User's Manual

Thank you for purchasing the Ocean Waves Projector Nigt Light. Sit back
and watch an extraordinary light show featuring multiple colors and
modes while enjoying the soothing sounds of built-in sounds of nature,
or your own recordings via a Bluetooth
®
connecton, or with music from
your TF Card.
1. Touch and hold the Start button (see STEP 4). This will start the unit
and automatically turn on the first lighting eect and sound track.
2. Tap the Start button sequentially to cycle through the 7 dierent
built-in lighting eects and 4 sound tracks.
3. Press the
▲
▲
| button to advance to the next sound.
4. Press the |
▲ ▲
button to go back to the previous sound.
5. Press
+ to increase volume and press – to decrease volume.
6. The built-in sound eects will shut o when you pair with a
Bluetooth® device or by using a TF card (not included).
7. Control your external audio from your selected device or from the
remote control.*
8. Touch and hold the Start button to shut down.
1. Press the Power button to start the unit. This will automatically turn on
the first lighting eect and sound track.
REMEMBER: The unit must be plugged into a USB power source
and the bottom switch turned ON.
2. Press the Light Mode button sequentially to cycle through the 7 dierent
built-in lighting eects and the 8th to turn lights o.
3. To experience the lights in motion, or stop lights from moving,
press the button.
3. Press the
▲
▲
| button to advance through the 4 sound eects. Press the
|
▲ ▲
button to go to previous sound. Press
▲
|| to pause sound eect.
4. Press VOL+ or VOL– for gradual volume control
6. To set the auto timer for the lights, press 1H/2H/4H on the remote.
7. Press the button, to cancel the timer.
8. Press and hold the Power button to shut down.
P
ARTS AND FEATURES
OPERATING INSTRUCTIONS FROM THE BASE UNIT REMOTE CONTROL OPERATING INSTRUCTIONSSETUP INSTRUCTIONS
4 SOOTHING SOUND EFFECTS
1. Forest environment
2. Ocean waves and gulls
3. Babbling brook and birds
4. Sounds of nature
SPECIFICATIONS
Rated volt/current: DC5V/1A
Rated power: 2W
Speaker: 4Ω/3W
Respond frequency: 160Hz-20KHz
Motor specification: 5V/13 circle
Product material: ABS/PC/Metal/
Electronic components
USB cable length: 2 ft
CAUTION
This is not a toy. Adult supervision is recommended.
Always place unit on a hard, level surface.
Keep away from high heat and humidity when storing.
7 COLOR-CHANGING LIGHT MODES:
• Romantic Atmosphere
• Colorful
• Purple Atmosphere
• Ocean
• Aurora Borealis
• Magic Zone
• Disco Eect
• 7 colorful lights and
rotating mode
• 12 bright led beads
• Smart touch sensor keys
• Remote control
• Adjustable base angle
• Built-in music and speaker
• Bluetooth
®
connectivity
• TF card slot
• 1Hr/2Hr/4Hr auto o timer
Connect the included
MicroUSB/USB power cord
to any USB power source
such as your computer or
USB wall plug adapter (not
included).*
STEP 1
Turn over projector and slide
switch to ON.
STEP 2
STEP 4
STEP 3
Press the Power sensor
button to turn on lights and
music. You can also turn on
the unit using the remote
control. Press and hold for
2 seconds to turn o unit.
Open remote back and
insert 2 AAA batteries using
correct polarity.
Power/Light modes (7)
Rotation Motor ON/OFF
Light Mode (7)
Power ON/OFF
Previous Song
Pause
Decrease Volume
Time=1 Hr
Time=2 Hrs
Time=4 Hrs
Next Song
Increase Volume
Timer OFF
Aim the remote control towards the Control Receiver on the
front of the unit. Remote can work up to 20 ft away.
USER MANUAL
collectivegoods.com
Ocean Waves
PROJECTOR NIGHT LIGHT
HOW TO CONNECT (PAIR) WITH ANY BLUETOOTH®-READY DEVICE
1. Press and hold the Power button until you hear a voice indicating the
Bluetooth® speaker is ready to pair with your device.
2. Go to the Bluetooth® setting on your smartphone or device, and search
and select Bluetooth® “Ocean Wave BT”. An audible voice will indicate
that you have paired successfully.
*3. You can control your music volume, next track, previous track and
pause/play with the remote control.
AUDIO CONNECTION OPTIONS
Connect to your phone or other
Bluetooth®-ready device
Power Input
Micro-USB to USB
Insert a TF card (not included)
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interferenceto radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20cm between the radiator and your body.