WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
The following are the suggested text on SAR information Specific Absorption Rate (SAR) information The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. This model (FCC ID: YROG222) has also been tested against this SAR limited. The highest SAR value reported under this standard during product certification for use at the ear is 0.713 W/kg. There are no body worn configurations (e.g. belt-clips, holsters or similar accessories), then body SAR is not required.
Contents Preface.................................................................................................................. 7 Quick Start............................................................................................................ 9 2.1 Icons Help .............................................................................................................. 9 2.2 Keys description..................................................................................................... 9 2.
6.6.3 GPRS settings ............................................................................................... 33 6.6.4 Restore Default .............................................................................................. 33 7. Multimedia .......................................................................................................... 34 7.1 Camera ................................................................................................................ 34 7.1.1Take photos......
12.2.1 Time and date .............................................................................................. 69 12.2.2 Language ..................................................................................................... 69 12.2.3 Input modes ................................................................................................. 69 12.2.4 Set shortcut.................................................................................................. 69 12.2.5 Auto power on / off ....
16.2.3 Emergency Call............................................................................................ 95 16.3 Accessing password........................................................................................... 96 16.3.1 Password of power-on ................................................................................. 96 16.3.2 PIN ............................................................................................................ 96 16.3.3 PIN2 .............................
1. Preface Respected mobile phone users, thank you for your purchase Spreadtrum platform for mobile phones. Using this kind of telephone will bring some surprised and pleasantly experience to you: Support dual GSM cards and dual standby function; the function of high-definition digital camera allows you to stay colorful memory; professional MP3 music player; the MP4 video player brings all-round multimedia and makes the body comfortable.
In order to ensure the best performance and avoid damage to the phone, please use the original accessories and battery and do not use the incompatible products. To avoid interference with blasting operations, please turn off your phone when you are in the blast site or at the place where the icon posted with "turn off two-way radio". Please note and observe any relevant rules or regulations.
2. Quick Start 2.1 Icons Help In the standby interface, the following icons may show up and their description is as follows: Icons Icons Discription Discription Indicate the intensity of network signal. Showing the battery capacity. Silent mode is actived. Vibrate mode is actived. Long ring mode is actived. High ring and vibrate mode New SMS. New MMS. Missed call. Alarm clock is set and activated. Bluetooth is opened. 2.2 Keys description 1.
Execute the functions displayed in lower right corner of the screen. And you can use it to delete the anterior letter near the cursor which you have input in the message or exit the interface of editing when there is no letter in the message. 3. Dial key There are two dial key. They are used to make a phone call by SIM1 or SIM2 and answer the telephone for SIM1 or SIM2; in standby state, adjust the record of the Dialed calls, the Received calls and the Missed calls. 4.
7. OK key: In Standby state, press it to enter the main menu or press and hold it to open or close the torch; otherwise pressing it to access the menu you have chosen. 8. * key: Input special symbols; in standby state, press and hold this key to switch among *, +, P and W. 9. # key: Press this key to input # or switch the input methods; in standby state, press and hold this key to switch between Silent mode and the General profile. 10.
¾ Remove the battery; ¾ Fit on the SIM1 (based on the slot with the sign of "SIM1"). When you are installing the SIM card, please make the contact dot down (make sure the direction of the gap on the SIM card is consistent with the slot) and then push the SIM card inside the slot until the full match (the installation method of SIM2 is similar to SIM1). ¾ Make the metal contact part of the battery aim at the contact pad position and fit on it, and then install the battery cover.
expand the phone memory with the memory card. The card which is near the SIM card slotes: ¾ Remove the back cover and battery; ¾ Make the side of Memory card which have the golden touch down, push the card with the narrow end first into the slot until it is fully consistent with the slot to complete the installation.
2.5 Battery Charging Use the travel charger ¾ Insert the battery into the phone correctly; ¾ Open the rubber cover underneath the phone, make the side which has arrow towards the screen, insert the charger plug into the charging interface, and then connect the travel charger to standard power outlet. ¾ After insert the charger, the battery strength icon in upper right corner of the screen starts scrolling that charging has begun.
4.To ensure the new battery achieving the optimal performance, please make the battery complete the battery charge and discharge cycles for two to three times. Several initial charge for new battery, please charge more than 10 hours continuously. 2.6 Switching on/off 2.6.1 Switching on ¾ Press the Hung_Up key about three seconds to swith on. 2.6.2 Switching off ¾ Press the Hung_Up key about three seconds to swith off.
