YG-1540001/2 HARDWARE SPECIFICATION Document No: TNS21252 PRODUCT & DELIVERY HARDWARE SPECIFICAION MODEL NAME :YG-1540001 :YG-1540002 Hitachi High-Tech Nexus Corporation Tokyo Communication Equipment Manufacturing Co., Ltd. TNS21252 Rev1.
YG-1540001/2 HARDWARE SPECIFICATION Table of Contents 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. TNS21252 Rev1.
YG-1540001/2 HARDWARE SPECIFICATION 1.Scope This product is the 13.56MHz RFID R/W module. It supports the ISO/IEC15693. ■ Product name: :YG-1540001,YG-1540002 ■ Main specification Item RFID Tag Communication Frequency I/F Function ISO15693(Tag-it HF-I Plus/Pro、I・CODE SLI) 13.56MHz ±7kHz 38400bps (+0.
YG-1540001/2 HARDWARE SPECIFICATION ■ Supports Legal Regulation This product complies with the regulations of the Radio Law of the United States and Canada (FCC, IC) and is certified. Model Name:YG-1540001 FCC ID:WSLYG1540001 IC:8213A-YG1540001 Model Name:YG-1540002 FCC ID:WSLYG1540002 IC:8213A-YG1540002 ・This device complies with Part 15 of the FCC Rules and RSS-Gen of IC Rules.
YG-1540001/2 HARDWARE SPECIFICATION 2.System Configuration POWER SUPPLY YG-1540001-1 RS422 ※ ※ RS422 Device Address is defined by the Hardware setting. YG-1540001-2 ・YG-1540001-1 R3 Mounted ・YG-1540001-2 R4 Mounted ・YG-1540002 R3, R4, R5, R6 All not mounted TNS21252 Rev1.
YG-1540001/2 HARDWARE SPECIFICATION 3.Aspect 3.1 YG-1540001 < TOP > < BACK > UNIT(mm) Material :FR-4 Layer4 Thick :1.0mm Think of Copper :18μm Margin :0.1mmm ●CN1 No 1 2 3 4 TNS21252 Rev1.
YG-1540001/2 HARDWARE SPECIFICATION ●CN2 SM06B-GHS-TB(JST) No Name 1 VIN POWER 2 GND GND 3 A 422I/F 4 B 422I/F 5 Z 422I/F 6 Y 422I/F Function A B Z Y YG-1540001 is used with Moleded plastic case. (Specifications of plastic case may change) YG-1540001 < Plastic Case (example) > ※ When using this device for the final products outside Japan, indicate the FCC ID and IC lighting number on the surface of the plastic case with a label or the like. If you cannot attach a label, etc.
YG-1540001/2 HARDWARE SPECIFICATION 3.2 YG-1540002 < TOP > Material Thick Think of Copper Margin TNS21252 Rev1.0 < BACK > UNIT (mm) :FR-4 Layer4 :1.0mm :18μm :0.
YG-1540001/2 HARDWARE SPECIFICATION ●PIN ARRAYS TH CT1 CT2 CT3 CT4 CT5 CT6 CT7 ●Wire Item Wire Length Terminate Attach SIGNAL VIN GND A B Z Y FS1 Function POWER GND 422I/F A 422I/F B 422I/F Z 422I/F Y Photo Interrupter Description UL1061 AWG28 200mm(+20mm,-0mm) For PCB For device ① ② For device ③ housing retainer Contents “Line color” is described in the figure below Not including terminals SIN-002T-1.0(JST) Solder SPND-002T-C0.5(JST) SXA-001T-P0.
YG-1540001/2 HARDWARE SPECIFICATION YG-1540002 is used with Moleded plastic case. (Specifications of plastic case may change) YG-1540002 Wire Exit < Plastic Case (Cylindrical Type) > ※ When using this device for the final products outside Japan, indicate the FCC ID and IC lighting number on the surface of the plastic case with a label or the like. If you cannot attach a label, etc., refer to the FCC ID and IC lighting number described in this manual instead of indicated them(P4).
YG-1540001/2 HARDWARE SPECIFICATION 7.RFID Tag Command List No Function Code Tag-it HF-I Pro Tag-it HF-I Plus I・CODE SLI 1 Inventory Command Name H'01 ○ ○ ○ 2 StayQuiet H'02 ○ ○ ○ 3 ReadSingleBlock H'20 ○ ○ ○ 4 WriteSingleBlock H'21 ○ ○ ○ 5 LockBlock H'22 ○ ○ ○ 6 ReadMultipleBlocks H'23 ×1 ○ ○ 7 WriteAFI H'27 ×1 ○ ○ 8 LockAFI H'28 ×1 ○ ○ 9 WriteDSFID H'29 ×1 ○ ○ 10 LockDSFID H'2A ×1 ○ ○ 11 GetSystemInformation H'2B ×1 ○ ○ 12 WriteSing
YG-1540001/2 HARDWARE SPECIFICATION 8.Production Flow Solder Print Components Mount Mounting of electronic components Re-Flow Aspect Inspection Splitting PCB Wire Assemble※ Wire Aspect Inspect※ Test Inspect about the condition of the PCB Split the sheet of the PCB Wire Assemble Inspect about the condition of the Wires. Function Test Final Aspect inspect Packing Inspect about the final production.
YG-1540001/2 HARDWARE SPECIFICATION 10.Shipping We pack it so that quality isn't damaged during transportation. 11.Warranty If any defect arises in the product mentioned in this document within six month after delivery, and Supplier is Assumed to be responsible for it, and such the product is undoubtedly out of specification, the product shall be returned and replaced with a new product or a re-tested product by Supplier at Supplier's cost.