Yuneec™ SMARTRADIO™ ST24™ Quick Start Guide
Features Transmitter and Ground Station – All in One The ST24 is not only an advanced 24-channel RC transmitter – it’s also a powerful Personal Ground Station (PGS) that includes built-in hardware and functionality for First-Person View (FPV), a flight simulator and an Android™ tablet/pad. With the convenient and portable ST24 it’s no longer necessary to use separate components to view and even record real-time video during flight. Improved Radio Diversity and Range Dual 2.
means you have more functionality, flexibility and convenience packed into your very own Personal Ground Station (PGS).
IMPORTANT NOTE: This Quick Start Guide is NOT intended to replace the complete content included in the ST24 instruction manual. Although the following information covers some of the basic details you need to know we strongly recommend reading through the instruction manual completely before charging/using the ST24. Charging Your ST24 Use a suitable power source/supply (1.5A and 5V MAX output) and a cable with a Micro USB connector to charge the 3.7V Li-Ion battery installed in the ST24.
minimize the risk of accidentally powering the transmitter off during use Power Switch Tap the RC button/icon Tap the Model Select button/icon Select the type of model (Multi-copter, Airplane, etc.
Select an existing model or create a New Model To create a new model tap the New Model button/icon Give the new model a name, take or select an image (optional), select a type (if applicable) then Save the new model 2.
Tap the Refresh button/icon Select the corresponding ID of the receiver/model Tap the Bind button/icon The receiver/model should now be bound to the ST24. Or, if the receiver/model was not bound successfully repeat the steps outlined above to complete the binding process. 3.
Tap the Channel Settings button/icon NOTE: If the ST24 did not recognize the receiver/model and automatically identify the number and type of channels a corresponding menu will pop-up and you will be prompted to set the number of analog and switch channels accordingly Select the output channel/function (Thr, A01, etc) you’d like to view If you prefer to change the default input device/hardware (J1, K2, S3, etc.
You can also define which switch controls the Flight Mode. There are multiple levels of mixing priorities. The highest level input device/hardware will be processed first. There are multiple types of basic expo and control curves that can be selected for each output channel/function. If you want to adjust any curve you can use the buttons above and below the graph or you can touch the curve on the graph directly. Reverse, Dual Rate (D/R) and even output Speed can be changed as needed/preferred.
Using Your ST24 In the First-Person View (FPV) Mode For FPV/camera-equipped models 1.
Select the type of model (Multi-copter, Airplane, etc.) you’d like to create or load Select an existing model or create a New Model To create a new model tap the New Model button/icon Give the new model a name, take or select an image (optional), select a type (if applicable) then Save the new model 2.
Tap the System Settings button/icon Tap the FPV button/icon then press the Refresh button/icon Select the corresponding ID of the receiver/model 12
Select the corresponding ID of the camera and/or downlink transmitter associated with your aircraft NOTE: Follow the instructions included with your camera and/or downlink transmitter if needed to ensure they’re already bound to or that they can be bound to the ST24 Tap the Bind button/icon The receiver/model should now be bound to the ST24. Or, if the receiver/model was not bound successfully repeat the steps outlined above to complete the binding process. 3.
Tap the Channel Settings button/icon NOTE: If the ST24 did not recognize the receiver/model and automatically identify the number and type of channels a corresponding menu will pop-up and you will be prompted to set the number of analog and switch channels accordingly Select the output channel/function (Thr, A01, etc) you’d like to view If you prefer to change the default input device/hardware (J1, K2, S3, etc.
NOTE: You can set Priority, Edit, Deactivate or view the Properties of each channel. You can also define which switch controls the Flight Mode. There are multiple levels of mixing priorities. The highest level input device/hardware will be processed first. There are multiple types of basic expo and control curves that can be selected for each output channel/function. If you want to adjust any curve you can use the buttons above and below the graph or you can touch the curve on the graph directly.
Using Your ST24 In the Simulator (SIM) Mode Power on the ST24 and enter SIM mode Slide the Power Switch to the left to power on the ST24 Power Switch Tap the SIM button/icon Follow the on-screen instructions Using Your ST24 In the Tablet/Pad (PAD) Mode Power on the ST24 and enter PAD mode Slide the Power Switch to the left to power on the ST24 Power Switch 16
Tap the PAD button/icon Use the LCD screen as a typical Android™ tablet/pad ©2014 FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2.