Number keys of 1 to 2 Press and hold Get into the voice mail of SIM1 or SIM2. Number keys of 3 to 9 Press and hold Get into the appropriate speed dial.
3. Call functions 3.1 Make a phone call 3.1.1 Dial Directly ¾ In the standby state, enter the area code and the phone number. ¾ Press the Dial key of SIM1 to make a phone call by SIM1, press the Dial key of SIM2 to make a phone call by SIM2. 3.1.2 Dial Tray ¾ In the standby state, after pressing any number key, the dial interface showed, and then you can dial directly using the keyboard. ¾ Press the Dial key of SIM1 to make a phone call by SIM1, press the Dial key of SIM2 to make a phone call by SIM2.
¾ Enter the area code (usually without the preceding "0") and phone number. ¾ Press the Dial key of SIM1 to make a phone call by SIM1, press the Dial key of SIM2 to make a phone call by SIM2. 3.1.4 Make a call using contacts ¾ Get into the Contacts to find the record you need. ¾ Press the Dial key of SIM1 to make a phone call by SIM1, press the Dial key of SIM2 to make a phone call by SIM2. 3.1.
¾ In the dial-up screen, select [Option → Insert wpn→ Pause P], then enter the extension number. ¾ Press the Dial key of SIM1 to make a phone call by SIM1, press the Dial key of SIM2 to make a phone call by SIM2. The extension number will be sent out after switchboard number is dialed successfully for a few seconds. 3.1.7 Emergency call ¾ Enter the emergency number; ¾ Press the Dial key of SIM1 to make a phone call by SIM1, press the Dial key of SIM2 to make a phone call by SIM2. 3.
when you are communicating with somebody, the phone will prompte you with, and you can deal it as follows: Select [Maintain and Answer] or [Release and Answer] to answer the second call after pressing the Dial key of SIM1 or the Left soft key, and then the preceding call is set as maintain state automatically. Press the Hung_UP key or the Right soft key to reject the second call to continue the current call. 3.2.
¾ Call record: enter the list of call history. ¾ Start/Stop to record: record the content of communication and then select [Menu → Stop to record] to stop the recording. At this point the phone recording will be saved in the [Tools → Recorder → Option → Record file list] automatically. Attention: Recording of the call is illegal in some countries. Therefore, when you are recording about the call, you should seek the consent of the other party at first.
4. Call log 4.1 Dialed numbers Display the resent records of dialed calls. Select one of them and enter [Option]: Function Option Show the details about the selected record. Detail Call Select SIM1or SIM2 to make a call. Save Store this record to SIM or phone. Send message SMS Send out a message to that number. MMS Send out a multimedia message to that number. Add to existing contact Add this number to Contacts of phone.
4.2 Received calls Display the received calls which you have answered recently. The operation of "Received calls" and "Dialed calls" is similar. 4.3 Missed calls Show the recent records of missing. The operation of "Received calls" and "Dialed calls" is similar. 4.4 Rejected calls Refuse to accept the phone number which has been set. 4.5 Delete All Remove all telephone records. 4.6 Call timer Select the type of SIM card you want to view and then you can see the related information about timer.
4.7 Call costs (need network support) ¾ All costs: check the total cost for SIM1 and SIM2. ¾ Max costs: Set the max cost for SIM 1 and SIM 2, you can also edit it. ¾ Cost rate: Set the price for SIM 1 and SIM 2, you can also edit it. ¾ Cost reset: The total cost of the call will be cleared to zero. 4.8 GPRS flowrate View the correlative information of GPRS counter.
5. Contacts The phone prepares high-capacity phone storage space carefully for you. The capacity for storing depends on the SIM card. 5.1 Search contact In the standby state, select [Contacts] and enter the contacts list for viewing. Carry out searching location through the keys on the keyboard directly (it supports fuzzy search). # Example: search "李四" Enter "57" can find it, for the corresponding phonetic of "李" is "l" and the corresponding phonetic of "四" is "s".
Option Function Show all contacts in SIM1, SIM2 and in the All phone. Unclassed group Show the contacts of " Unclassed group ". SIM1 Show all contacts stored in SIM1. SIM2 Show all contacts stored in SIM2. Show all contacts whose group set as Family "Family". Show all contacts whose group set as Friends "Friends". Show all contacts whose group set as " Colleagues Colleagues ". Show all contacts whose group set as Classmates "Classmate ".
