Installation & Assembly

ManualsBrandsZ-Lite ManualsCeiling LightsGuernsey 3 - Light 17.5" Unique/Statement Bowl Semi Flush Mount

SEMI-FLUSH FIXTURE

INSTALLATION INSTRUCTIONS

Please read carefully and save these instructions, as you may need them at a later date.

CAUTION

GENERAL

All electrical connections must be in accordance with local and National Electrical Code (N.E.C.)

standards. If you are unfamiliar with proper electrical wiring connections obtain the services of a

qualified electrician.

Remove the fixture and the mounting package from the box and make sure that no parts are

missing by referencing the illustrations on the installation instructions.

1. OUTLET BOX

2. WHITE WIRE

3. BLACK WIRE

4. GROUND WIRE

5. WIRE CONNECTOR

6. MOUNTING BAR

7. MOUNTING SCREW

8. HEX NUT

9. GROUND WIRE

SCREW

10. BALL NUT

11. CONNECTOR

12. NIPPLE

16. CAP

17. FINIAL

18. GLASS

19. FIXTURE CANOPY

20. MOUNTING SCREW

WARNING: Risk of Fire. Consult a qualified electrician to ensure correct branch circuit

conductor. Min 90ºC supply conductors.

Turn off the main power at the circuit breaker before installing the fixture, in order to prevent

possible shock.

ASSEMBLY AND INSTALLATION

1. Thread the Nipple(12) with Hex Nut to Connector(11).

2. Place the Glass(18)

3. Attach the Cap(16) to the fixture then secure with the Finial(17)

4. Thread two Screw(20) to the Mounting bar(6) and secure with the Hex nut(8).

5. Secure the Mounting bar(6) with Mounting screw(7) to the Outlet box(1).

6. Pull out the outlet wire and ground wire from the Outlet box(1).Make wire

connections

--Ribbed wire(w/o marking) from light to White wire(2) from power source.

--Smooth wire(w/o marking) from light to Black wire(3) from power source.

--Loop the Ground wire(4) to Mounting bar(6) with a Green screw(9)

7.Attach the Fixture canopy(19) against the Outlet box(1),secure with the Ball nut(10)

8.Install bulbs:(bulbs not include)

(Please don’t exceed the maximum capacity that recommended on the sockets).

INSTALLATION IS NOW COMPLETED

Summary of content (1 pages)

PAGE 1
SEMI-FLUSH FIXTURE INSTALLATION INSTRUCTIONS Please read carefully and save these instructions, as you may need them at a later date. CAUTION WARNING: Risk of Fire. Consult a qualified electrician to ensure correct branch circuit conductor. Min 90ºC supply conductors. Turn off the main power at the circuit breaker before installing the fixture, in order to prevent possible shock. GENERAL All electrical connections must be in accordance with local and National Electrical Code (N.E.C.) standards.