OEM Installation Guide AG-622
1. Introduction 54Mbps IEEE802.11a/b/g Wireless Network Mini PCI Adapter is the perfect solution for your wireless network applications based on the IEEE 802.11a/b/g standard offering a data rate of 54Mbps in a wireless LAN environment. AG-622 is designed for PC, Access Point, Router, ATUR, Printer Server series, IP Camera series and Internet Video Server gives you wireless access the web and network resource without the wire.
11b mode; 11, 5.5, 2, 1 Mbps Turbo mode: 108, 96, 72, 48, 36, 24, 18, 12 Mbps Power Consuption 11a/11g: Tx: 850mA; Rx: 450mA (max) 11b: Tx: 700mA; Rx: 400mA (max) PHYSICAL SPECIFICATIONS Dimensions 59.60mm(L)*44.45mm(W)*3.30mm(H) Weight <20g ENVIRONMENTAL SPECIFICATIONS Operating Storage Temperature (Ambient) 0~55℃ Humidity (non-condensing) 90﹪ -20~65℃ 5~95﹪ 4. Hardware Installation The following sections in this chapter describe how to install AG-622 Module 4.1.
λ Remove the AG-622 module from its protective packaging. λ Avoiding Electrostatic Discharge Before you install the AG-622 module, ground yourself by touching a piece of metal to avoid electrostatic discharge (ESD). You should also take the following precautions to prevent damage to the AG-622 module: λ Keep the AG-622 module in its antistatic-shielded bag until you are ready to install it. λ Handle the AG-622 module by its edges. λ Ensure the connector is connected to above Model’s board tightly.
FCC Statements: 1. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 2. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. 3.