"Other 3". The order of contact is in accordance with unnamed, special symbols, numbers, letters (if it is Chinese name, you can select the names by the corresponding Chinese phonetic alphabet). 5.2 Quick Search In the standby state, select [Contacts] and enter the contacts list for viewing. Carry out searching location through the keys on the keyboard directly (it supports fuzzy search).
Dial up Send vCard Call the current number. You can select dial directly or make an IP dial. Sent this record via SMS or Bluetooth. Delete Delete the current record. Mark Mark the current record or mark all the records. Copy Copy the record to SIM1 (SIM2), U disk or memory card. Others Speed dial setting Add this number to the list of speed dial.
number, home phone, business phone and so on. You can choose caller picture and caller ring tone for the current contact. ¾ SIM1 / SIM2: add contacts to the SIM1 or SIM2 and it can store only one number to each name. Note: The name of new contact can be empty but the number of it can not be empty.
6. Internet The Internet is the application platform which combines the wireless communications and Internet and it enables you to get rich application by phone, such as Internet information resources and e-commerce. In the standby state, press the middle key to enter the main menu and them select "Internet.
directly. 6.3 Bookmarks The bookmark is blank as default and you are free to edit it. Commonly used website can be saved in the bookmarks with a simple name tag. Select one of the bookmarks and then you can connect to the current web site directly. The setting operation is as follows: Add bookmark: Select it, input the address and name for the bookmark and then select save. 6.4 Histories Record the web sites you have visited previously. 6.
6.6 WAP settings 6.6.1 Browser settings ¾ Clear cache: In order to avoid congestion and improve the speed of web browsing, please clear the cache periodically. ¾ Network account SIM1/SIM2: Select the accout for SIM1 or SIM2. ¾ Image download: activate the feature and then the image of the download page can display. ¾ Play background sound: start it and then you can play the background music. ¾ Accept pushmsg: you can receive Push messages after activating the feature.
6.6.3 GPRS settings Set the GPRS is always opened or opened when necessary. 6.6.4 Restore Default WAP settings can be restored to the initial state. In the interface of browsing the web, make the focus switch among the address bar, web and tool bar by pressing the "left soft key". Use the toolbar: The icon shows the following table when you are browsing the web: Icons Funtion Home: Return to homepage. / Refresh: Update the page content or close it.
7. Multimedia 7.1 Camera Get into the Multimedia, select [Multimedia → camera] to enter the camera interface. 7.1.1Take photos In the camera interface, use the up and down keys to adjust the focal length; use the left and right key to enter the [shooting Settings]; use the middle key to take pictures. In the [shoot mode] under the menu of [shooting Settings], select [DC mode] to begin to find the view.
Exposure bias: Use the up and down keys to set the exposure compensation effect. Frame: You can choose No frame or Frame1. Cont. shot: Set the continuous shot mode. White balance: Select Auto, Incandescence, Fluorescent, Daylight or Cloud. Delay: You can set the timer as disabled, 3s or 10s. After setting the delay time, the camera interface will appear the countdown in the preview screen after pressing the middle button to take photos.
Storage: Set the storage location for the current photo. Help: Provide the help information. 7.1.2 DV In the [shoot mode] under the menu of [shooting Settings], select [switch to shoot] to begin to find the view for filming. ¾ shooting settings In the interface of camera viewfinder, use the left and right keys to enter the [shooting settings] to set: Shoot mode: You can switch between DC mode and DV mode directly. Size: Set photo’s resolution is 320x240, 176x144, 160x128 or 128 x96.
Type: Set the video files as AVI or 3GP according to your need. Display parameters: Open it, the upper left corner of the preview interface for shooting will show the parameters of shooting. Storage: Set the storage location for the current photo. Help: Provide the help information. Description: If you are shooting, there are calls, MMS, alarm clock and other information coming, the current shooting video will be saved automatically. 7.
/ Select them to go to the upper song or the next song. Stop playing. No Lyrics Display the lyrics. The suffix Lyrics is lrc, lyrics and files must have the same name and they are placed in the same directory, then the lyrics can be displayed. Display lyrics when the screen is in the state of always lighting. Plus or minus the volume. Press the * key and the # / key to adjust the volume. The progress bar shows the progress of music playing.
background playing mode, these keys which are just under the phone screen can be used to bring convenience to you: key to play the upper song; press the please press the key to play the next song; press key to make the audio player in the pause state or playing state the when the phone is in the audio player interface, press the key to enter the audio player directly when the audio player is in the background playing mode; press the key to let the audio player stop. 7.2.
