IEEE 802.11b/g WLAN USB 2.0 Dongle Brand Name：ZCOM Model Name：XG-762N Date of Issue: Nov.
Technical Support The firmware version of the IEEE 802.11g Wireless LAN USB Adapter is displayed on the utility About window. Users could download the most recent software version from the supplier’s web site or refer to the selling contact for the latest software information. If you have difficulty solving the problem while installing or using the IEEE 802.11g Wireless LAN USB Adapter, please contact the supplier for support. About This Manual IEEE 802.
FCC Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received; including interference that may cause undesired operation. For product available in the USA market, only channel 1~11 can be operated. Selection of other channels is not possible.
Table of Contents FCC Information ............................................................................................................2 Chapter1 About 802.11g Wireless LAN USB Adapter...............................................................1 1-1 Features and Benefits................................................................................... 1 1-2 Applications.................................................................................................. 2 1-3 Product Kit ...........
Chapter1 About 802.11g Wireless LAN USB Adapter The IEEE 802.11g Wireless LAN USB Adapter is a standard USB adapter that fits into any standard USB 2.0 and 1.1 slots in a notebook computer. Its 54Mbps data rate gives equivalent Ethernet speed to access corporate network or the Internet in a wireless environment. When installed, IEEE 802.11g Wireless LAN USB Adapter is able to communicate with any 802.11/b and 802.11g compliant products. 1-1 Features and Benefits 1. Fully IEEE 802.11g compatible. 2.
1-2 Applications The IEEE 802.11g Wireless LAN USB Adapter offers a fast, reliable, cost-effective solution for wireless client access to the network in applications like these: 1. Remote access to corporate network information E-mail, file transfer and terminal emulation. 2. Difficult-to-wire environments Historical or old buildings, asbestos installations, and open area where wiring is difficult to deploy. 3.
1-3 Product Kit The IEEE 802.11g Wireless LAN USB Adapter comes with the following items. Please go through each item below. If any of listed items appears to be damaged or missing, please contact your local dealer. IEEE 802.11g Wireless LAN USB Adapter IEEE 802.11g Wireless LAN USB Adapter………………….…………………….….… x 1 USB Cable…………………………………………………………………………..…… x1 USB Adapter Software and Documentation CD…………………………..……..…..….. x 1 USB Adapter Manual………….……..…………………..…………………………….….x 1 1-4 About IEEE 802.
Chapter 2 Getting Started This chapter describes the instructions that guide you through the proper installation of your IEEE 802.11g Wireless LAN USB Adapter for the Windows XP/2000/ME/98SE operating systems. The complete installation of the IEEE 802.11g Wireless LAN USB Adapter consists of the following steps: STEP 1: Insert your IEEE 802.11g Wireless LAN USB Adapter into your notebook. STEP 2: Install the corresponding driver and utility. STEP 3: Set basic settings. STEP 4: Finish Installation.
Chapter 3 Install Driver for Windows This section describes the installation of the IEEE 802.11g Wireless LAN USB Adapter driver for the Windows 98SE/ME/2000 and Windows XP operating systems. The installation procedures for Windows XP refer to 3-1 Set up IEEE 802.11g Wireless LAN USB Adapter for Windows XP; for Windows 2000 please see 3-2 Set up IEEE 802.11g Wireless LAN USB Adapter for Windows 2000; for Windows 98SE/ME refer to 3-3 Set up IEEE 802.11g Wireless LAN USB Adapter for Windows 98SE/ME.
Step 2: Insert the Product CD-ROM into the CD-ROM drive. Check the “Search removable media (floppy, CD-ROM…)” check box and click on Next to install the driver. Step 3: The windows will appear the message about the Network Control has not passed Windows Logo testing to verify its compatibility with Windows XP.
Step 4: The windows will find “NB 802.11g Wireless LAN USB Adapter(1211B)” and start copying corresponding files into the system. Click on Next to continue. Step 5: Click Finish to complete the installation.
Step 6: Right click “My Computer”, select Properties, go to the Hardware tab and click the Device Manager button to see if any exclamation mark appears next to the Network Adapter/NB 802.11g Wireless LAN USB Adapter(1211B). If no, your IEEE 802.11g Wireless LAN USB Adapter is working well. Check if there is exclamation mark next to the Wireless LAN USB Adapter After installing the IEEE 802.11g Wireless LAN USB Adapter, the Windows XP will display a “Wireless Network Connection # ” message.
