User's Manual

1
11Mbps Wireless LAN USB Adapter
Quick Installation Guide
Version 1.0.0
Network Configuration
11Mbps Wireless USB Adapter provides you the easiest, fastest, way to access your wireless and
wired network. The Wireless USB Adapter utilizes the latest advancement of PC industry – USB
technology, which allows you to install and use the card reader easier than ever before.
11Mbps Wireless USB Adapter can be operated in Ad-Hoc and Infrastructure network
configurations. Ad-Hoc mode allows wireless stations to join a Basic Service Set (i.e., peer-to-
peer mode, without access point). Infrastructure mode allows wireless clients to join an Extended
Basic Service Set (i.e., connect to access point)
Package Content
11Mbps Wireless USB Adapter x 1 Software Floppy Disk x 1
Quick Installation Guide x 1
11Mbpsp Wireless USB Adapter Installation under Windows 98/Windows 2000
1. Connect the 11Mbps Wireless USB Adapter to the USB port on your computer. The PC will
auto-detect the Wireless USB Adapter and a Found New Hardware Wizard windows shows up.
2. Click on Next and insert the software floppy disk into the floppy drive. Specify the location
where the driver is placed then click on Next to continue.
3. The PC will find the corresponding driver. Follow the on-screen instructions to install the
11Mbps Wireless USB Adapter.
4. Click Finish to complete the installation. Proceed to the next section to install the Wireless
LAN utility for the Wireless LAN USB Adapter.
Infrastructure Network
Ad-hoc Network
Wired Network
Wireless Network
Access Point

Summary of content (6 pages)