Add music: The audio in the memory card can be added to playlist. Delete from list: The selected audio file will be removed from the current playlist. Save list: Save all the songs under the current in the list with the custom name, then you can press [Playlist] to find the playlist name you have saved. Clear current play list: Clear all the audio files in the current list. ¾ All play lists: Show all of playlists. The "All music" is a fixed list and you can not delete, rename or copy it.
¾ EQ setting: EQ settings can be set and it is divided into "General", "Classical", "Concert", "Jazz", "Rock" and "soft rock." 7.3 Video Player Video player supports files with the format of 3GP, MP4 or AVI. If the document is non-standard format, the conversion tool is required to convert these files into standard format. Access the main menu and select [Multimedia → Video Player].
Enter the video player screen, press [List → Option] to open the action menu. ¾ Play: Play video file at the cursor. ¾ Add video item: Select the video files from the U disk or memory card to add to the playlist. ¾ Update list: Refresh the current playlist. ¾ Delete from list: The selected video file is deleted from the playlist. ¾ Detail: View the details of the music files. ¾ Power on animation: The selected video is set as starting animation.
/ The */# key Adjust the volume size. Showing Display the volume of the radio. In the "FM Radio" interface, click [Option] to enter the following menus: ¾ Auto search and save: Search all the radio channels automatically and save them to the "Channel list" automatically. ¾ Channel list:Displays the radio channel after the entire search, the channel can be selected through up and down keys and then press the middle button to listen to radio channels directly.
8. Message Message is the network service, wether the menu can run or not is connected with the type of your SIM card and the network operators. Please make sure this function of service before using this feature. 8.1 Write message Before using this feature, you must obtain the appropriate service center number from the network operators. The capacity of the SIM card memory is based on the type of different card. 8.1.
¾ Send: After inputting the destination number or pressing the left soft key to enter the necessary record through the contacts, you can send out message. ¾ Insert template: Insert templates into the text at the position where the cursor is on. ¾ Contact info: You can extract name and phone number from the contacts and then insert it into the message content. ¾ Add phiz: Insert emotion icons into the text in the cursor position. ¾ Save: Save the edited message to the Drafts. 8.1.
¾ Send: Send the edited MMS to the objective number. Before selectting the menu, you must set up the recipients ' number in advance. ¾ To: Add the recipients’ number by [add recipient] or [Add Group]; you can also edit or modify the existing recipients. ¾ Cc: You can Cc the MMS to the designated number of the recipients. ¾ Bcc: All the recipients and the Cc recipients can not see the number of Bcc recipients after receiving this MMS. ¾ Edit title: Edit the content of MMS title.
z Delete picture: Delete the current picture (the option will appear after insertting a picture into current page). z Delete sound: Delete the current sound (the option will appear after insertting a sound file into current page). z Delete video: Delete the current video (the option will appear after insertting an video file into current page).
8.2 Inbox Store the received SMS and MMS. 8.3 Outbox Save the SMS and MMS which send out failed. 8.4 Draftbox Save the SMS and MMS which are not sent out. 8.5 Sentbox Save the SMS and MMS which you sent out successfully. If you want to save the messages which you sent out automatically, you need select [Message → Option] and set it under [Settings → SMS sent messages stored]. 8.
8.6.1 Template SMS The default message in the Templates can be used directly when writing SMS. By editing, you can self-set up five common template messages. 8.6.2 Voice mail This feature is similar to the answering machine, with which you can thansfer the missed call to your own proprietary voice mail, it means let the caller leave an oral message and to notify that you have oral messages in voice mail messages via SMS.
Number settings: Enter (or modify the existing) the voice mailbox number obtained from the network operator's. ¾ Fax number The related operations are similar to "voice number". It is determined by the network operators, it is not supported in the domestic state currently but the foreign supports for this business! ¾ Data number The related operations are similar to "voice number".
8.6.4 SMS settings ¾ SIM1 / SIM2 msg counter: When you send out text messages, you must set the service center number of network operator. You can also obtain the number from the network operators. Most of the SIM cards have already contain the service center number. Note: If you modify or delete the message center number, you might not send out text messages.
¾ Read report: Select [Open], then when the receiver read the multimedia message, the network will send the read report to you; you can choose [Close]. ¾ Anonymous: Select [Open], the MMS can be sent to the designated receiver without displaying the sender number. ¾ Pirority: Set the priority level of MMS. ¾ Receive MMS: The phone provides you with [Manual receiver] and [Auto Receive].