Click on the message and the “Connect to Wireless Network” window will then appear automatically. You may click on Connect button to allow users to connect to an available wireless infrastructure network (Access Point). You may also click the Advanced… button to make advanced configuration for the Wireless LAN USB Adapter, shown as below.
For more information on using the automatic wireless network configuration please refer to Windows XP Help file. Warning: You must choose one way to configure Wireless LAN USB Adapter either of using our WLAN Utility by un-checking this check box or using Windows XP Aut omat ic Wireless Net work Configurat ion first by checking this check box. However, the WLAN Utility, which comes with the IEEE 802.11g Wireless LAN USB Adapter, provides you more tools to configure the IEEE 802.
3-2 Set up IEEE 802.11g Wireless LAN USB Adapter for Windows 2000 Step 1: After inserting the IEEE 802.11g Wireless LAN USB Adapter into the USB slot on your computer, Windows will auto-detect the IEEE 802.11g Wireless LAN USB Adapter. Step 2: A “Found New Hardware Wizard” window shows up. Click Next to proceed.
Step 3: Select “Search for a suitable driver for my device (recommended)” and click on Next to continue. Step 4: Insert the Product CD-ROM into the CD-ROM drive. Specify the location where the driver is placed. Click on Next to install the driver.
Step 5: The windows will find “USB2.0 Device”. Click on Next to continue. Step 6: The windows will appear the message about the Microsoft digital signature affirms that software has not been tested with Windows and that the software has not been altered since it was tested. Click on Yes button to continue installing.
Step 7: Click Finish to complete the installation. Step 8: Right click “My Computer”, select Properties, go to the Hardware tab and click the Device Manager button to see if any exclamation mark appears next to the Network Adapter/NB 802.11g Wireless LAN USB Adapter(1211B). If no, your IEEE 802.11g Wireless LAN USB Adapter is working well.
3-3 Set up IEEE 802.11g Wireless LAN USB Adapter for Windows 98SE/ ME Step 1: After inserting the IEEE 802.11g Wireless LAN USB Adapter into the USB slot on your computer, Windows will auto-detect new hardware and will display an “Add New Hardware Wizard” window. Click Next to continue. Step 2: Select “Search for the best driver for your device (Recommended)” and click Next to proceed.
Step 3: Insert the Product CD-ROM into the CD-ROM drive. Select the “CD-ROM drive” check box and click on Next to install the driver. Step 4: The Windows will find “NB 802.11g Wireless LAN USB Adapter(1211B)”. Click Next to continue.
Step 5: Once the [Please insert the disk labeled “Windows 98 Second Edition CD-ROM”, and then click OK] window appears, enter the path corresponding to the appropriate driver and click OK. Usually these files can be found at C:\Windows or C:\Windows\system. Step 6: Click Finish to complete the software installation. Step 7: Restart the computer.
Step 8: Open Control Panel/System/Device Manager, and check Network Adapters to see if exclamation mark appears next to the NB 802.11g Wireless LAN USB Adapter(1211B). If no, your IEEE 802.11g Wireless LAN USB Adapter is working well.
Chapter 4 Configure the IEEE 802.11g Wireless LAN USB Adapter This chapter gives you assistance with detailed configuration for the IEEE 802.11g Wireless LAN USB Adapter under Windows XP/2000/98SE/ME. 4-1 Install the WLAN Utility To install the WLAN Utility, follow these steps: Step 1: Insert the Product CD-ROM. Step 2: Go to the utility folder and run setup.exe. Step 3: The InstallShield Wizard will show up and run the Setup Utility. Step 4: Click Next to continue.
Step 5: If you’ve installed drivers already, unclick Driver Files to continue. If you have not install Driver, click Driver Files to pre-install. The system would auto-install Drivers while you insert your wireless network card into USB slot on your PC. Since software has not been tested with Windows to verify its compatibility, the digital warning message will pop up and just follow the on-screen instructions to go through all installations.
Step 6: Choose Destination Location and click Next to continue. Step 7: Select a program folder and click Next.
Step 8: You may add a shortcut in the startup folder as desired and click Next. Step 9: Click on Finish to complete the installation.
Upon completion, go to Program Files and run the WLAN Utility and its icon will appear in the System Tray in the bottom right corner of your task bar. Clicking on the icon will open the configuration window. When you minimize the window, the system tray icon will be loaded in the System Tray again. The color behind the system tray icon indicates the link status: Blue indicates a good or excellent link. Yellow indicates a usable but weak link. Red indicates no or very poor link quality.
