Installation Sheet

ASSEMBLY AND INSTALLATION
INSTRUCTIONS FOR ITEM
134SFM/# 135SFM/# 191SFM
NOTE
:
Should any difficulty be experienced, please consult a qualified electrician
before installing.
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT
OFF POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
WARNING :
INSTALLATION STEP:
1. Turn off the electricity at the Fuse or Circuit Breaker before installation.
2. Attach the Cross Bar to the Outlet Box by the 2pcs Mounting Screws upwards.
3. Install Bulbs. (Bulbs are not included, please do not exceed the maximum capacity which is
recommended on the Socket Cover.)
4. Straight the Central Cluster to be vertical and then fixing the Small Screw.
5. Make wire connection with Wire Connectors:
----Connect the black Wire from the light to the Black Wire from the Outlet Box.
----Connect the white Wire from the light to the White Wire from the Outlet Box.
----Attached the Ground Wire and House Ground Wire to the Cross Bar with a Green Screw.
Carefully tuck wires back into the Outlet Box.
6. There is 1PC extra spare Metal Ball Finial inside the package, you can change the Crystal
Ball Finial to be the spare metal piece to your options.
CAUTION: PLEASE DO NOT CHANGE THE BALL NUTS WHEN THE FIXTURE HANING TO THE
CEILING IN CASE THE GLASS FALLING OFF FROM THE FRAME.
7. Raise up the fixture and insert the 2pcs of Short Mounting Screws into the Canopy and tighten
with the Fixing Nuts.
8. Turn on the power at Fuse or Circuit Box and enjoy your new fixture.