User Manual

ManualsBrandsZ Com ManualsElectronicsMini PCI Wireless LAN Card

11Mbps MiniPCI Wireless Adapter

Quick Installation Guide

Version 1.0.0

I. Network Configuration

The 11Mbps MiniPCI Wireless Adapter is an IEEE802.11/802.11b-compliant PCI Type DSSS

wireless LAN adapter. It fully supports wireless networking under Windows XP/2000/98/ME.

 The 11Mbps MiniPCI Wireless Adapter can be operated in Infrastructure and Ad-Hoc network

configurations. Infrastructure mode allows 11Mbps MiniPCI Wireless Adapter users to join

an Extended Basic Service Set (i.e., connect to access point). Ad-Hoc mode allows 11Mbps

MiniPCI Wireless Adapter users to join a Basic Service Set (i.e., peer-to-peer mode, without

access point).

II. Package Content

The 11Mbps MiniPCI Wireless Adapter x 1

Quick Installation Guide x 1

Product CD-ROM or Floppy Diskette x 1

III. Installation of the 11Mbps MiniPCI Wireless Adapter under Windows XP

1. Insert the 11Mbps MiniPCI Wireless Adapter into the MiniPCI slot in your notebook and start

Windows. Windows will auto-detect the MiniPCI Wireless Adapter and a “Found New

Hardware Wizard” window will show up.

2. Select “Install from a list or specific (Advanced)” and insert the Product CD-ROM or

floppy disk into the appropriate drive. Specify the location where the driver is placed.

Click on Next to install the driver.

3. The windows will find “ MiniPCI Wireless Adapter”. Click on Next to continue.

4. Click Finish to complete the installation.

Infrastructure

d-hoc

Wired

Wireless

ccess Point

Summary of content (8 pages)

PAGE 1
1Mbps MiniPCI Wireless Adapter Quick Installation Guide I. Version 1.0.0 Network Configuration The 11Mbps MiniPCI Wireless Adapter is an IEEE802.11/802.11b-compliant PCI Type DSSS wireless LAN adapter. It fully supports wireless networking under Windows XP/2000/98/ME. The 11Mbps MiniPCI Wireless Adapter can be operated in Infrastructure and Ad-Hoc network configurations. Infrastructure mode allows 11Mbps MiniPCI Wireless Adapter users to join an Extended Basic Service Set (i.e., connect to access point).
PAGE 2
Installation of the 11Mbps MiniPCI Wireless Adapter under Windows 2000 1. Insert the 11Mbps MiniPCI Wireless Adapter into the MiniPCI slot in your notebook and start Windows. Windows will auto-detect the MiniPCI Wireless Adapter and a “Found New Hardware Wizard” window will show up. Click Next to proceed. 2. Select “Search for a suitable driver for my device (recommended)”. Insert the Product CD-ROM or floppy disk into the appropriate drive. Specify the location where the driver is placed.
PAGE 3
Configuration: The Configuration item allows you to modify the configuration parameters for the 11Mbps MiniPCI Wireless Adapter such as Profile, Network Type, Channel, Transmit Rate, ESSID, WEP, RTS/CTS, Fragment Threshold, and Power Save mode. Furthermore, you may monitor the current status of the MiniPCI Wireless Adapter such as State, Current Channel, Current Tx Rate, Throughput, Link Quality and Signal Strength.
PAGE 4
AP Browser: By clicking the Rescan button, the AP Browser can display all the Access Points around working environment. Besides showing the ESSID of each Access Point, it also display BSSID, Channel, Signal, Quality and Supported Rates. To join any of the displayed Access Point, highlight the Access Point you desire to connect and then click the Join BSS or Join ESS to join the group. Site Survey: When the Site Survey screen is displayed, the channel quality of all 14 radio channels will be displayed.
PAGE 5
About: The About item shows the versions the Wireless LAN Utility, driver, firmware and utility of the 11Mbps MiniPCI Wireless Adapter. Also, the MAC address and frequency domain is displayed. Technical Support You can find the most recent software and user documentation will be updated periodically on the supplier Web site. If you have difficulty resolving the problem while installing or using the 11Mbps MiniPCI Wireless Adapter, please contact the supplier for support.
PAGE 6
Statements Need to be Shown on End Product Since this module is installed inside the end product, the end product should be affixed a label on visible area showing that this product contains a RF module, and also its FCC ID. FCC Information To assure continued compliance, (example – use only shielded interface cables when connecting to computer or peripheral devices).
PAGE 7
Limited Warranty Statement This Warranty constitutes the sole and exclusive remedy of any buyer or reseller’s equipment and the sole and exclusive liability of the supplier in connection with the products and is in lieu of all other warranties, express, implied or statutory, including, but not limited to, any implied warranty of merchantability of fitness for a particular use and all other obligations or liabilities of the supplier.
PAGE 8
Please complete the information below and include it along with your products. Name: Title: Company: Telephone: Fax: Email: City/State/Zipcode: Country: Product Name: Serial Number: MAC Address: Invoice Date: Product Description: If you have any further questions, please contact your local authorized reseller for support.