9. Tools 9.1 Alarm In the standby state, press the middle button to access the main menu and select the [Tools → Alarm], you can set the name, time, tone and repeat mode for alarm. The phone has three alarm clocks, which can be open simultaneously. Each alarm can be set as single reminder, daily reminder or weekly reminder. 9.2 Calendar In the standby state, press the middle button to access the main menu, and then select the [Tools → calendar].
¾ Clear all: Clear the all schedule reminders. ¾ Go to date: Query the calendar information according to the inputting date. ¾ By week / month: Set display mode of the calendar. 9.3 Calculator The calculator provides you with four basic functions, by which you can carry on simple operation for your convenience. Select the calculator, the calculator interface is showed: Input data directly by pressing the keyboard * Press the " " key for a decimal point (.
and then select [Tools → Option →Recorder → Start to record] to starting recording, or use the middle button to select the icon start recording. Select the icon in the interface to to pause; select the icon or press the right soft key to select [Stop] to stop recording. After choosing to stop recording, the audio file will be saved automatically in the folder of "Audio" exited in memory card, you can choose the icon to view it in the [Option → Record file list].
The phone supports the STK function, but this service provided by the network operator. If the SIM card and the network operators do not support that kind of service, this feature will not be used. For more information, please contact your network operator.
10. Pastime 10.1 Picture Brower This feature is convenient for users to browse photos and images stored in the phone quickly. In the interface of "Picture browser", press the middle button to preview the selected image; press [Option] can operate the following functions: ¾ Change folder: Set the default image browsing path for "Image browser". ¾ Send: The selected picture can be sent out through MMS or Bluetooth.: ¾ Slide play: View the image in slide way with full-screen.
10.2 EBook The E-book reader supports browsering the TXT format files, you can copy files from PC to the [Ebook] folder in T-FLASH card. In the standby state, press the middle button to access the main menu and then select [Entertainment → E-book] to enter it. In the interface of E-book list, press the middle button to read these E-books directly.
In the e-book folders, select a document and press [Option] to access the appropriate Option: ¾ Detail: View the details of the selected E-book for date, time, size, location and other information. ¾ Last read books: Check the E-books which you have readed recently. ¾ Send with BT: Send the selected documents of E-book to others via Bluetooth. ¾ Delete: To delete the selected document of E-book. ¾ Mark: Mark: When the selected file is not marked, this menu is effective.
10.3 Boxman Push all the boxes to the specified destination can cross the border. Use the up / down keys or the right / left keys to move the porters to free space; select the "Return" can exit out of the game interface.
11. File list You can edit the folders in the U disk or in the memory card. These files below are used as follows: ¾ My music: Store the audio files. It can store the recording files with the wav format; Mp3, midi, amr and aac can be stored, too. ¾ Ebook: Store the electronic documents. It can store up to 500 books and the maximum limit for each is 5M. ¾ Photos: Store the image files. The the image format which can be previewing includes jpg, gif, bmp and wbmp. You can check it through the "Photo Manager".
In file list, press [Option] to get into the following menus: ¾ New folder: Create a new folder in the selected directory. ¾ Delete: Delete the selected file or folder. ¾ Detail: View the details of the folder or file. ¾ Edit: You can set the operations of "Rename" and "copy". ¾ Search: Search all the files in the memory card according to user-defined. ¾ Sort: Sort the files according to "name", "date", "size" or "type".
12. Settings 12.1 Call settings 12.1.1 Dual-SIM ¾ Set dual sys call forward Use this function, please set the machine number at frist. You can set the dual-card call transfer between each other, before using this feature, please select [Settings →Dual-SIM→ Dual SIM settings] and enter two SIM cards’ number. ¾ SIM enable select You can choose standby mode for SIM card. You can choose one of them: Only SIM1 enable, Only SIM2 enable or Dual SIM dual standby.
You can set to return the calls, SMS, MMS and using the internet by the current SIM card. Note: The priority of "Reply by original SIM" is higher than the "Dual SIM settings". ¾ Set SIM name You can customize the name of the SIM slot. ¾ Dual SIM settings wizard You can set the function of Dual SIM dual standby according to the prompt steps in accordance with the interface. ¾ Help Provide correclative information of help. 12.1.2 Network settings The phone offers [Auto Select] and [Manual select] for you.