4-2 Use the WLAN Utility The WLAN Utility enables you to make configuration changes and perform user-level diagnostics on your IEEE 802.11g Wireless LAN USB Adapter in the Windows XP/2000/98SE/ME operating system environments. The WLAN Utility consists of window with 3 items for you to monitor and configure the IEEE 802.11g Wireless LAN USB Adapter: Configuration, Site Survey, and About. Configuration: The Configuration item allows you to modify the configuration parameters for the IEEE 802.
Profile The Profile field allows you to set values for all parameters by selecting a previously defined profile. To create the profile, go to the Profile field, type a profile name and set the corresponding parameters. If one of the profiles is no longer used, you may remove it by clicking the Delete button. After changing parameters, save the profile and click the Apply button to take effect. You can have multiple profiles and modify the profile at any time.
Security Enable To protect against hacker entering your system and prevent unauthorized wireless station from accessing data transmitted over the network, the WLAN Utility offers a sophisticated security algorithm. To activate security enable, click the check box next to Security Enable. A Privacy Configuration window will then appear.
Privacy Configuration consists of specifying Security and Certification, as explained in the following: Security Tab In order to join a network, networks may require an encryption key for association. You must configure the Authentication Mode and Encryption Mode for your keys in the Privacy section of this menu. For Authentication Mode: Open: Requires NO authentication, since it allows any device to join a network without performing any security check.
WPA-PSK: Allows you to gain access to a secured wireless network that the station and the access point use the same pre-shared key to authenticate. You must type a mixture of numbers and letters in the Pre-shared key [WPA] section of this menu. You may input either 8-63 ASCII characters or 64 HEX characters. Pre-shared key is usually used for SOHO authentication.
WPA: Allows you to gain access to a more secured wireless network that requires mutual authentication between client and access point with a Radius authentication server. This product supports various EAP types, which require different credential authentication. In order to access the wireless network, you must select EAP type your service provider supplied in the section of IEEE802.11X Authentication.
WPA2-PSK: Like WPA, WPA2-Personal offers authentication via a pre-shared key. Pre-shared key is usually used for Personal authentication. Personal mode requires only an access point and client on the network. Similarly, you need to type a mixture of numbers and letters in the Pre-shared key [WPA] section of this menu. You may input either 8-63 ASCII characters or 64 HEX characters. Choose WPA2-PSK if needed from Authentication Mode.
WPA2: WPA2 provides a stronger encryption mechanism than WPA. WPA2 is the second generation of WPA security, providing personal and enterprise users with a high level of assurance that only authorized users can access to their wireless network. There is no difference between WPA and WPA2. The only difference is that WPA2 provides a stronger data encryption via the AES, contrast to WPA, which uses Temporal Key Integrity Protocol (TKIP). Choose WPA2 if needed from Authentication Mode.
Once you choose your Authentication Mode, you then need to select the Encryption Mode. For Encryption Mode WEP: Specify the encryption keys. There are two methods to set the WEP keys, as described below: Key will be generated automatically for data private To create encryption keys automatically, click the Key will be generated automatically for data private check box. Note: This function is used in IEEE802.1X Authentication mode. Keys are dynamically generated and distributed by the authentication server.
Pre-configured key [WEP] You can also create encryption keys manually by pulling down the Key Length menu and select either 64bit or 128bit encryption method in the Pre-configured key section of this menu. For 64bit encryption you may choose: Alphanumeric: entering 5 characters (case sensitive) ranging from “a-z”, “A-Z” and “0-9” (e.g. MyKey). Hexadecimal: entering 10 hexadecimal digits in the range of “A-F”, “a-f” and “0-9” (e.g. 11AA22BB33, showed as below).
Certification Tab After you select the EAP type, you need to click Certification Tab to make advanced setting. The following describes configuration of each available EAP type. TLS: Clicking the Certification tab for TLS shows the following menu. Figure 4.1 Figure 4.2 TLS requires the entry of Certificate Information and Login Information for mutual authentication. This utility will auto-detect the Certificate Information and Server Name for you to configure TLS easily.
PEAP: Clicking the Certification tab for PEAP displays the following menu. Figure 4.3 Figure 4.4 PEAP requires the use of Certificate Authority, User Information and Login Information. This utility will automatically identify Certificate Authority and Login Information for users to configure PEAP easily. You only need to enter User Name and Password in the User information filed to authenticate (Figure 4.3).
