ZADI S.p.A. 30th August 2019 User Manual BMW Keyless Ride System INDEX OF REVISIONS: 30.08.
ZADI S.p.A. Index 1. 2. 1.1 1.1.1 1.1.2 1.2 1.3 1.4 1.5 1.6 1.6.1 1.6.2 3. 3.1 4. 4.1 4.1.1 4.1.2 4.2 4.2.1 4.2.2 5. 5.1 5.2 5.2.1 5.2.2 5.3 ABBREVIATIONS .............................................................................................................................. 3 DESCRIPTION ................................................................................................................................... 3 Key ON .........................................................................
ZADI S.p.A. 1.
ZADI S.p.A. 1.1 Key ON 1.1.1 Normal Mode The user recognizing with the active key (2) is performed as described below: · press the Lock/Unlock button (6) on the handlebar of the vehicle for less than 1 second (customizable parameter); · the main unit (1) performs the radio frequency authentication of the key (2 or 3) by sending a request on LF band though the LF antenna (5); · if the active key (2) is within the LF detection range (1.
ZADI S.p.A. 1.3 Steering lock To engage the steering lock: · stop the vehicle (perform a Key OFF); · keep the active key (2) or the passive key (3) within the recognizing area; · press the Lock/Unlock button (6) and hold it depressed for more than 3 seconds (customizable parameter) with steering turned completely to the left or to the right: steering lock will be engaged after this time (the bolt of the system (7) goes out). 1.4 Steering unlock To unlock the steering, perform the Key ON procedure. 1.
ZADI S.p.A. 3.1 Replacing the battery in the active key It is strictly forbidden have access to the inner electrical component of the user key, except for the battery compartment in order to replace the battery exhausted. To replace the battery in the user key follow the procedure described below: NR. DECRIPTION 1 Turn the key upside down 2 Push the release key blade button 3 Key blade open May 30th 2019 ILLUSTRATION DO01-#100624-v1-BMW_KLR_K35_USERMANUAL.
ZADI S.p.A. NR. DECRIPTION 3 Identify on the right side of the key the battery cover release cut ILLUSTRATION Using the nail (or a plastic leverage) apply a pressure to remove the battery cover 4 Note: DO NOT use a screwdriver or a knife or a metal leverage 5 Open the battery cover and place it in a safe place (pay attention to the o-ring gasket) May 30th 2019 DO01-#100624-v1-BMW_KLR_K35_USERMANUAL.
ZADI S.p.A. NR. DECRIPTION 6 Using the thumb push gently down and to the front part of the key 6.1 Previous phase will free the battery to be removed 6.2 Push in the upper side of the battery to release it May 30th 2019 ILLUSTRATION DO01-#100624-v1-BMW_KLR_K35_USERMANUAL.
ZADI S.p.A. NR.
ZADI S.p.A. NR. DECRIPTION 10 Check that the o-ring gasket is positioned correctly 11 To close the battery cover repeat the “Point n°5” in the revers way 12 Apply a pressure in the right side of the battery cover until you hear a “click” May 30th 2019 ILLUSTRATION DO01-#100624-v1-BMW_KLR_K35_USERMANUAL.
ZADI S.p.A. NR. DECRIPTION 13 Push the release button and close the key blade 14 Replacement completed. Enjoy your ride!!! May 30th 2019 ILLUSTRATION DO01-#100624-v1-BMW_KLR_K35_USERMANUAL.
ZADI S.p.A. 4. Technical Specification 4.1 KLR Main Unit 4.1.1 Electrical features Nominal voltage Operating voltage Operating temperature Storage temperature Operating Current consumption Stand-by Current consumption Key supply output ( +15 ) 2nd Output supply Operating Frequency LF Operating Frequency HF RF Power Modulation Type 13.5V 7.5-16V -25°C @ +60°C -40°C @ +85°C ≤ 150 mA @ 12 V < 1 mA @ 12 V 2A 2A 134.5 KHz 433.92 MHz < 66 dBµA/m @10 m (129.
ZADI S.p.A. 5. Certification 5.1 USA Certification Product name: Keyless Ride System Main Unit FCC ID: VFZKLRMZB001 Product name: Keyless Ride System Active key FCC ID: VFZKLRKZB002 Warnings This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC§ 15.
ZADI S.p.A. 5.2 Canada Certification 5.2.1 Main Unit Certification Product name: Keyless Ride System Main Unit (ZB001) IC: 22239-KLRMZB001 This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
ZADI S.p.A. 5.3 Technical details for China market BMW Keyless Ride System composed by: (1) Main Unit ZB001 (134.5 kHz) General transmitting SRDs; Category A equipment Operating frequency: 134.5 kHz (band 9-190 kHz) EMF emission: < 72 dB µA/m (at 10 m) (-3 dB/octave) (quasi-peak) Extreme environment condition: -25 °C + 60 °C (2) Active Key ZB002 (433.92 MHz) Radio control device for various kinds of civilian equipment Operating frequency: 433.00-434.79 MHz Transmit power limit: <10 mW (e.r.