12.1.3 Divert calls According to the conditions you have set for transfer, the incoming calls will be transferred to voice mail or the appointed number in the appropriate conditions. ¾ Unconditional: After open this function, any call to you will be transfered to voice mail or the appointed number under any condition. ¾ If busy: After open this function, any call to you will be transfered to voice mail or the appointed number when your cellphone is busy with other functions.
will ask the network to deal with current settings. The call barring Option provided for you are as follows: Option Description All outgoing calls Limit all outgoing calls to any phone. All incoming calls All calls are limited to dial this phone. Incoming when roaming Roaming calls can be not answered when roaming. All intl outgoing International outgoing calls are prohibited. Outgoing intl roaming The international roaming call is limite when you are in international roaming.
12.1.6 Hide ID (Requires the network to support) ¾ Hide ID: The receiver hide your phone number when you make a call. ¾ Display ID: The receiver will show your number when you are dialing. ¾ Display ID by network: The network will decide whether the receiver can show your phone number while you are dailing. 12.1.7 Line selection You can choose Line 1 or Line 2. ¾ Line 1: You can answer or make calls. ¾ Line 2: Select this option, whether you can make a call is depended on the network operator. 12.1.
Activate the feature, choose to [IP call] when you dialing up, or enter the number in the standby state, then press the middle ke y, with which can add the IP number before the dialing phone number automatically. ¾ 50 secs warning If you open it, the mobile phone will give "beep" sound to prompt after the first 50 seconds of every minute, by whitch you can end the call in time to save cost.
12.2 Phone 12.2.1 Time and date You can also set the time format and date format. ¾ Set time:Press the up/down keys and the left/right keys to set the current time. ¾ Set date:Press the up/down keys and the left/right keys to set the current date. ¾ Time display type:Set the time format as 12 hour or 24 hour. ¾ Date display type:Set the date format as "year-mouth-day", "month - day - year" or "day - month - year.". 12.2.2 Language There are two languages you can choose: English and Chinese. 12.2.
mode. 12.2.5 Auto power on / off You can set the phone power on / off automaticly. The setting method is the same as alarm. 12.2.6 Power management Show the power of the battery. 12.2.7 Restore factory settings Reset the parameter value of the mobile phone, with which can make your phone reset to default settings. Please enter the privacy password (the initial password is 1234) to restore factory settings. 12.
12.4.2 Standby style Choose the style of your standby interface. The phone offers two default styles: the basic style and smart style. 12.4.3 Set idle display Select the projects displayed in the standby state, including the time and date, operators, agenda and individual words. You can edit the individual words. 12.4.4 Contrast Set the brightness of the screen backlight. 12.4.
12.4.7 Animation effect Set the animation effect for powering on or powering off. 12.5 Security You can use the PIN code, PIN2 code, set the password of powering on and set the security feature to protect the security for information. 12.5.1 PIN PIN code (PIN1) is the personal identify number for SIM card. If the user does not change the original password, the password supplied by the operator is 1234 or 0000.
for 10 times continuously, the SIM card will be locked permanently, that means it is scrapped. The PUK code for some the SIM card is incidental with the SIM card, such as China Mobile's Shenzhouxing, etc, while the others need the network operators to obtain the PIN code. If your PUK code is locked and you do not know it, do not random input. The correct way is to call the hotline operators the SIM card belongs to. After verifying the simple user data, you can obtain the PUK code to unlock the phone.
12.5.2 PIN2 PIN2 code (PersonalIdentificationNumber2) is entered when you enter a particular function (such as setting a fixed number, set the call billing, etc.). PIN2 code is entered when a particular feature is used, such as the elimination for call cost information, set the unit for currency, to achieve cost limit function, limit to dial and so on. The PIN2 code provided by the supplier as another SIM card password, please contact your network provider to access PIN2 code.
12.5.4 Auto key You can select 5 seconds, 15 seconds, 30 seconds, 1 minute or 5 minutes to open the automatic keylock function; you can also select [Close] to close this function. When this feature is turned on, the automatic keyboard lock feature is started to prevent misuse. ¾ The operation of locking the keyboard manually is: In the standby state, press the Left soft key and then press the * key.
password or turn off this function. Description: There is no limit for the number of inputting the power-on password. Please remember this password in your heart, or if you forget it, it will not be turned on successfully for the next time. 12.5.7 Theft proof Theft proof feature (MSD) is also known as mobile dog. Its main function is to collect the current CELL ID (mean: cell ID) and other information sent to the pre-specified phone at the time when the phone is used illegally.
inserted, there will be a prompt box appeared to ask you to input the theft proof password if the phone is powering on. If you enter the wrong password for three times, or to opt out of interface, the phone will take it as illegal use, and gives an prompt of illegal use, and then the phone will read the CELL ID, LAC (means: location area code, used to identify the different location of areas), MCC (means: Country Code for Mobile.