LEAP: Clicking the Certification tab for LEAP shows the following menu. LEAP requires the mutual authentication between station and access points. You must present a User Name and Password in the User Information field that will be verified by LEAP-capable server such as Cisco Access Point. This mutual authentication ensures that only authorized users are allowed access to the network. To save the information you entered in the appropriate field, click the OK button.
TTLS: Clicking the Certification tab for LEAP shows the following menu. TTLS contains PAP, CHAP, MSCHAP, and MSCHAPv2. Choose one of four types to do the certification. While you use PAP, MSCHAP or MSCHAPv2, the certificate server must be Funk server. However CHAP supports all the servers except of funk server.
Figure 4.5 Figure 4.6 TTLS requires the use of Certificate Authority, User Information and Login Information. This utility will automatically identify Certificate Authority and Login Information for users to configure TTLS easily. You only need to enter User Name and Password in the User information filed to authenticate (Figure 4.5). You also can set TTLS manually by clicking the check box next to “Verify Certificate Authority” and highlight one of certificate authority to select it.
Advance The WLAN Utility also offers the advanced configuration for user to set the IEEE 802.11g Wireless LAN USB Adapter under certain network environment. These advanced options include Power Save Enabled, RTS Threshold, Fragmentation Threshold and Nitro Time. To enable the advanced configuration, go to the Configuration tab and click the Advance button. Power Save Enabled The Power Save option is designed to conserve battery life of you computer. When Power Save is enabled, your IEEE 802.
Status: The Status field on the Configuration menu provides the following information. State: When operating in Infrastructure mode, this field shows the MAC address of the Access Point with which the IEEE 802.11g Wireless LAN USB Adapter is communicating. When operating in Ad-Hoc mode, it shows the virtual MAC address used by computers participating in the Ad-Hoc network. Current Channel: Shows the channel on which the connection is made.
Site Survey: By clicking the Rescan button, the AP Browser can display Access Points around the working environment. Besides showing the ESSID of each Access Point, it also displays BSSID, Channel, Capability, Signal, and Rates. To join any of the displayed Access Points, highlight the Access Point you desire to connect and then click the Join button to associate to the AP. About: The About item shows the versions of the Wireless LAN Utility, and driver, firmware of the IEEE 802.
Specification Product Description IEEE 802.11b/g WLAN USB 2.0 Dongle Lead-Free RoHs compliant Host Interface USB 2.0 Operating Voltage DC 5V ± 5% Chipset Mac/BB ZyDAS 1211B Processor RF Chip Airoha AL2330 Power Consumption 11b TX: ≦ 380mA RX: ≦ 200 mA 11g TX: ≦ 380 mA RX: ≦ 200 mA Radio Antenna PCB Antenna Antenna Gain 1.64 dBi(Peak) Output Power IEEE 802.11b: + 2.5dB 19.18dBm @ 1/2/5.5/11Mbps IEEE 802.11g: + 2.5dB 22.36dBm @ 54Mbps 22.36dBm @ 48 Mbps 22.36dBm @24/36Mbps 22.36dBm @6/9/12/18Mbps IEEE 802.
Range Coverage IEEE 802.11b IEEE 802.11g ♦ ♦ ♦ ♦ ♦ 54Mbps:≧ 60 meter 48Mbps:≧70 meter 36Mbps:≧80 meter 24/18Mbps:≧ 120 meter 12/9/6Mbps:≧120 meter ♦ ♦ ♦ ♦ 11Mbps:≧80 meter 5.5Mbps:≧120 meter 2Mbps:≧150 meter 1Mbps:≧200 meter Operating Frequency IEEE 802.11b/g ISM Band ♦ USA(FCC): 2.412GHz ~ 2.462 GHz (CH1 ~ CH11) ♦ Europe(ETSI): 2.412 GHz ~ 2.472 GHz (CH1 ~ CH13) ♦ Japan(TELEC) : 11b:/g : 2.412 GHz ~ 2..
Limited Warranty This Warranty constitutes the sole and exclusive remedy of any buyer or reseller’s equipment and the sole and exclusive liability of the supplier in connection with the products and is in lieu of all other warranties, express, implied or statutory, including, but not limited to, any implied warranty of merchantability of fitness for a particular use and all other obligations or liabilities of the supplier.
Please complete the information below and include it along with your products. Name: Title: Company: Telephone: Fax: Email: City/State/Zipcode: Country: Product Name: Serial Number: MAC Address: Invoice Date: Product Description: If you have any further questions, please contact your local authorized reseller for support.
