User's Manual

ManualsBrandsZ Com ManualsElectronicsA WIRELESS LAN CARD

11Mbps Wireless LAN Compact Flash Adapter

Quick Installation Guide Version 1.0.0

Network Configuration

The 11Mbps Wireless Compact Flash Adapter provides you an easy and fast way to access your

wireless and wired network. The Wireless Compact Flash Adapter, which utilizes the latest

advancement of PC industry – Compact Flash technology, allows you to install and use the card

reader easier than ever before.

The 11Mbps Wireless Compact Flash Adapter can be operated in Ad-Hoc and Infrastructure

network configurations. Ad-Hoc mode allows wireless stations to join a Basic Service Set (i.e.,

peer-to-peer mode, without access point). Infrastructure mode allows wireless clients to join an

Extended Basic Service Set (i.e., connect to access point)

Package Content

11Mbps Wireless Compact Flash Adapter x 1 Software Floppy Disk x 1

Quick Installation Guide x 1

11Mbpsp Wireless Compact Flash Adapter Installation under CE 3.0

1. Run the “Setup.exe” utility.

2. Connect the 11Mbps Wireless Compact Flash Adapter to your PDA. The PDA will auto-detect

the Wireless Compact Flash Adapter and an “Unrecognized Card” windows shows up to prompt

you to enter the driver name. Enter “wlan11” and click OK to continue.

3. Assign an IP address to your Wireless Compact Flash Adapter. You may choose to give a fixed

IP address or have the Wireless Compact Flash automatically obtain an IP address from your

DHCP server.

Infrastructure Network

Ad-hoc Network

Wired Network

Wireless Network

Access Point

Summary of content (6 pages)

PAGE 1
1Mbps Wireless LAN Compact Flash Adapter Quick Installation Guide Version 1.0.0 Network Configuration The 11Mbps Wireless Compact Flash Adapter provides you an easy and fast way to access your wireless and wired network. The Wireless Compact Flash Adapter, which utilizes the latest advancement of PC industry – Compact Flash technology, allows you to install and use the card reader easier than ever before.
PAGE 2
Use of Wireless LAN Utility The 11Mbps Wireless LAN Utility provides the following items for you to configure the 11Mbps Wireless Compact Flash Adapter. To run the utility, go to StartàSettings. Go to the System tab, and click the “Wireless LAN Settings” icon. The utility interface will then appear and configuration can be made.
PAGE 3
Link: Similar to Ping Command, this tool allows you to point-to-point data transmission quality between two stations. By entering IP address of another station and set the timeout and packet size you may know whether the communication has been made successfully or not.
PAGE 4
Wep The encryption function enables you to encrypt and decrypt your wireless data, making your data more secure. To enable the WEP encryption, select the “Enable” check box, select the Key Length, either 64 bit or 128 bit, and enter the WEP Keys in the Key field. For 40-Bits encryption the key values are 10 digit hexadecimal values in the range of “A-F” and “0-9”, preceded by the characters “0x” values (e.g. 11AA22BB33).
PAGE 5
FCC Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received; including interference that may cause undesired operation. Federal Communications Commission (FCC) Statement This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.
PAGE 6
The Wireless Compact Flash Adapter Specifications ! " # $% & '" ( & &)& *& +,- # % & &)& . +,- # / % & &)& 0& +,- # " $% & 10)& *& +,- # % & 10)& 0& +,- # % 2 34 *5 6 5 #$ 7 % 1 134 *1* 6 &55 &34 ..