If the phone takes this SIM card as illegal card and you want to open the anti-theft function, the phone will prompt you have no right to use, it means you can not use the security features of the corresponding menu under Theft proof. If the phone is switched on using another card and the password is entered correctly, the the message count for sending will start counting from 0 and the phone will prompt whether binding.
environments. The phone has 5 profiles: Standard, Silent, Vibrate, Low ring and High ring and vibrate mode. Each model has the default value, and you can set up according to your need. Press the left soft key to select "Option", the menus is as follows: ¾ Activate: Start the selected profile. ¾ Settings: You can set all kinds of effects to your own need. Ring set: You can set the ring tone about incoming calls and messages.
12.7 Link 12.7.1 Bluetooth ¾ Open /Close bluetooth: You can open or close your bluetooth device. ¾ Bluetooth visibility: Set to show or hide the Bluetooth device of your phone. When set to hide it, the external phone can not search for your Bluetooth device even you Bluetooth have been turned on. ¾ Paired device: Search for nearby Bluetooth devices which have enabled. ¾ Set shared files Directory sharing authority: It can be set to “Full control” or “Read only”.
You can choose the network account according by yourself. China Mobile GPRS, China Mobile MMS and China Unicom WAP are the three default account in your phone and you can not delete or edit these three accounts. You can also add your own network accounts. In the interface of Internet, press [Options] can carry on the following operations: ¾ Build a new link setting: Create new accouts through this menu. Security connect setting: Open or close the function of security by yourself.
¾ Delete a setting list: Delete the selected Internet account. ¾ Edit: Edit the selected Internet account. 12.8 Torch Open or close the torch; view the help imformation. Long press OK key in standby state to open or close the torch.
13. Additional features 13.1 The function of U disk Follow these steps to use the U disk: ¾ Before use, make sure the system of your computer is Windows2000 or WindowsXP. ¾ Connect the computer with your phone by USB data cable provided with the phone properly. ¾ After the phone is connected with the computer, select [U Disk] in the phone. When the computer identifies the U disk successfully, the status bar will appear a small green icon of the USB device in the lower right corner of the phone.
Note: 1. When the the phone is used in the state of U disk, you can see some default application files, and once you remove them, the default files will be lost permanently. 2. After using the U disk, at first remove the U disk from the computer equipment and get the notice from system, and then you can pull U disk safely, otherwise it will make data loss easily, even lead to the damage of U disk file system. 3. To support USB1.1.
14. Phone maintenance Mobile phone is an electronic product with high-precision, please maintain it carefully. The following suggestions can help you to maintain phoneand extend the lifespan of it: ¾ The phone and its accessories should be placed out of the reach of children. ¾ Keep the device dry. Rain, humidity or moisture will corrode the circuit board.
¾ Do not drop, knock or shake the phone severely, so as not to damage the internal circuit boards and precision mobile structure. ¾ Do not use chemicals, cleaning solvents or strong detergents to clean the device. You need use the soft cloth soaked in soapy water to scrub it gently. ¾ Do not use the pigment to paint your phone.It can avoid the moving parts be stuck, with which can affect the proper operation of your phone. ¾ Please use clean soft cloth to clean the lens, such as camera lens.
15. Eliminate the Simple Trouble In the course of using the phone, please consult the following table to guide the troubleshooting if the unusual circumstances happen; if the trouble still unresolved, please connect with the designated service center. 15.1 Phone can not switch on Possible reasons Solution The time of holding down the Press the Hung_Up key more than three seconds. Hung_Up key is short. The eletricity of the battery runs out. Please charge it. The installation of battery is incorrect.
The battery loose. Please install the battery correctly following the battery installation method in the instructions. Illegal use leads the phone can not turn on. Please enter the correct password. 15.3 PIN/PUK Lock Possible reasons Solution PIN (Personal Identification Please enter the correct password Number) / PUK code (unlock PIN) entered incorrectly. Note: 1. If you enter the wrong PIN code 3 times continuously, the SIM card and phone's many features will be locked. 2.
