to use the eclips®2 Electronic Cutter (the “Product”), subject to your acceptance of the following terms and conditions. Please read the terms of this Agreement carefully. Your use property rights, subject only to the limited rights granted to you in this Agreement.
WARRANTY WARRANTY ECLIPS®2 ELECTRONIC CUTTER BY SIZZIX® 90-DAYS LABOR, ONE-YEAR PARTS LIMITED WARRANTY the Product; acts of God; limitations of technology; or use of the Product for commercial, rather than personal, applications. The cutting blades, blade housing, cutting mat and any What Does This Warranty Cover? accessories are also excluded from this Limited Warranty.
