Product Description

Timing function: When the white noise is turned on, press and hold
the button for about 1.5S to turn on the timing function.The
timer “ ” icon on the display lights up, and the “OH” icon on the screen
flashes. Rotate the knob to select the timer time.After selected, the time
flashes three times and the default setting is completed
Product name： Functional base
Dimension： 218×218×37mm
Product weight： 310g
Rated input：DC5V 3A/DC 9V 2A
power：15W(MAX)
Product standard: GB/T 37687-2019
W1 multifunctional base
The W1 multi-functional base is a multi-functional wireless charger, which uses
the Type-C interface to charge itself; it has the function of white noise, which can
play a role in assisting sleep; it can be used with small household appliances such
as small fans and pat lights. The charging bases on both sides charge external
products; simple appearance design, multi-functional and easy to operate,
suitable for home and office scenes.
After connecting to the power supply, the power indicator lights up, and
all the icons on the display flash three times and then go out
Mobile phone charging function: in standby state, place the mobile
phone in the designated charging area on the panel to charge the
mobile phone
White noise function: in standby mode, double-click the button to turn
on the white noise function, the icon “ ” on the display will light up,
click to switch to the next song; turn the knob clockwise to increase the
volume, and counterclockwise to decrease the volume; double-click the
button to turn off the music function , the “ ” icon on the display goes
out.
Charging stand L
Mobile phone
charging area
Display/switchbutton
Charging stand R
Power Indicator
Schematic diagram
of display icon
Product description
Product parameter
Function key operation instructions
Stylus charging function: in standby state, put the device on the
multi-function base to charge the device, the icon “ ” flashes when
it is placed on the left, the icon “ ” flashes when it is placed on the right,
and the icon is always on when fully charged
Standard Accessories
Wireless charging×1、data cable×1、manual×1
Precautions
1. It is strictly forbidden to throw this product into fire, or discard it at will.
2. It is strictly forbidden to put this product in water or other liquids, as
water may catch fire and spontaneously ignite.
3. It is strictly forbidden to put anything between the wireless charging
transmitter board and the mobile phone being charged.
4. In the charging state, do not put anything between the stylus charging
base and the external device.
5. When cleaning this product, please do not rinse directly under the tap to
avoid short circuit of the product. It is recommended to wipe the surface of
the product with a soft cotton cloth.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy, and if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device
can be used in portable exposure condition without restriction.