15.5 Can not receive calls Possible reasons Solution Open the function of Call divert. Please cancel this function according to your need. Open the function of Call barring. Please cancel this function according to your need. 15.6 Can not make calls Possible reasons Solution The phone is turned off. Please turn on it. Not in the network service area. Please make sure the network is in normal service state. Not insert the appropriate SIM card properly.
15.8 The opposing party can not hear your voice Possible reasons The microphone is too far away from the sound source. Solution Please make the microphone near your mouth. 15.9 Phone does not ring with incoming call Possible reasons Incoming call alert is set to mute. Solution Please reset the prompt for ring. Ring volume is set too low. Increase the volume tip. Open the function of Call barring. Please cancel this function according to your need. 15.
15.11 Reveal no network Possible reasons SIM card is not installed properly. Solution Please install the SIM card properly according to the installation method in instructions. SIM card and the contact of phone have impurity. Please ensure that they are clean. SIM card is invalid. Please check whether the SIM card is expired. Network environment is in the weak field area. Please go to the place where the network signal for phone is strong. 15.
15.14 The Option for PC Camera can not be achieved Possible reasons The "PC Camera" menu does not appear in the phone after the phone connected to the computer. Solution 1. Make sure the USB Interface is intact in the computer. 2. Make sure you are using the connection cable provided by the retailers correctly.
16. Safety Information 16.1 The environment for using In order to ensure your rational use about the phone and avoid the impact on you and the environment, please remember to comply with the rules and regulations when you use the phone anywhere. Please turn off your cell phone and comply with all safety signs and instructions in any place where may lead to explosion, such as gas stations, fuel depots, chemical plants or other place with blasting operations.
16.2 Medical equipment Please turn off your phone when you close to the electronic medical equipment, with the express provision for the shutdown of phone (such as pacemakers, hearing aids and other medical equipment). Most medical equipment can shield the RF signals of phones, but there are some electronic devices do not have this feature. If you doubt or can not ensure whether the medical equipments can shield the RF signals, please consult your doctor or the medical equipment manufacturers. 16.2.
Note: If you suspect the interference is exiting, please switch off your phone immediately and ask the medical staff timely. 16.2.2 Hearing aids Phones may cause some interference to hearing aids, so please contact the manufacturer immediately if the interference is exited. 16.2.
Note: When make an emergency call, please provide all the important information as accurately as possible. The phone may be the only tool for communication at this point, so please do not end the call without permission. 16.3 Accessing password The password protection for mobile phone and SIM cards are available to prevent they are used illegally. 16.3.1 Password of power-on With this function, you can prevent the phone be used by others without your consent.
the phone normally . Note: If you input false PIN code for 3 times continuously, SIM card will be locked.You must input PUK code to unlock it (If you do not have the PUK code, please contact your network or retail operator to get the PUK code. Please do not input any other invalid content.) 16.3.3 PIN2 PIN2 is the password which used to realize the special features of the SIM card.
16.4 Precautions for Battery Charging The mobile phone uses the ithium-ion battery to provide energy, many tings can affect the time of standby and call time, such as the system environment, phone setup and so on. Please use the standard battery and charger supplied by our company. Damage can be caused if you use the battery or charger which is not approved by our company and our company wil not responsible for the consequences.
When mobile phone is in charging, please do not use the wet hand to contact the battery or charger to avoid dangerous. When your phone is charging, you'd better not use it. After the charging is finished, the battery icon will stop scrolling, and you can disconnect the phone from the interface of the charger adapter. 16.
lifetime of the battery when you charge excessivly. Don't reverse the polatity of the battery between anode and cathode. Do not put the mobile phone at places with high or low temperature; otherwise it may reduce the capacity and the lifetime of the battery. Please use the battery under room temperature as much as possible. Do not make the battery in short circuit, otherwise it will damage the battery core or the internal protection circuit of the battery.
16.6 Caution of Using Accessories Please put all accessories (such as the SIM card, memory card, battery, etc.) out of children's reach to avoid children getting hurt. Before you remove the battery, please make sure turn off the phone and disconnect the connection between the phone and charger. Because the accessories of mobile phone are not waterproof, please keep all the accessories drying. When you cut off the power of any accessories, you should pull the plug properly and don”t pull the power cord.
plastic material will lead poor volatilization of the water vapor, with which can corrupt the inside components of the phone and lead to the oxidation and fade of the shell.