User Manual

Z-Com, Inc.
1
7F-2, 9, Prosperity 1st Rd.,
Science-Based Industrial Park, Hsinchu, Taiwan
Tel: [phone] Fax: [phone]
Website: http:/// www.zcom.com.tw
Email: info@ zcom.com.tw
XI-325/B Quick Installation Guide
I. Network Configuration
XI-325/B is an IEEE802.11/802.11b-compliant PCMCIA Type II DSSS wireless LAN PC card.
It fully supports wireless networking under Windows 95/98, and NT 4.0.
 XI-325/B can be operated in Ad-Hoc and Infrastructure network configurations. Ad-Hoc mode
allows XI-325/B users to join an Basic Service Set (i.e., peer-to-peer mode, without access point).
Infrastructure mode allows XI-325/B users to join a Extended Basic Service Set (i.e., connect to
access point)
II. Package Content
XI-325/B 11Mb PC x 1 CD-ROM or Driver and Utility Disk x 1
XI-325/B Detachable Antenna x 1 Quick Installation Guide x 1
III. XI-325/B and Utility Installation under Windows 95/98
1. Insert XI-325/B into the PCMCIA slot, then start Windows. Windows will auto-detect new
hardware and Windows Wizard will display “New Hardware Found”
2. Click on ‘Next’, then insert the corresponding driver and utility CD-ROM into the CD-ROM
drive, or the driver and utility disk into the floppy drive. Click on ‘Next’.
3. Once [Insert Win 95/98 CD-Rom into the appropriate drive, then click ‘OK’] window
appears, please follow by either inserting the Win 95/98 CD-Rom or finding the Win 95/98
source path within the appropriate drives, then click ‘OK’.
4. Click ‘Finish’ to complete the installation. Restart Win 95/98.
5. To install the XI-325/B Utility, insert the XI-325/B driver and utility disk once again, then
execute A: setup.exe.
6. Follow the on-screen instructions to complete utility installation, then afterward double-click on
Infrastructure Network
Ad-hoc Network
Wired Network
Wireless Network
A
ccess Point