User Manual

Bluetooth Remote Manual
1.Turn the power switch to the ON position,
the LED light flashing blue and red indication it is
in paring mode.
2.In your Samsung or
I phone or device. Go
to settings-general
bluetooth and ensure
that Bluetooth is on.
3.Select ”YunTeng”
from the devices list.
1.Turn the power switch
to the ON position, the
LED light flashing blue
and red indication it is
in paring mode.
4. Pairing will read, “Connected”. You are
ready to go!
5. I phone (IOS system) do not have zoom
function, only can take pictures.
6. As there’s a variety of Android mobile phones
on the market, most of them with Android
system 5 or newer, set the volume key as zoom
key, some Android
phone may not be
able to use the
camera function at
the same time, only
a few Android
phones support
camera and zoom
functions together.
Note:
1. If the device can not be connected, please
make sure that the remote control has enough
power. Also, check if there is any other Bluetooth
devices in the connected list, if so disconnect
them, then reopen the remote control to pare