Manualshelf

Installation Sheet

ManualsBrandsZ-Lite ManualsCeiling LightsAltadore 10.625-in Bronze Modern/Contemporary Incandescent Semi-flush Mount Light
1
ASSEMBLY AND INSTALLATION
INSTRUCTIONS FOR ITEM
#180SF #181SF#182SF
NOTE
: Should any difficulty be experienced, please consult a qualified electrician
before installing.
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT
OFF POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
WARNING
:
INSTALLATION STEP:
1. Turn off the electricity at the Fuse or Circuit Breaker before installation.
2. Attach the Cross Bar to the Outlet Box by the 2pcs Mounting Screws upwards.
3. Install Bulbs. (Bulbs are not included, please do not exceed the maximum capacity
which is recommended on the Bobeche.)
4. Carefully install the Glass into the Sockets.
5. Straight the Central Cluster to be vertical and then fixing the Small Screw.
6. Make wire connection with Wire Connectors:
----Connect the black Wire from the light to the Black Wire from the Outlet Box.
----Connect the white Wire from the light to the White Wire from the Outlet Box.
----Attached the Ground Wire and House Ground Wire to the Cross Bar with a Green Screw.
Carefully tuck wires back into the Outlet Box.
7. Raise up the fixture and insert the 2pcs of Short Mounting Screws into the Canopy and tighten
with the Fixing Nuts.
8. Turn on the power at Fuse or Circuit Box and enjoy your new fixture.

Summary of content (1 pages)