Installation Sheet

ASSEMBLY INSTRUCTIONS

562PHBR-LED

MOUNTING POST

WIRE CONNECTOR

POWER SUPPLY WIRE

GROUND WIRE

POST FITTER SCREW

LED MODULE

STEEL PANEL

ONE-SHAPED PANEL

FINIAL(1)

DECORATIVE KNOB(2)

DECORATIVE KNOB(3)

GLASS(4)

SCREW(6)

SCREW(5)

READ & SAVE

INSTALLATION & OPERATION INSTRUCTIONS

TOOLS & MATERIALS REQUIRED

Screwdriver Wire Cutters

Adjustable Wrench Wiring Supplies

CAUTION

Prior to assembly, refer to ELECTRICAL CONNECTIONS section. If you do not have

electrical wiring experience, refer to a do-it-yourself wiring handbook or have your

fixture installed by a qualified licensed electrician.

GENERAL

1. Be sure to read these instructions and review the diagrams thoroughly before

PAGE 1
ASSEMBLY INSTRUCTIONS 562PHBR-LED FINIAL(1) DECORATIVE KNOB(2) DECORATIVE KNOB(3) ONE-SHAPED PANEL STEEL PANEL GLASS(4) SCREW(6) LED MODULE SCREW(5) POST FITTER SCREW GROUND WIRE WIRE CONNECTOR POWER SUPPLY WIRE MOUNTING POST READ & SAVE INSTALLATION & OPERATION INSTRUCTIONS TOOLS & MATERIALS REQUIRED Screwdriver Wire Cutters Adjustable Wrench Wiring Supplies CAUTION Prior to assembly, refer to ELECTRICAL CONNECTIONS section.
PAGE 2
beginning. 2. Electrical connections must be in accordance with local codes, ordinances, or the National Electric Code. If you are unfamiliar with methods of installing electrical wiring, secure the services of a qualified licensed electrician. 3. Before starting the installation, disconnect the power by turning off the circuit breaker or by removing appropriate fuse at fuse box. Turning the power off at the light switch is not sufficient to prevent electrical shock.